[Tue May 22 23:15:41 2012] Detection parameters:
  Position = (403.5, 374.3) = 14 52 9.05 16 51 52.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.1 +/- 11.2
  Background counts = 12.1
  Rate = 0.002 +/- 0.0004

[Tue May 22 23:15:42 2012] Off-axis axis estimate = 9.39'
[Wed May 23 02:31:43 2012] Using EEF radius (= 11.13 ")to estimate initial spatial extent for simple fitting
[Wed May 23 02:31:43 2012] Initial guess for spatial extent in simple fitting = 11.13"
[Wed May 23 02:31:43 2012] source mask rpix=2.6, npix_max = 37, mask sum = 42, frac = 1.123
[Wed May 23 02:31:43 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 11.13"
[Wed May 23 04:43:31 2012] fullrun_mos1_xmm0091140201_pi300-10000_cl_pass0_src33.ximg exists
[Wed May 23 04:43:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0091140201_pi300-10000_cl_pass0_src33.csv
[Wed May 23 04:43:31 2012] fullrun_mos1_xmm0091140201_pi300-10000_cl_pass0_src33_1.ximg exists
[Wed May 23 04:43:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0091140201_pi300-10000_cl_pass0_src33.csv
[Wed May 23 04:43:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0091140201_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0091140201_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 04:43:32 2012] fullrun_mos1_xmm0091140201_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Wed May 23 04:43:32 2012] fullrun_mos1_xmm0091140201_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Wed May 23 04:43:32 2012] Fit fullrun_mos1_xmm0091140201_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Wed May 23 07:19:59 2012] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 13.217706 pixels away
[Wed May 23 07:19:59 2012] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 15.288377 pixels away
[Wed May 23 07:19:59 2012] Vigneting correction estimate = 1.000000
[Wed May 23 07:19:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 07:19:59 2012] Assessing source extent using major
[Wed May 23 07:19:59 2012] Source does appear to be extended
[Wed May 23 07:19:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 09:24:20 2012] Using EEF radius (= 11.13 ")to estimate initial spatial extent for simple fitting
[Wed May 23 09:24:20 2012] Initial guess for spatial extent in simple fitting = 11.13"
[Wed May 23 09:24:20 2012] source mask rpix=2.6, npix_max = 37, mask sum = 42, frac = 1.123
[Wed May 23 09:24:20 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 11.13"
[Wed May 23 12:11:03 2012] fullrun_mos1_xmm0091140201_pi300-10000_cl_pass1_src29.ximg exists
[Wed May 23 12:11:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0091140201_pi300-10000_cl_pass1_src29.csv
[Wed May 23 12:11:03 2012] fullrun_mos1_xmm0091140201_pi300-10000_cl_pass1_src29_1.ximg exists
[Wed May 23 12:11:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0091140201_pi300-10000_cl_pass1_src29.csv
[Wed May 23 12:11:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0091140201_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0091140201_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 12:11:04 2012] fullrun_mos1_xmm0091140201_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Wed May 23 12:11:04 2012] fullrun_mos1_xmm0091140201_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Wed May 23 12:11:04 2012] Fit fullrun_mos1_xmm0091140201_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Wed May 23 15:11:02 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 11.998926 pixels away
[Wed May 23 15:11:02 2012] Spatial fit model total counts = 186.432000, observed total counts = 185.000000
[Wed May 23 15:11:02 2012] Offset between fit and detection position for source 15 = 0.352083 pixels
[Wed May 23 15:11:02 2012] 187.855900 total counts/ 139.829000 bgd. counts: snr = 4.061495
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.352083 pixels
  Position = (403.1, 374.4) = 14 52 9.15 16 51 52.1
  Extent = 5.8 (3.5-9.2)", rotation angle = 0
  Source counts = 48.0 +/- 13.7
  Background counts = 139.8
  Rate = 0.002 +/- 0.0004
[Wed May 23 15:11:02 2012] Vigneting correction estimate = 1.000000
[Wed May 23 15:11:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 15:11:02 2012] Assessing source extent using major axis lower bound
[Wed May 23 15:11:02 2012] Source does appear to be extended
[Wed May 23 15:11:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 16:58:21 2012] XMMSAS src. selection expression = ellipse(35024.140800, 32525.238800, 345.822010, 345.822010, 0.000000, X, Y)
[Wed May 23 16:58:21 2012] Writing source region out to fullrun_mos1_xmm0091140201_pi300-10000_pass1_cl_src15_src.reg
[Wed May 23 16:58:21 2012] Extracting stamp from image fullrun_mos1_xmm0091140201_pi300-10000_cl_sm2.00.img.gz, (383, 355) - (423, 394)
[Wed May 23 16:58:21 2012] XMMSAS bgd. selection expression = annulus(35024.140800, 32525.238800, 576.370017, 1152.740033, X, Y) && !ellipse(36442.931549, 32403.341644, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 23 16:58:21 2012] Writing fullrun_mos1_xmm0091140201_pi300-10000_pass1_cl_src15.gif
[Wed May 23 17:12:52 2012] Mean detx,y = (-6553.77, -11361.03) 
[Wed May 23 17:12:54 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 23 17:13:08 2012] Binned source spectrum to 10 counts/bin
[Wed May 23 17:13:08 2012] Setting source spectrum file to fullrun_mos1_xmm0091140201_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Wed May 23 17:13:08 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0091140201_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Wed May 23 17:58:51 2012] Not generating rmf since there are only 48 counts
[Wed May 23 17:58:51 2012] rmf not generated due to insufficient counts
[Wed May 23 18:51:17 2012] Updating aperture counts using extracted products
[Wed May 23 18:51:17 2012] Error reading totcts from fullrun_mos1_xmm0091140201_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Wed May 23 18:51:18 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 23 18:51:18 2012] Using photon index=1.80, rate=0.0015, arf fullrun_mos1_xmm0091140201_pi300-10000_pass1_cl_src15.arf
[Wed May 23 18:51:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 23 18:51:19 2012] Updating source flux to 3.9e-14
[Wed May 23 18:51:24 2012] Source 15 has fewer than 100.000000 counts, skipping spectral fitting