[Sat Jun 23 10:16:45 2012] Detection parameters:
  Position = (318.0, 311.8) = 22 23 49.41 -2 6 13.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4539.3 +/- 79.7
  Background counts = 7.0
  Rate = 0.2 +/- 0.004

[Sat Jun 23 10:16:47 2012] Off-axis axis estimate = 1.72'
[Sat Jun 23 11:33:46 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 11:33:46 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sat Jun 23 11:33:46 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Sat Jun 23 11:33:46 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Sat Jun 23 12:15:51 2012] fullrun_mos2_xmm0090050601_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun 23 12:15:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0090050601_pi300-10000_cl_pass0_src1.csv
[Sat Jun 23 12:15:51 2012] fullrun_mos2_xmm0090050601_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun 23 12:15:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0090050601_pi300-10000_cl_pass0_src1.csv
[Sat Jun 23 12:15:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0090050601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0090050601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 12:15:51 2012] fullrun_mos2_xmm0090050601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun 23 12:15:51 2012] fullrun_mos2_xmm0090050601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun 23 12:15:51 2012] Fit fullrun_mos2_xmm0090050601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jun 23 12:16:02 2012] Spatial fit model total counts = 4203.100000, observed total counts = 4069.000000
[Sat Jun 23 12:16:02 2012] Offset between fit and detection position for source 1 = 0.237707 pixels
[Sat Jun 23 12:16:02 2012] 4189.890000 total counts/ 1084.670000 bgd. counts: snr = 94.285207
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.237707 pixels
  Position = (317.9, 311.7) = 22 23 49.47 -2 6 13.9
  Extent = 5.3 (5.1-5.4)", rotation angle = 0
  Source counts = 3105.2 +/- 64.7
  Background counts = 1084.7
  Rate = 0.1 +/- 0.003
[Sat Jun 23 12:16:02 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 12:16:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 12:16:02 2012] Assessing source extent using major axis lower bound
[Sat Jun 23 12:16:02 2012] Source does appear to be extended
[Sat Jun 23 12:16:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 13:10:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 23 13:10:58 2012] Initial guess for spatial extent in simple fitting = 5.26"
[Sat Jun 23 13:10:58 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.026
[Sat Jun 23 13:10:58 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.26"
[Sat Jun 23 13:46:29 2012] fullrun_mos2_xmm0090050601_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun 23 13:46:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0090050601_pi300-10000_cl_pass1_src1.csv
[Sat Jun 23 13:46:29 2012] fullrun_mos2_xmm0090050601_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun 23 13:46:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0090050601_pi300-10000_cl_pass1_src1.csv
[Sat Jun 23 13:46:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0090050601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0090050601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 13:46:30 2012] fullrun_mos2_xmm0090050601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun 23 13:46:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0090050601_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Jun 23 13:46:30 2012] fullrun_mos2_xmm0090050601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun 23 13:46:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0090050601_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Jun 23 13:46:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0090050601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0090050601_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 13:46:39 2012] Warning, spatial fit 1 centroid is now closest to src. 7
[Sat Jun 23 13:46:39 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 13:46:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 13:46:39 2012] Assessing source extent using major axis lower bound
[Sat Jun 23 13:46:39 2012] Source does appear to be extended
[Sat Jun 23 13:46:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 15:07:42 2012] Counts = 3105.220000, rescaling region sizes by 2.000000
[Sat Jun 23 15:07:42 2012] XMMSAS src. selection expression = ellipse(27604.742820, 27065.364600, 631.492818, 631.492818, 0.000000, X, Y)
[Sat Jun 23 15:07:42 2012] Writing source region out to fullrun_mos2_xmm0090050601_pi300-10000_pass1_cl_src1_src.reg
[Sat Jun 23 15:07:42 2012] Extracting stamp from image fullrun_mos2_xmm0090050601_pi300-10000_cl_sm2.00.img.gz, (282, 275) - (354, 348)
[Sat Jun 23 15:07:43 2012] XMMSAS bgd. selection expression = annulus(27604.742820, 27065.364600, 2104.976061, 4209.952121, X, Y) && !ellipse(28429.479645, 26154.231049, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 23 15:07:43 2012] Writing fullrun_mos2_xmm0090050601_pi300-10000_pass1_cl_src1.gif
[Sat Jun 23 15:07:47 2012] Mean detx,y = (28.65, 47.05) 
[Sat Jun 23 15:07:48 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 23 15:08:08 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 23 15:08:08 2012] Setting source spectrum file to fullrun_mos2_xmm0090050601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun 23 15:08:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0090050601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jun 23 15:27:06 2012] Updating aperture counts using extracted products
[Sat Jun 23 15:27:06 2012] Error reading totcts from fullrun_mos2_xmm0090050601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun 23 15:27:06 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 23 15:27:06 2012] Using photon index=1.80, rate=0.137, arf fullrun_mos2_xmm0090050601_pi300-10000_pass1_cl_src1.arf
[Sat Jun 23 15:27:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 23 15:27:06 2012] Updating source flux to 1.5e-12
[Sat Jun 23 15:27:42 2012] Reading fit data from xmm0090050601/analysis//spectral/fullrun_mos2_xmm0090050601_pi300-10000_pass1_cl_src1_pl.csv
[Sat Jun 23 15:27:42 2012] Spectral fit parameter nH value = 428240000000.0
[Sat Jun 23 15:27:42 2012] Spectral fit parameter PhoIndex value = -0.384804
[Sat Jun 23 15:27:42 2012] Failed to get F(0.3-8.0) from xmm0090050601/analysis//spectral/fullrun_mos2_xmm0090050601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Jun 23 15:27:42 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 23 15:27:42 2012] Using Nh = 4.3e+11, photon index=-0.38, rate=0.137, arf fullrun_mos2_xmm0090050601_pi300-10000_pass1_cl_src1.arf
[Sat Jun 23 15:27:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 23 15:27:42 2012] Updating source flux to 4.5e-12