[Tue May 22 23:16:34 2012] Detection parameters:
  Position = (230.1, 244.0) = 14 53 1.57 16 42 25.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.3 +/- 16.6
  Background counts = 42.4
  Rate = 0.004 +/- 0.0006

[Tue May 22 23:16:34 2012] Off-axis axis estimate = 6.33'
[Wed May 23 04:43:32 2012] Using EEF radius (= 9.60 ")to estimate initial spatial extent for simple fitting
[Wed May 23 04:43:32 2012] Initial guess for spatial extent in simple fitting = 9.60"
[Wed May 23 04:43:32 2012] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.229
[Wed May 23 04:43:32 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 9.60"
[Wed May 23 07:19:22 2012] fullrun_mos2_xmm0091140201_pi300-10000_cl_pass0_src21.ximg exists
[Wed May 23 07:19:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0091140201_pi300-10000_cl_pass0_src21.csv
[Wed May 23 07:19:22 2012] fullrun_mos2_xmm0091140201_pi300-10000_cl_pass0_src21_1.ximg exists
[Wed May 23 07:19:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0091140201_pi300-10000_cl_pass0_src21.csv
[Wed May 23 07:19:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0091140201_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0091140201_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 07:19:23 2012] fullrun_mos2_xmm0091140201_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Wed May 23 07:19:23 2012] fullrun_mos2_xmm0091140201_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Wed May 23 07:19:23 2012] Fit fullrun_mos2_xmm0091140201_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Wed May 23 07:20:09 2012] Warning, spatial fit 21 centroid is now closest to src. 37
[Wed May 23 07:20:09 2012] Source 35 is offset by -2.987613 and 4.956186 pixels which is larger than
2 X fitted extent = 1.775154 x 1.775154, not incorporating fit results
[Wed May 23 07:20:09 2012] Vigneting correction estimate = 1.000000
[Wed May 23 07:20:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 07:20:09 2012] Assessing source extent using major
[Wed May 23 07:20:09 2012] Source does appear to be extended
[Wed May 23 07:20:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 07:20:09 2012] Source is confused with source 7
[Wed May 23 07:20:09 2012] Source is confused with source 37
[Wed May 23 12:11:04 2012] Using EEF radius (= 9.60 ")to estimate initial spatial extent for simple fitting
[Wed May 23 12:11:04 2012] Initial guess for spatial extent in simple fitting = 9.60"
[Wed May 23 12:11:04 2012] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.229
[Wed May 23 12:11:04 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 9.60"
[Wed May 23 15:10:32 2012] fullrun_mos2_xmm0091140201_pi300-10000_cl_pass1_src18.ximg exists
[Wed May 23 15:10:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0091140201_pi300-10000_cl_pass1_src18.csv
[Wed May 23 15:10:32 2012] fullrun_mos2_xmm0091140201_pi300-10000_cl_pass1_src18_1.ximg exists
[Wed May 23 15:10:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0091140201_pi300-10000_cl_pass1_src18.csv
[Wed May 23 15:10:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0091140201_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0091140201_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 15:10:33 2012] fullrun_mos2_xmm0091140201_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Wed May 23 15:10:33 2012] fullrun_mos2_xmm0091140201_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Wed May 23 15:10:33 2012] Fit fullrun_mos2_xmm0091140201_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Wed May 23 15:11:12 2012] Warning, spatial fit 18 centroid is now closest to src. 37
[Wed May 23 15:11:12 2012] Vigneting correction estimate = 1.000000
[Wed May 23 15:11:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 15:11:12 2012] Assessing source extent using major
[Wed May 23 15:11:12 2012] Source does appear to be extended
[Wed May 23 15:11:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 18:13:08 2012] XMMSAS src. selection expression = ellipse(19970.241684, 21182.038208, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 23 18:13:08 2012] Writing source region out to fullrun_mos2_xmm0091140201_pi300-10000_pass1_cl_src35_src.reg
[Wed May 23 18:13:08 2012] Extracting stamp from image fullrun_mos2_xmm0091140201_pi300-10000_cl_sm2.00.img.gz, (193, 207) - (268, 282)
[Wed May 23 18:13:08 2012] XMMSAS bgd. selection expression = annulus(19970.241684, 21182.038208, 1087.500000, 2175.000000, X, Y) && !ellipse(21840.806000, 20887.362000, 302.460809, 302.460809, 0.000000, X, Y) && !ellipse(21342.250641, 20989.531326, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21273.484055, 20567.421494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20003.519821, 24124.949677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20599.280000, 20461.984800, 1500.680043, 1500.680043, 0.000000, X, Y) && !ellipse(22049.324000, 21922.628000, 1296.704037, 1296.704037, 0.000000, X, Y) && !ellipse(20393.014000, 21215.365600, 1535.200044, 1535.200044, 0.000000, X, Y) && !ellipse(21057.790802, 22393.716583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22591.782000, 19311.126000, 1468.560042, 1468.560042, 0.000000, X, Y) && !ellipse(18649.731003, 20797.122681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20609.185104, 19446.818588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21516.737839, 22733.135529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21345.793777, 19438.562775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23002.687378, 22090.725967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20066.692261, 22120.075989, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 23 18:13:08 2012] Writing fullrun_mos2_xmm0091140201_pi300-10000_pass1_cl_src35.gif
[Wed May 23 18:20:30 2012] Mean detx,y = (-5321.76, 2192.63) 
[Wed May 23 18:20:33 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 23 18:21:08 2012] Binned source spectrum to 10 counts/bin
[Wed May 23 18:21:08 2012] Setting source spectrum file to fullrun_mos2_xmm0091140201_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Wed May 23 18:21:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0091140201_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Wed May 23 18:43:40 2012] Not generating rmf since there are only 96 counts
[Wed May 23 18:43:40 2012] rmf not generated due to insufficient counts
[Wed May 23 18:51:20 2012] Updating aperture counts using extracted products
[Wed May 23 18:51:20 2012] Error reading totcts from fullrun_mos2_xmm0091140201_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Wed May 23 18:51:22 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 23 18:51:22 2012] Using photon index=1.80, rate=0.00376, arf fullrun_mos2_xmm0091140201_pi300-10000_pass1_cl_src35.arf
[Wed May 23 18:51:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 23 18:51:22 2012] Updating source flux to 4.7e-14
[Wed May 23 18:54:07 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting