[Tue May 22 23:15:10 2012] Detection parameters:
  Position = (139.1, 315.5) = 14 53 29.14 16 47 40.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59.6 +/- 13.7
  Background counts = 46.1
  Rate = 0.002 +/- 0.0005

[Tue May 22 23:15:11 2012] Off-axis axis estimate = 11.62'
[Tue May 22 23:19:25 2012] Using EEF radius (= 12.24 ")to estimate initial spatial extent for simple fitting
[Tue May 22 23:19:25 2012] Initial guess for spatial extent in simple fitting = 12.24"
[Tue May 22 23:19:25 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.957
[Tue May 22 23:19:25 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 12.24"
[Wed May 23 02:31:41 2012] fullrun_pn_xmm0091140201_pi300-10000_cl_pass0_src27.ximg exists
[Wed May 23 02:31:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0091140201_pi300-10000_cl_pass0_src27.csv
[Wed May 23 02:31:41 2012] fullrun_pn_xmm0091140201_pi300-10000_cl_pass0_src27_1.ximg exists
[Wed May 23 02:31:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0091140201_pi300-10000_cl_pass0_src27.csv
[Wed May 23 02:31:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0091140201_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0091140201_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 02:31:43 2012] fullrun_pn_xmm0091140201_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Wed May 23 02:31:43 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0091140201_pi300-10000_cl_pass0_tfrozen_src27.csv
[Wed May 23 02:31:43 2012] fullrun_pn_xmm0091140201_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Wed May 23 02:31:43 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0091140201_pi300-10000_cl_pass0_tfrozen_src27.csv
[Wed May 23 02:31:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0091140201_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0091140201_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 07:19:47 2012] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 16.202064 pixels away
[Wed May 23 07:19:47 2012] Vigneting correction estimate = 1.000000
[Wed May 23 07:19:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 07:19:47 2012] Assessing source extent using major
[Wed May 23 07:19:47 2012] Source does appear to be extended
[Wed May 23 07:19:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 07:19:47 2012] Deleting source due to low Poisson probability 0.9