[Sat Jun 23 10:16:46 2012] Detection parameters:
  Position = (418.1, 226.9) = 22 23 20.38 -2 12 22.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 32.7 +/- 7.6
  Background counts = 5.7
  Rate = 0.003 +/- 0.0006

[Sat Jun 23 10:16:47 2012] Off-axis axis estimate = 10.10'
[Sat Jun 23 11:33:46 2012] Using EEF radius (= 11.48 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 11:33:46 2012] Initial guess for spatial extent in simple fitting = 11.48"
[Sat Jun 23 11:33:46 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.913
[Sat Jun 23 11:33:46 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 11.48"
[Sat Jun 23 12:15:51 2012] fullrun_mos2_xmm0090050601_pi300-10000_cl_pass0_src10.ximg exists
[Sat Jun 23 12:15:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0090050601_pi300-10000_cl_pass0_src10.csv
[Sat Jun 23 12:15:51 2012] fullrun_mos2_xmm0090050601_pi300-10000_cl_pass0_src10_1.ximg exists
[Sat Jun 23 12:15:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0090050601_pi300-10000_cl_pass0_src10.csv
[Sat Jun 23 12:15:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0090050601_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0090050601_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 12:15:51 2012] fullrun_mos2_xmm0090050601_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sat Jun 23 12:15:51 2012] fullrun_mos2_xmm0090050601_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sat Jun 23 12:15:51 2012] Fit fullrun_mos2_xmm0090050601_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Sat Jun 23 12:16:02 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 14.424347 pixels away
[Sat Jun 23 12:16:02 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 12:16:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 12:16:02 2012] Assessing source extent using major
[Sat Jun 23 12:16:02 2012] Source does appear to be extended
[Sat Jun 23 12:16:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 13:10:58 2012] Using EEF radius (= 11.48 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 13:10:58 2012] Initial guess for spatial extent in simple fitting = 11.48"
[Sat Jun 23 13:10:58 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.913
[Sat Jun 23 13:10:58 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 11.48"
[Sat Jun 23 13:46:29 2012] fullrun_mos2_xmm0090050601_pi300-10000_cl_pass1_src10.ximg exists
[Sat Jun 23 13:46:29 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0090050601_pi300-10000_cl_pass1_src10.csv
[Sat Jun 23 13:46:29 2012] fullrun_mos2_xmm0090050601_pi300-10000_cl_pass1_src10_1.ximg exists
[Sat Jun 23 13:46:29 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0090050601_pi300-10000_cl_pass1_src10.csv
[Sat Jun 23 13:46:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0090050601_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0090050601_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 13:46:30 2012] fullrun_mos2_xmm0090050601_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sat Jun 23 13:46:30 2012] fullrun_mos2_xmm0090050601_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sat Jun 23 13:46:30 2012] Fit fullrun_mos2_xmm0090050601_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Sat Jun 23 13:46:39 2012] Source 23 is offset by 0.704033 and -8.328440 pixels which is larger than
2 X fitted extent = 1.319641 x 1.319641, not incorporating fit results
[Sat Jun 23 13:46:39 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 13:46:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 13:46:39 2012] Assessing source extent using major
[Sat Jun 23 13:46:39 2012] Source does appear to be extended
[Sat Jun 23 13:46:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 15:07:43 2012] XMMSAS src. selection expression = ellipse(36322.048065, 19691.885757, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 23 15:07:43 2012] Writing source region out to fullrun_mos2_xmm0090050601_pi300-10000_pass1_cl_src23_src.reg
[Sat Jun 23 15:07:43 2012] Extracting stamp from image fullrun_mos2_xmm0090050601_pi300-10000_cl_sm2.00.img.gz, (381, 189) - (456, 264)
[Sat Jun 23 15:07:43 2012] XMMSAS bgd. selection expression = annulus(36322.048065, 19691.885757, 1087.500000, 2175.000000, X, Y) && !ellipse(38141.686000, 18559.007200, 1375.056040, 520.445615, 352.248567, X, Y)
[Sat Jun 23 15:07:43 2012] Writing fullrun_mos2_xmm0090050601_pi300-10000_pass1_cl_src23.gif
[Sat Jun 23 15:09:45 2012] Mean detx,y = (-10733.10, -3700.43) 
[Sat Jun 23 15:09:46 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 23 15:09:54 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 23 15:09:54 2012] Setting source spectrum file to fullrun_mos2_xmm0090050601_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sat Jun 23 15:09:54 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0090050601_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Sat Jun 23 15:21:14 2012] Not generating rmf since there are only 32 counts
[Sat Jun 23 15:21:14 2012] rmf not generated due to insufficient counts
[Sat Jun 23 15:27:06 2012] Updating aperture counts using extracted products
[Sat Jun 23 15:27:06 2012] Error reading totcts from fullrun_mos2_xmm0090050601_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sat Jun 23 15:27:06 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 23 15:27:06 2012] Using photon index=1.80, rate=0.00252, arf fullrun_mos2_xmm0090050601_pi300-10000_pass1_cl_src23.arf
[Sat Jun 23 15:27:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 23 15:27:06 2012] Updating source flux to 4.2e-14
[Sat Jun 23 15:27:08 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting