[Sat Jun 23 10:16:45 2012] Detection parameters:
  Position = (464.8, 354.0) = 22 23 6.82 -2 3 8.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 133.4 +/- 14.4
  Background counts = 5.2
  Rate = 0.006 +/- 0.0006

[Sat Jun 23 10:16:47 2012] Off-axis axis estimate = 12.72'
[Sat Jun 23 11:33:46 2012] Using EEF radius (= 12.79 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 11:33:46 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 23 11:33:46 2012] Initial guess for spatial extent in simple fitting = 12.79"
[Sat Jun 23 11:33:46 2012] source mask rpix=2.9, npix_max = 47, mask sum = 42, frac = 0.888
[Sat Jun 23 11:33:46 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 12.79"
[Sat Jun 23 12:15:51 2012] fullrun_mos2_xmm0090050601_pi300-10000_cl_pass0_src3.ximg exists
[Sat Jun 23 12:15:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0090050601_pi300-10000_cl_pass0_src3.csv
[Sat Jun 23 12:15:51 2012] fullrun_mos2_xmm0090050601_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Jun 23 12:15:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0090050601_pi300-10000_cl_pass0_src3.csv
[Sat Jun 23 12:15:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0090050601_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0090050601_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 12:15:51 2012] fullrun_mos2_xmm0090050601_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Jun 23 12:15:51 2012] fullrun_mos2_xmm0090050601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Jun 23 12:15:51 2012] Fit fullrun_mos2_xmm0090050601_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Jun 23 12:16:02 2012] Spatial fit model total counts = 160.988000, observed total counts = 161.000000
[Sat Jun 23 12:16:02 2012] Offset between fit and detection position for source 2 = 0.218415 pixels
[Sat Jun 23 12:16:02 2012] 163.741200 total counts/ 72.800900 bgd. counts: snr = 10.658302
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.218415 pixels
  Position = (464.6, 354.1) = 22 23 6.89 -2 3 9.3
  Extent = 5.6 (4.5-7.2)", rotation angle = 0
  Source counts = 90.9 +/- 12.8
  Background counts = 72.8
  Rate = 0.004 +/- 0.0006
[Sat Jun 23 12:16:02 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 12:16:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 12:16:02 2012] Assessing source extent using major axis lower bound
[Sat Jun 23 12:16:02 2012] Source does appear to be extended
[Sat Jun 23 12:16:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 13:10:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 23 13:10:58 2012] Initial guess for spatial extent in simple fitting = 5.57"
[Sat Jun 23 13:10:58 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.947
[Sat Jun 23 13:10:58 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.57"
[Sat Jun 23 13:46:29 2012] fullrun_mos2_xmm0090050601_pi300-10000_cl_pass1_src3.ximg exists
[Sat Jun 23 13:46:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0090050601_pi300-10000_cl_pass1_src3.csv
[Sat Jun 23 13:46:29 2012] fullrun_mos2_xmm0090050601_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Jun 23 13:46:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0090050601_pi300-10000_cl_pass1_src3.csv
[Sat Jun 23 13:46:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0090050601_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0090050601_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 13:46:30 2012] fullrun_mos2_xmm0090050601_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Jun 23 13:46:30 2012] fullrun_mos2_xmm0090050601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Jun 23 13:46:30 2012] Fit fullrun_mos2_xmm0090050601_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Jun 23 13:46:39 2012] Spatial fit model total counts = 146.995000, observed total counts = 147.000000
[Sat Jun 23 13:46:39 2012] Offset between fit and detection position for source 2 = 0.049238 pixels
[Sat Jun 23 13:46:39 2012] 147.670100 total counts/ 58.289800 bgd. counts: snr = 11.706997
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.049238 pixels
  Position = (464.6, 354.1) = 22 23 6.89 -2 3 9.0
  Extent = 5.4 (4.4-6.9)", rotation angle = 0
  Source counts = 89.4 +/- 12.2
  Background counts = 58.3
  Rate = 0.004 +/- 0.0005
[Sat Jun 23 13:46:39 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 13:46:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 13:46:39 2012] Assessing source extent using major axis lower bound
[Sat Jun 23 13:46:39 2012] Source does appear to be extended
[Sat Jun 23 13:46:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 15:07:43 2012] XMMSAS src. selection expression = ellipse(40369.566400, 30761.647600, 324.794409, 324.794409, 0.000000, X, Y)
[Sat Jun 23 15:07:43 2012] Writing source region out to fullrun_mos2_xmm0090050601_pi300-10000_pass1_cl_src2_src.reg
[Sat Jun 23 15:07:43 2012] Extracting stamp from image fullrun_mos2_xmm0090050601_pi300-10000_cl_sm2.00.img.gz, (446, 335) - (483, 373)
[Sat Jun 23 15:07:43 2012] XMMSAS bgd. selection expression = annulus(40369.566400, 30761.647600, 541.324016, 1082.648031, X, Y)
[Sat Jun 23 15:07:43 2012] Writing fullrun_mos2_xmm0090050601_pi300-10000_pass1_cl_src2.gif
[Sat Jun 23 15:08:19 2012] Mean detx,y = (-10559.79, 8081.81) 
[Sat Jun 23 15:08:20 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 23 15:08:26 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 23 15:08:26 2012] Setting source spectrum file to fullrun_mos2_xmm0090050601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jun 23 15:08:26 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0090050601_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Jun 23 15:17:07 2012] Not generating rmf since there are only 89 counts
[Sat Jun 23 15:17:07 2012] rmf not generated due to insufficient counts
[Sat Jun 23 15:27:06 2012] Updating aperture counts using extracted products
[Sat Jun 23 15:27:06 2012] Error reading totcts from fullrun_mos2_xmm0090050601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jun 23 15:27:06 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 23 15:27:06 2012] Using photon index=1.80, rate=0.00393, arf fullrun_mos2_xmm0090050601_pi300-10000_pass1_cl_src2.arf
[Sat Jun 23 15:27:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 23 15:27:06 2012] Updating source flux to 1.2e-13
[Sat Jun 23 15:27:08 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting