[Mon Jun 25 23:22:52 2012] Detection parameters:
  Position = (212.3, 402.8) = 0 43 50.12 0 57 50.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 365.0 +/- 22.8
  Background counts = 6.0
  Rate = 0.02 +/- 0.001

[Mon Jun 25 23:22:52 2012] Off-axis axis estimate = 9.81'
[Tue Jun 26 00:30:07 2012] Using EEF radius (= 11.33 ")to estimate initial spatial extent for simple fitting
[Tue Jun 26 00:30:07 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 26 00:30:07 2012] Initial guess for spatial extent in simple fitting = 11.33"
[Tue Jun 26 00:30:07 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.933
[Tue Jun 26 00:30:07 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.33"
[Tue Jun 26 01:03:12 2012] fullrun_mos1_xmm0090070201_pi300-10000_cl_pass0_src3.ximg exists
[Tue Jun 26 01:03:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0090070201_pi300-10000_cl_pass0_src3.csv
[Tue Jun 26 01:03:12 2012] fullrun_mos1_xmm0090070201_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Jun 26 01:03:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0090070201_pi300-10000_cl_pass0_src3.csv
[Tue Jun 26 01:03:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0090070201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0090070201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 01:03:12 2012] fullrun_mos1_xmm0090070201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Jun 26 01:03:12 2012] fullrun_mos1_xmm0090070201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Jun 26 01:03:12 2012] Fit fullrun_mos1_xmm0090070201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Jun 26 01:48:45 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 14.644550 pixels away
[Tue Jun 26 01:48:45 2012] Source 4 is offset by -9.149262 and -2.684189 pixels which is larger than
2 X fitted extent = 8.486161 x 1.060768, not incorporating fit results
[Tue Jun 26 01:48:45 2012] Vigneting correction estimate = 1.000000
[Tue Jun 26 01:48:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 26 01:48:45 2012] Assessing source extent using major
[Tue Jun 26 01:48:45 2012] Source does appear to be extended
[Tue Jun 26 01:48:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 26 01:48:45 2012] Source is confused with source 9
[Tue Jun 26 02:54:57 2012] Using EEF radius (= 11.33 ")to estimate initial spatial extent for simple fitting
[Tue Jun 26 02:54:57 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 26 02:54:57 2012] Initial guess for spatial extent in simple fitting = 11.33"
[Tue Jun 26 02:54:57 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.933
[Tue Jun 26 02:54:57 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 11.33"
[Tue Jun 26 03:23:37 2012] fullrun_mos1_xmm0090070201_pi300-10000_cl_pass1_src3.ximg exists
[Tue Jun 26 03:23:37 2012] fullrun_mos1_xmm0090070201_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Jun 26 03:23:37 2012] Fit fullrun_mos1_xmm0090070201_pi300-10000_cl_pass1_src3 appears to have run properly
[Tue Jun 26 03:23:37 2012] fullrun_mos1_xmm0090070201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Jun 26 03:23:37 2012] fullrun_mos1_xmm0090070201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Jun 26 03:23:37 2012] Fit fullrun_mos1_xmm0090070201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Jun 26 03:57:00 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 14.644550 pixels away
[Tue Jun 26 03:57:00 2012] Spatial fit model total counts = 371.965000, observed total counts = 372.000000
[Tue Jun 26 03:57:00 2012] Offset between fit and detection position for source 4 = 0.280655 pixels
[Tue Jun 26 03:57:00 2012] Warning, changing simple spatial fit ID from 3 to 21
[Tue Jun 26 03:57:00 2012] 373.487000 total counts/ 155.309000 bgd. counts: snr = 17.507037
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.280655 pixels
  Position = (212.2, 402.6) = 0 43 50.17 0 57 49.2
  Extent = 5.3 (4.6-6.0)", rotation angle = 0
  Source counts = 218.2 +/- 19.3
  Background counts = 155.3
  Rate = 0.01 +/- 0.0009
[Tue Jun 26 03:57:00 2012] Vigneting correction estimate = 1.000000
[Tue Jun 26 03:57:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 26 03:57:00 2012] Assessing source extent using major axis lower bound
[Tue Jun 26 03:57:00 2012] Source does appear to be extended
[Tue Jun 26 03:57:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 26 05:01:45 2012] XMMSAS src. selection expression = ellipse(18409.765600, 34976.040000, 315.307809, 315.307809, 0.000000, X, Y)
[Tue Jun 26 05:01:45 2012] Writing source region out to fullrun_mos1_xmm0090070201_pi300-10000_pass1_cl_src4_src.reg
[Tue Jun 26 05:01:45 2012] Extracting stamp from image fullrun_mos1_xmm0090070201_pi300-10000_cl_sm2.00.img.gz, (194, 384) - (230, 421)
[Tue Jun 26 05:01:45 2012] XMMSAS bgd. selection expression = annulus(18409.765600, 34976.040000, 525.513015, 1051.026030, X, Y) && !ellipse(18508.344055, 34398.274902, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 26 05:01:45 2012] Writing fullrun_mos1_xmm0090070201_pi300-10000_pass1_cl_src4.gif
[Tue Jun 26 05:02:49 2012] Mean detx,y = (4367.00, -11620.62) 
[Tue Jun 26 05:02:50 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 26 05:02:57 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 26 05:02:57 2012] Setting source spectrum file to fullrun_mos1_xmm0090070201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Jun 26 05:02:57 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0090070201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Tue Jun 26 05:47:13 2012] Updating aperture counts using extracted products
[Tue Jun 26 05:47:13 2012] Error reading totcts from fullrun_mos1_xmm0090070201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Jun 26 05:47:14 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 26 05:47:14 2012] Using photon index=1.80, rate=0.0106, arf fullrun_mos1_xmm0090070201_pi300-10000_pass1_cl_src4.arf
[Tue Jun 26 05:47:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 26 05:47:14 2012] Updating source flux to 3.3e-13
[Tue Jun 26 05:47:15 2012] Flag b found in src. 4 procflags, skipping spectral fitting
[Tue Jun 26 05:47:15 2012] Flag c found in src. 4 procflags, skipping spectral fitting