[Sat Jun 23 10:16:45 2012] Detection parameters:
  Position = (218.2, 363.8) = 22 24 18.38 -2 2 26.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 83.2 +/- 12.0
  Background counts = 4.6
  Rate = 0.004 +/- 0.0005

[Sat Jun 23 10:16:47 2012] Off-axis axis estimate = 7.50'
[Sat Jun 23 11:33:46 2012] Using EEF radius (= 10.18 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 11:33:46 2012] Initial guess for spatial extent in simple fitting = 10.18"
[Sat Jun 23 11:33:46 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.116
[Sat Jun 23 11:33:46 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 10.18"
[Sat Jun 23 12:15:51 2012] fullrun_mos2_xmm0090050601_pi300-10000_cl_pass0_src5.ximg exists
[Sat Jun 23 12:15:51 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0090050601_pi300-10000_cl_pass0_src5.csv
[Sat Jun 23 12:15:51 2012] fullrun_mos2_xmm0090050601_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Jun 23 12:15:51 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0090050601_pi300-10000_cl_pass0_src5.csv
[Sat Jun 23 12:15:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0090050601_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0090050601_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 12:15:51 2012] fullrun_mos2_xmm0090050601_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Jun 23 12:15:51 2012] fullrun_mos2_xmm0090050601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Jun 23 12:15:51 2012] Fit fullrun_mos2_xmm0090050601_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Jun 23 12:16:02 2012] Spatial fit model total counts = 119.538000, observed total counts = 119.000000
[Sat Jun 23 12:16:02 2012] Offset between fit and detection position for source 4 = 0.234566 pixels
[Sat Jun 23 12:16:02 2012] 119.190600 total counts/ 57.156000 bgd. counts: snr = 8.205463
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.234566 pixels
  Position = (218.1, 363.7) = 22 24 18.43 -2 2 27.6
  Extent = 7.0 (5.7-9.2)", rotation angle = 0
  Source counts = 62.0 +/- 10.9
  Background counts = 57.2
  Rate = 0.003 +/- 0.0005
[Sat Jun 23 12:16:02 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 12:16:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 12:16:02 2012] Assessing source extent using major axis lower bound
[Sat Jun 23 12:16:02 2012] Source does appear to be extended
[Sat Jun 23 12:16:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 13:10:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 23 13:10:58 2012] Initial guess for spatial extent in simple fitting = 7.01"
[Sat Jun 23 13:10:58 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.897
[Sat Jun 23 13:10:58 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 7.01"
[Sat Jun 23 13:46:29 2012] fullrun_mos2_xmm0090050601_pi300-10000_cl_pass1_src5.ximg exists
[Sat Jun 23 13:46:29 2012] fullrun_mos2_xmm0090050601_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Jun 23 13:46:29 2012] Fit fullrun_mos2_xmm0090050601_pi300-10000_cl_pass1_src5 appears to have run properly
[Sat Jun 23 13:46:30 2012] fullrun_mos2_xmm0090050601_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Jun 23 13:46:30 2012] fullrun_mos2_xmm0090050601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Jun 23 13:46:30 2012] Fit fullrun_mos2_xmm0090050601_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sat Jun 23 13:46:39 2012] Warning, spatial fit 5 centroid is now closest to src. 19
[Sat Jun 23 13:46:39 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 13:46:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 13:46:39 2012] Assessing source extent using major axis lower bound
[Sat Jun 23 13:46:39 2012] Source does appear to be extended
[Sat Jun 23 13:46:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 15:07:43 2012] XMMSAS src. selection expression = ellipse(18921.895480, 31591.100000, 420.651012, 420.651012, 0.000000, X, Y)
[Sat Jun 23 15:07:43 2012] Writing source region out to fullrun_mos2_xmm0090050601_pi300-10000_pass1_cl_src4_src.reg
[Sat Jun 23 15:07:43 2012] Extracting stamp from image fullrun_mos2_xmm0090050601_pi300-10000_cl_sm2.00.img.gz, (194, 339) - (242, 388)
[Sat Jun 23 15:07:43 2012] XMMSAS bgd. selection expression = annulus(18921.895480, 31591.100000, 701.085020, 1402.170040, X, Y)
[Sat Jun 23 15:07:43 2012] Writing fullrun_mos2_xmm0090050601_pi300-10000_pass1_cl_src4.gif
[Sat Jun 23 15:08:37 2012] Mean detx,y = (9747.62, 1154.12) 
[Sat Jun 23 15:08:38 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 23 15:08:45 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 23 15:08:45 2012] Setting source spectrum file to fullrun_mos2_xmm0090050601_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Jun 23 15:08:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0090050601_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sat Jun 23 15:17:15 2012] Not generating rmf since there are only 62 counts
[Sat Jun 23 15:17:15 2012] rmf not generated due to insufficient counts
[Sat Jun 23 15:27:06 2012] Updating aperture counts using extracted products
[Sat Jun 23 15:27:06 2012] Error reading totcts from fullrun_mos2_xmm0090050601_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Jun 23 15:27:06 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 23 15:27:06 2012] Using photon index=1.80, rate=0.00273, arf fullrun_mos2_xmm0090050601_pi300-10000_pass1_cl_src4.arf
[Sat Jun 23 15:27:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 23 15:27:06 2012] Updating source flux to 5.8e-14
[Sat Jun 23 15:27:08 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting