[Tue May 22 23:15:42 2012] Detection parameters:
  Position = (254.9, 231.8) = 14 52 54.07 16 41 27.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 136.0 +/- 17.7
  Background counts = 38.0
  Rate = 0.007 +/- 0.0009

[Tue May 22 23:15:42 2012] Off-axis axis estimate = 5.77'
[Wed May 23 02:31:43 2012] Using EEF radius (= 9.31 ")to estimate initial spatial extent for simple fitting
[Wed May 23 02:31:43 2012] Initial guess for spatial extent in simple fitting = 9.31"
[Wed May 23 02:31:43 2012] source mask rpix=2.1, npix_max = 27, mask sum = 15, frac = 0.537
[Wed May 23 02:31:43 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 9.31"
[Wed May 23 04:43:30 2012] fullrun_mos1_xmm0091140201_pi300-10000_cl_pass0_src7.ximg exists
[Wed May 23 04:43:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0091140201_pi300-10000_cl_pass0_src7.csv
[Wed May 23 04:43:30 2012] fullrun_mos1_xmm0091140201_pi300-10000_cl_pass0_src7_1.ximg exists
[Wed May 23 04:43:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0091140201_pi300-10000_cl_pass0_src7.csv
[Wed May 23 04:43:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0091140201_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0091140201_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 04:43:31 2012] fullrun_mos1_xmm0091140201_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Wed May 23 04:43:31 2012] fullrun_mos1_xmm0091140201_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Wed May 23 04:43:31 2012] Fit fullrun_mos1_xmm0091140201_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Wed May 23 07:19:59 2012] Warning, spatial fit 7 centroid is now closest to src. 29
[Wed May 23 07:19:59 2012] Source 37 is offset by 3.508848 and 3.806313 pixels which is larger than
2 X fitted extent = 1.157241 x 1.157241, not incorporating fit results
[Wed May 23 07:19:59 2012] Vigneting correction estimate = 1.000000
[Wed May 23 07:19:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 07:19:59 2012] Assessing source extent using major
[Wed May 23 07:19:59 2012] Source does appear to be extended
[Wed May 23 07:19:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 07:19:59 2012] Source is confused with source 2
[Wed May 23 09:24:20 2012] Using EEF radius (= 9.31 ")to estimate initial spatial extent for simple fitting
[Wed May 23 09:24:20 2012] Initial guess for spatial extent in simple fitting = 9.31"
[Wed May 23 09:24:20 2012] source mask rpix=2.1, npix_max = 27, mask sum = 15, frac = 0.537
[Wed May 23 09:24:20 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 9.31"
[Wed May 23 12:11:03 2012] fullrun_mos1_xmm0091140201_pi300-10000_cl_pass1_src6.ximg exists
[Wed May 23 12:11:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0091140201_pi300-10000_cl_pass1_src6.csv
[Wed May 23 12:11:03 2012] fullrun_mos1_xmm0091140201_pi300-10000_cl_pass1_src6_1.ximg exists
[Wed May 23 12:11:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0091140201_pi300-10000_cl_pass1_src6.csv
[Wed May 23 12:11:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0091140201_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0091140201_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 12:11:03 2012] fullrun_mos1_xmm0091140201_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Wed May 23 12:11:04 2012] fullrun_mos1_xmm0091140201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Wed May 23 12:11:04 2012] Fit fullrun_mos1_xmm0091140201_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Wed May 23 15:11:02 2012] Source 37 is offset by 4.125606 and 4.529118 pixels which is larger than
2 X fitted extent = 1.091467 x 1.091467, not incorporating fit results
[Wed May 23 15:11:02 2012] Warning, spatial fit 6 centroid is now closest to src. 2
[Wed May 23 15:11:02 2012] Source 37 is offset by 2.195376 and -8.698468 pixels which is larger than
2 X fitted extent = 6.951678 x 6.951678, not incorporating fit results
[Wed May 23 15:11:02 2012] Source 37 is offset by 3.503054 and 3.847601 pixels which is larger than
2 X fitted extent = 1.121145 x 1.121145, not incorporating fit results
[Wed May 23 15:11:02 2012] Vigneting correction estimate = 1.000000
[Wed May 23 15:11:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 15:11:02 2012] Assessing source extent using major
[Wed May 23 15:11:02 2012] Source does appear to be extended
[Wed May 23 15:11:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 16:58:21 2012] XMMSAS src. selection expression = ellipse(22124.087738, 20117.873260, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 23 16:58:21 2012] Writing source region out to fullrun_mos1_xmm0091140201_pi300-10000_pass1_cl_src37_src.reg
[Wed May 23 16:58:21 2012] Extracting stamp from image fullrun_mos1_xmm0091140201_pi300-10000_cl_sm2.00.img.gz, (217, 194) - (292, 269)
[Wed May 23 16:58:21 2012] XMMSAS bgd. selection expression = annulus(22124.087738, 20117.873260, 1087.500000, 2175.000000, X, Y) && !ellipse(21783.152000, 20660.320000, 1490.392043, 1490.392043, 0.000000, X, Y) && !ellipse(21738.312000, 21018.950000, 982.352028, 238.252007, 353.072830, X, Y) && !ellipse(20706.190000, 21391.022800, 1469.312042, 1469.312042, 0.000000, X, Y) && !ellipse(21040.729584, 20399.668777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21614.232000, 22600.834000, 1416.688041, 923.536027, 312.484000, X, Y) && !ellipse(20652.160000, 22609.250000, 1443.600042, 1443.600042, 0.000000, X, Y) && !ellipse(20048.331406, 21012.061905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22415.352417, 22244.331360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20530.676000, 20040.838000, 1519.320044, 1519.320044, 0.000000, X, Y) && !ellipse(22645.137238, 20491.414642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21620.615860, 19188.772308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19271.010000, 22346.200000, 1519.232044, 1519.232044, 0.000000, X, Y) && !ellipse(24006.772000, 21052.196400, 1471.648042, 366.416011, 46.915000, X, Y) && !ellipse(22887.220000, 21264.412400, 1076.808031, 1076.808031, 0.000000, X, Y) && !ellipse(19482.682000, 21067.164600, 1538.328044, 1538.328044, 0.000000, X, Y)
[Wed May 23 16:58:21 2012] Writing fullrun_mos1_xmm0091140201_pi300-10000_pass1_cl_src37.gif
[Wed May 23 17:00:40 2012] Mean detx,y = (3606.37, 3307.72) 
[Wed May 23 17:00:42 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 23 17:00:59 2012] Binned source spectrum to 10 counts/bin
[Wed May 23 17:00:59 2012] Setting source spectrum file to fullrun_mos1_xmm0091140201_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Wed May 23 17:00:59 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0091140201_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Wed May 23 17:28:57 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 23 17:28:57 2012] rmf not generated due to insufficient counts
[Wed May 23 18:51:16 2012] Updating aperture counts using extracted products
[Wed May 23 18:51:16 2012] Error reading totcts from fullrun_mos1_xmm0091140201_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Wed May 23 18:51:18 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 23 18:51:18 2012] Using photon index=1.80, rate=0.00658, arf fullrun_mos1_xmm0091140201_pi300-10000_pass1_cl_src37.arf
[Wed May 23 18:51:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 23 18:51:18 2012] Updating source flux to 7.5e-14
[Wed May 23 18:51:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting