[Tue May 22 23:15:42 2012] Detection parameters:
  Position = (246.1, 266.9) = 14 52 56.74 16 44 5.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71.9 +/- 14.4
  Background counts = 44.3
  Rate = 0.002 +/- 0.0005

[Tue May 22 23:15:42 2012] Off-axis axis estimate = 4.43'
[Wed May 23 02:31:43 2012] Using EEF radius (= 8.64 ")to estimate initial spatial extent for simple fitting
[Wed May 23 02:31:43 2012] Initial guess for spatial extent in simple fitting = 8.64"
[Wed May 23 02:31:43 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.010
[Wed May 23 02:31:43 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 8.64"
[Wed May 23 04:43:31 2012] fullrun_mos1_xmm0091140201_pi300-10000_cl_pass0_src31.ximg exists
[Wed May 23 04:43:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0091140201_pi300-10000_cl_pass0_src31.csv
[Wed May 23 04:43:31 2012] fullrun_mos1_xmm0091140201_pi300-10000_cl_pass0_src31_1.ximg exists
[Wed May 23 04:43:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0091140201_pi300-10000_cl_pass0_src31.csv
[Wed May 23 04:43:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0091140201_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0091140201_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 04:43:32 2012] fullrun_mos1_xmm0091140201_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Wed May 23 04:43:32 2012] fullrun_mos1_xmm0091140201_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Wed May 23 04:43:32 2012] Fit fullrun_mos1_xmm0091140201_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Wed May 23 07:19:59 2012] Source 22 is offset by 7.774885 and -3.793379 pixels which is larger than
2 X fitted extent = 1.035016 x 1.035016, not incorporating fit results
[Wed May 23 07:19:59 2012] Spatial fit model total counts = 786.820000, observed total counts = 787.000000
[Wed May 23 07:19:59 2012] Offset between fit and detection position for source 22 = 0.179525 pixels
[Wed May 23 07:19:59 2012] 781.282300 total counts/ 763.313000 bgd. counts: snr = 0.650399
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.179525 pixels
  Position = (246.0, 267.1) = 14 52 56.75 16 44 5.5
  Extent = 3.2 (2.2-6.8)", rotation angle = 0
  Source counts = 18.0 +/- 28.0
  Background counts = 763.3
  Rate = 0.0006 +/- 0.0009
  Deleting source due to low Poisson probability