[Tue May 22 23:16:34 2012] Detection parameters:
  Position = (315.2, 264.1) = 14 52 35.81 16 43 52.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 79.9 +/- 13.0
  Background counts = 26.0
  Rate = 0.003 +/- 0.0005

[Tue May 22 23:16:34 2012] Off-axis axis estimate = 2.77'
[Wed May 23 04:43:32 2012] Using EEF radius (= 7.82 ")to estimate initial spatial extent for simple fitting
[Wed May 23 04:43:32 2012] Initial guess for spatial extent in simple fitting = 7.82"
[Wed May 23 04:43:32 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.758
[Wed May 23 04:43:32 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 7.82"
[Wed May 23 07:19:22 2012] fullrun_mos2_xmm0091140201_pi300-10000_cl_pass0_src27.ximg exists
[Wed May 23 07:19:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0091140201_pi300-10000_cl_pass0_src27.csv
[Wed May 23 07:19:22 2012] fullrun_mos2_xmm0091140201_pi300-10000_cl_pass0_src27_1.ximg exists
[Wed May 23 07:19:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0091140201_pi300-10000_cl_pass0_src27.csv
[Wed May 23 07:19:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0091140201_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0091140201_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 07:19:23 2012] fullrun_mos2_xmm0091140201_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Wed May 23 07:19:23 2012] fullrun_mos2_xmm0091140201_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Wed May 23 07:19:23 2012] Fit fullrun_mos2_xmm0091140201_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Wed May 23 07:20:09 2012] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 10.813527 pixels away
[Wed May 23 07:20:09 2012] Vigneting correction estimate = 1.000000
[Wed May 23 07:20:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 07:20:09 2012] Assessing source extent using major
[Wed May 23 07:20:09 2012] Source does appear to be extended
[Wed May 23 07:20:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 12:11:04 2012] Using EEF radius (= 7.82 ")to estimate initial spatial extent for simple fitting
[Wed May 23 12:11:04 2012] Initial guess for spatial extent in simple fitting = 7.82"
[Wed May 23 12:11:04 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.758
[Wed May 23 12:11:04 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 7.82"
[Wed May 23 15:10:32 2012] fullrun_mos2_xmm0091140201_pi300-10000_cl_pass1_src24.ximg exists
[Wed May 23 15:10:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0091140201_pi300-10000_cl_pass1_src24.csv
[Wed May 23 15:10:32 2012] fullrun_mos2_xmm0091140201_pi300-10000_cl_pass1_src24_1.ximg exists
[Wed May 23 15:10:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0091140201_pi300-10000_cl_pass1_src24.csv
[Wed May 23 15:10:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0091140201_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0091140201_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 15:10:33 2012] fullrun_mos2_xmm0091140201_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Wed May 23 15:10:33 2012] fullrun_mos2_xmm0091140201_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Wed May 23 15:10:33 2012] Fit fullrun_mos2_xmm0091140201_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Wed May 23 15:11:12 2012] Source 25 is offset by 6.578176 and 6.239941 pixels which is larger than
2 X fitted extent = 1.491633 x 1.491633, not incorporating fit results
[Wed May 23 15:11:12 2012] Vigneting correction estimate = 1.000000
[Wed May 23 15:11:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 15:11:12 2012] Assessing source extent using major
[Wed May 23 15:11:12 2012] Source does appear to be extended
[Wed May 23 15:11:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 18:13:08 2012] XMMSAS src. selection expression = ellipse(27372.937286, 22924.172852, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 23 18:13:08 2012] Writing source region out to fullrun_mos2_xmm0091140201_pi300-10000_pass1_cl_src25_src.reg
[Wed May 23 18:13:08 2012] Extracting stamp from image fullrun_mos2_xmm0091140201_pi300-10000_cl_sm2.00.img.gz, (278, 227) - (353, 302)
[Wed May 23 18:13:08 2012] XMMSAS bgd. selection expression = annulus(27372.937286, 22924.172852, 1087.500000, 2175.000000, X, Y)
[Wed May 23 18:13:08 2012] Writing fullrun_mos2_xmm0091140201_pi300-10000_pass1_cl_src25.gif
[Wed May 23 18:23:55 2012] Mean detx,y = (2195.78, 1556.96) 
[Wed May 23 18:23:57 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 23 18:24:11 2012] Binned source spectrum to 10 counts/bin
[Wed May 23 18:24:11 2012] Setting source spectrum file to fullrun_mos2_xmm0091140201_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Wed May 23 18:24:11 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0091140201_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Wed May 23 18:48:56 2012] Not generating rmf since there are only 79 counts
[Wed May 23 18:48:56 2012] rmf not generated due to insufficient counts
[Wed May 23 18:51:21 2012] Updating aperture counts using extracted products
[Wed May 23 18:51:21 2012] Error reading totcts from fullrun_mos2_xmm0091140201_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Wed May 23 18:51:22 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 23 18:51:22 2012] Using photon index=1.80, rate=0.0028, arf fullrun_mos2_xmm0091140201_pi300-10000_pass1_cl_src25.arf
[Wed May 23 18:51:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 23 18:51:22 2012] Updating source flux to 2.9e-14
[Wed May 23 18:54:07 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting