[Thu Jul  5 06:56:01 2012] Detection parameters:
  Position = (310.1, 319.7) = 5 19 49.37 -45 46 44.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 21657.0 +/- 174.8
  Background counts = 35.4
  Rate = 1 +/- 0.01

[Thu Jul  5 06:56:01 2012] Off-axis axis estimate = 1.76'
[Thu Jul  5 07:57:27 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 07:57:27 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Thu Jul  5 07:57:27 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.842
[Thu Jul  5 07:57:27 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.31"
[Thu Jul  5 08:05:58 2012] fullrun_mos2_xmm0090050701_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jul  5 08:05:58 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0090050701_pi300-10000_cl_pass0_src1.csv
[Thu Jul  5 08:05:58 2012] fullrun_mos2_xmm0090050701_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jul  5 08:05:58 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0090050701_pi300-10000_cl_pass0_src1.csv
[Thu Jul  5 08:05:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0090050701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0090050701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 08:05:58 2012] fullrun_mos2_xmm0090050701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jul  5 08:05:58 2012] fullrun_mos2_xmm0090050701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jul  5 08:05:58 2012] Fit fullrun_mos2_xmm0090050701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jul  5 08:06:06 2012] Spatial fit model total counts = 18103.200000, observed total counts = 17172.000000
[Thu Jul  5 08:06:06 2012] Offset between fit and detection position for source 1 = 0.280203 pixels
[Thu Jul  5 08:06:06 2012] 18255.150000 total counts/ 5157.250000 bgd. counts: snr = 182.386453
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.280203 pixels
  Position = (309.9, 319.5) = 5 19 49.45 -45 46 44.6
  Extent = 5.2 (5.1-5.2)", rotation angle = 0
  Source counts = 13097.9 +/- 135.1
  Background counts = 5157.2
  Rate = 0.8 +/- 0.008
[Thu Jul  5 08:06:06 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 08:06:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 08:06:06 2012] Assessing source extent using major axis lower bound
[Thu Jul  5 08:06:06 2012] Source does appear to be extended
[Thu Jul  5 08:06:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 08:55:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul  5 08:55:51 2012] Initial guess for spatial extent in simple fitting = 5.15"
[Thu Jul  5 08:55:51 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.058
[Thu Jul  5 08:55:51 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.15"
[Thu Jul  5 08:59:19 2012] fullrun_mos2_xmm0090050701_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jul  5 08:59:19 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0090050701_pi300-10000_cl_pass1_src1.csv
[Thu Jul  5 08:59:19 2012] fullrun_mos2_xmm0090050701_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jul  5 08:59:19 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0090050701_pi300-10000_cl_pass1_src1.csv
[Thu Jul  5 08:59:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0090050701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0090050701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 08:59:19 2012] fullrun_mos2_xmm0090050701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jul  5 08:59:19 2012] fullrun_mos2_xmm0090050701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jul  5 08:59:19 2012] Fit fullrun_mos2_xmm0090050701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jul  5 08:59:25 2012] Spatial fit model total counts = 18117.700000, observed total counts = 17172.000000
[Thu Jul  5 08:59:25 2012] Offset between fit and detection position for source 1 = 0.000055 pixels
[Thu Jul  5 08:59:25 2012] 18270.580000 total counts/ 5172.380000 bgd. counts: snr = 182.123675
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000055 pixels
  Position = (309.9, 319.5) = 5 19 49.45 -45 46 44.6
  Extent = 5.1 (5.1-5.2)", rotation angle = 0
  Source counts = 13098.2 +/- 135.2
  Background counts = 5172.4
  Rate = 0.8 +/- 0.008
[Thu Jul  5 08:59:25 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 08:59:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 08:59:25 2012] Assessing source extent using major axis lower bound
[Thu Jul  5 08:59:25 2012] Source does appear to be extended
[Thu Jul  5 08:59:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 10:21:05 2012] Counts = 13098.200000, rescaling region sizes by 3.000000
[Thu Jul  5 10:21:05 2012] XMMSAS src. selection expression = ellipse(26912.967740, 27746.657200, 925.779627, 925.779627, 0.000000, X, Y)
[Thu Jul  5 10:21:05 2012] Writing source region out to fullrun_mos2_xmm0090050701_pi300-10000_pass1_cl_src1_src.reg
[Thu Jul  5 10:21:05 2012] Extracting stamp from image fullrun_mos2_xmm0090050701_pi300-10000_cl_sm2.00.img.gz, (257, 266) - (363, 373)
[Thu Jul  5 10:21:05 2012] XMMSAS bgd. selection expression = annulus(26912.967740, 27746.657200, 4628.898133, 9257.796266, X, Y)
[Thu Jul  5 10:21:05 2012] Writing fullrun_mos2_xmm0090050701_pi300-10000_pass1_cl_src1.gif
[Thu Jul  5 10:21:10 2012] Mean detx,y = (56.60, 113.55) 
[Thu Jul  5 10:21:11 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul  5 10:23:45 2012] Binned source spectrum to 10 counts/bin
[Thu Jul  5 10:23:45 2012] Setting source spectrum file to fullrun_mos2_xmm0090050701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jul  5 10:23:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0090050701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jul  5 10:28:54 2012] Updating aperture counts using extracted products
[Thu Jul  5 10:28:54 2012] Error reading totcts from fullrun_mos2_xmm0090050701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jul  5 10:28:54 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul  5 10:28:54 2012] Using photon index=1.80, rate=0.752, arf fullrun_mos2_xmm0090050701_pi300-10000_pass1_cl_src1.arf
[Thu Jul  5 10:28:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul  5 10:28:54 2012] Updating source flux to 7.5e-12
[Thu Jul  5 10:29:25 2012] Reading fit data from xmm0090050701/analysis//spectral/fullrun_mos2_xmm0090050701_pi300-10000_pass1_cl_src1_pl.csv
[Thu Jul  5 10:29:25 2012] Spectral fit parameter nH value = 4.50885e+20
[Thu Jul  5 10:29:25 2012] Spectral fit parameter PhoIndex value = 1.81986
[Thu Jul  5 10:29:25 2012] Failed to get F(0.3-8.0) from xmm0090050701/analysis//spectral/fullrun_mos2_xmm0090050701_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Jul  5 10:29:25 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul  5 10:29:25 2012] Using Nh = 4.5e+20, photon index=1.82, rate=0.752, arf fullrun_mos2_xmm0090050701_pi300-10000_pass1_cl_src1.arf
[Thu Jul  5 10:29:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul  5 10:29:25 2012] Updating source flux to 7.8e-12