[Tue May 22 23:15:09 2012] Detection parameters:
  Position = (312.8, 449.4) = 14 52 36.52 16 57 24.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 58.4 +/- 11.1
  Background counts = 40.2
  Rate = 0.002 +/- 0.0004

[Tue May 22 23:15:11 2012] Off-axis axis estimate = 11.00'
[Tue May 22 23:19:25 2012] Using EEF radius (= 11.93 ")to estimate initial spatial extent for simple fitting
[Tue May 22 23:19:25 2012] Initial guess for spatial extent in simple fitting = 11.93"
[Tue May 22 23:19:25 2012] source mask rpix=2.7, npix_max = 42, mask sum = 33, frac = 0.785
[Tue May 22 23:19:25 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 11.93"
[Wed May 23 02:31:41 2012] fullrun_pn_xmm0091140201_pi300-10000_cl_pass0_src11.ximg exists
[Wed May 23 02:31:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0091140201_pi300-10000_cl_pass0_src11.csv
[Wed May 23 02:31:41 2012] fullrun_pn_xmm0091140201_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed May 23 02:31:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0091140201_pi300-10000_cl_pass0_src11.csv
[Wed May 23 02:31:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0091140201_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0091140201_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 02:31:42 2012] fullrun_pn_xmm0091140201_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed May 23 02:31:42 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0091140201_pi300-10000_cl_pass0_tfrozen_src11.csv
[Wed May 23 02:31:42 2012] fullrun_pn_xmm0091140201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed May 23 02:31:42 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0091140201_pi300-10000_cl_pass0_tfrozen_src11.csv
[Wed May 23 02:31:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0091140201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0091140201_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 07:19:47 2012] Source 11 is offset by -3.273174 and -1.361394 pixels which is larger than
2 X fitted extent = 1.370952 x 1.370952, not incorporating fit results
[Wed May 23 07:19:47 2012] Vigneting correction estimate = 1.000000
[Wed May 23 07:19:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 07:19:47 2012] Assessing source extent using major
[Wed May 23 07:19:47 2012] Source does appear to be extended
[Wed May 23 07:19:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 07:19:47 2012] Deleting source due to low Poisson probability 0.9