[Thu Jul  5 06:55:33 2012] Detection parameters:
  Position = (310.1, 319.8) = 5 19 49.37 -45 46 43.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49063.4 +/- 261.3
  Background counts = 84.6
  Rate = 3 +/- 0.02

[Thu Jul  5 06:55:34 2012] Off-axis axis estimate = 1.76'
[Thu Jul  5 06:57:21 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 06:57:21 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Thu Jul  5 06:57:21 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.841
[Thu Jul  5 06:57:21 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.31"
[Thu Jul  5 07:47:58 2012] fullrun_pn_xmm0090050701_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jul  5 07:47:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0090050701_pi300-10000_cl_pass0_src1.csv
[Thu Jul  5 07:47:58 2012] fullrun_pn_xmm0090050701_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jul  5 07:47:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0090050701_pi300-10000_cl_pass0_src1.csv
[Thu Jul  5 07:47:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0090050701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0090050701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 07:47:58 2012] fullrun_pn_xmm0090050701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jul  5 07:47:58 2012] fullrun_pn_xmm0090050701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jul  5 07:47:58 2012] Fit fullrun_pn_xmm0090050701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jul  5 08:06:04 2012] Spatial fit model total counts = 28540.300000, observed total counts = 28091.000000
[Thu Jul  5 08:06:04 2012] Offset between fit and detection position for source 1 = 0.253353 pixels
[Thu Jul  5 08:06:04 2012] 28592.530000 total counts/ 6016.830000 bgd. counts: snr = 291.043132
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.253353 pixels
  Position = (309.9, 319.6) = 5 19 49.44 -45 46 44.2
  Extent = 6.0 (6.0-6.0)", rotation angle = 0
  Source counts = 22575.7 +/- 169.1
  Background counts = 6016.8
  Rate = 2 +/- 0.02
[Thu Jul  5 08:06:04 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 08:06:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 08:06:04 2012] Assessing source extent using major axis lower bound
[Thu Jul  5 08:06:04 2012] Source does appear to be extended
[Thu Jul  5 08:06:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 08:06:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul  5 08:06:12 2012] Initial guess for spatial extent in simple fitting = 6.00"
[Thu Jul  5 08:06:12 2012] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.850
[Thu Jul  5 08:06:12 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.00"
[Thu Jul  5 08:49:51 2012] fullrun_pn_xmm0090050701_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jul  5 08:49:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0090050701_pi300-10000_cl_pass1_src1.csv
[Thu Jul  5 08:49:51 2012] fullrun_pn_xmm0090050701_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jul  5 08:49:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0090050701_pi300-10000_cl_pass1_src1.csv
[Thu Jul  5 08:49:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0090050701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0090050701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 08:49:51 2012] fullrun_pn_xmm0090050701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jul  5 08:49:51 2012] fullrun_pn_xmm0090050701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jul  5 08:49:51 2012] Fit fullrun_pn_xmm0090050701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jul  5 08:59:23 2012] Spatial fit model total counts = 28511.300000, observed total counts = 28091.000000
[Thu Jul  5 08:59:23 2012] Offset between fit and detection position for source 1 = 0.000727 pixels
[Thu Jul  5 08:59:23 2012] 28560.240000 total counts/ 5977.740000 bgd. counts: snr = 292.081135
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000727 pixels
  Position = (309.9, 319.6) = 5 19 49.44 -45 46 44.2
  Extent = 6.0 (6.0-6.0)", rotation angle = 0
  Source counts = 22582.5 +/- 169.0
  Background counts = 5977.7
  Rate = 2 +/- 0.02
[Thu Jul  5 08:59:23 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 08:59:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 08:59:23 2012] Assessing source extent using major axis lower bound
[Thu Jul  5 08:59:23 2012] Source does appear to be extended
[Thu Jul  5 08:59:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 08:59:30 2012] Counts = 22582.500000, rescaling region sizes by 3.000000
[Thu Jul  5 08:59:30 2012] XMMSAS src. selection expression = ellipse(26916.200940, 27754.989200, 1079.697631, 1079.697631, 0.000000, X, Y)
[Thu Jul  5 08:59:30 2012] Writing source region out to fullrun_pn_xmm0090050701_pi300-10000_pass1_cl_src1_src.reg
[Thu Jul  5 08:59:30 2012] Extracting stamp from image fullrun_pn_xmm0090050701_pi300-10000_cl_sm2.00.img.gz, (248, 258) - (372, 382)
[Thu Jul  5 08:59:31 2012] XMMSAS bgd. selection expression = annulus(26916.200940, 27754.989200, 5398.488155, 10796.976311, X, Y) && !ellipse(31856.700317, 28676.957581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37242.132538, 34998.356659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25012.464905, 30031.657074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27299.483246, 29579.032990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19811.705902, 19827.448898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36705.944061, 19878.438736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19828.285233, 31583.407532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27124.962860, 29037.789337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30818.267914, 28384.660095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29079.011322, 28205.944763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23637.425232, 27030.698700, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25461.459564, 26514.765442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28066.053925, 26252.955658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27041.175446, 26151.480438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27199.473000, 24880.418000, 898.240026, 898.240026, 0.000000, X, Y) && !ellipse(27245.426200, 24547.678000, 721.704021, 721.704021, 0.000000, X, Y) && !ellipse(27360.062720, 23015.389600, 921.368027, 921.368027, 0.000000, X, Y) && !ellipse(27376.552400, 22233.774200, 928.688027, 928.688027, 0.000000, X, Y) && !ellipse(27509.027110, 21159.471076, 1356.968039, 479.979525, 85.370320, X, Y) && !ellipse(27553.199200, 20475.204000, 1356.968039, 395.681611, 78.405000, X, Y) && !ellipse(27578.784000, 20380.722000, 912.088026, 912.088026, 0.000000, X, Y) && !ellipse(27693.447085, 19078.754900, 1089.336031, 336.553294, 82.586834, X, Y) && !ellipse(27781.785220, 18361.740600, 544.668816, 544.668816, 0.000000, X, Y) && !ellipse(27788.660560, 18089.846000, 1089.336031, 369.080811, 86.807290, X, Y) && !ellipse(27889.828400, 17458.962600, 822.648024, 822.648024, 0.000000, X, Y) && !ellipse(27921.061200, 16388.111400, 1083.400031, 1083.400031, 0.000000, X, Y) && !ellipse(27967.125400, 16125.610000, 1082.184031, 1082.184031, 0.000000, X, Y) && !ellipse(27986.132600, 15702.153000, 1868.720054, 543.324016, 78.483300, X, Y)
[Thu Jul  5 08:59:31 2012] Writing fullrun_pn_xmm0090050701_pi300-10000_pass1_cl_src1.gif
[Thu Jul  5 08:59:39 2012] Mean detx,y = (105.72, -256.76) 
[Thu Jul  5 08:59:42 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul  5 09:01:49 2012] Binned source spectrum to 10 counts/bin
[Thu Jul  5 09:01:49 2012] Setting source spectrum file to fullrun_pn_xmm0090050701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jul  5 09:01:49 2012] Setting bgd. spectrum file to fullrun_pn_xmm0090050701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jul  5 10:28:53 2012] Updating aperture counts using extracted products
[Thu Jul  5 10:28:53 2012] Error reading totcts from fullrun_pn_xmm0090050701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jul  5 10:28:53 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul  5 10:28:53 2012] Using photon index=1.80, rate=2.47, arf fullrun_pn_xmm0090050701_pi300-10000_pass1_cl_src1.arf
[Thu Jul  5 10:28:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul  5 10:28:53 2012] Updating source flux to 5.6e-12
[Thu Jul  5 10:30:06 2012] Reading fit data from xmm0090050701/analysis//spectral/fullrun_pn_xmm0090050701_pi300-10000_pass1_cl_src1_pl.csv
[Thu Jul  5 10:30:06 2012] Spectral fit parameter nH value = 3.94328e+20
[Thu Jul  5 10:30:06 2012] Spectral fit parameter PhoIndex value = 1.80314
[Thu Jul  5 10:30:06 2012] Failed to get F(0.3-8.0) from xmm0090050701/analysis//spectral/fullrun_pn_xmm0090050701_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Jul  5 10:30:06 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul  5 10:30:06 2012] Using Nh = 3.9e+20, photon index=1.80, rate=2.47, arf fullrun_pn_xmm0090050701_pi300-10000_pass1_cl_src1.arf
[Thu Jul  5 10:30:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul  5 10:30:06 2012] Updating source flux to 6.2e-12