[Sat Jun 23 10:16:14 2012] Detection parameters:
  Position = (344.2, 397.7) = 22 23 41.82 -1 59 58.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39.0 +/- 8.9
  Background counts = 7.1
  Rate = 0.003 +/- 0.0006

[Sat Jun 23 10:16:15 2012] Off-axis axis estimate = 7.92'
[Sat Jun 23 10:43:59 2012] Using EEF radius (= 10.39 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 10:43:59 2012] Initial guess for spatial extent in simple fitting = 10.39"
[Sat Jun 23 10:43:59 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.079
[Sat Jun 23 10:43:59 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 10.39"
[Sat Jun 23 11:33:45 2012] fullrun_mos1_xmm0090050601_pi300-10000_cl_pass0_src17.ximg exists
[Sat Jun 23 11:33:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0090050601_pi300-10000_cl_pass0_src17.csv
[Sat Jun 23 11:33:45 2012] fullrun_mos1_xmm0090050601_pi300-10000_cl_pass0_src17_1.ximg exists
[Sat Jun 23 11:33:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0090050601_pi300-10000_cl_pass0_src17.csv
[Sat Jun 23 11:33:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0090050601_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0090050601_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 11:33:46 2012] fullrun_mos1_xmm0090050601_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sat Jun 23 11:33:46 2012] fullrun_mos1_xmm0090050601_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sat Jun 23 11:33:46 2012] Fit fullrun_mos1_xmm0090050601_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Sat Jun 23 12:15:58 2012] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 13.269943 pixels away
[Sat Jun 23 12:15:58 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 12:15:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 12:15:58 2012] Assessing source extent using major
[Sat Jun 23 12:15:58 2012] Source does appear to be extended
[Sat Jun 23 12:15:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 12:35:36 2012] Using EEF radius (= 10.39 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 12:35:36 2012] Initial guess for spatial extent in simple fitting = 10.39"
[Sat Jun 23 12:35:36 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.079
[Sat Jun 23 12:35:36 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 10.39"
[Sat Jun 23 13:10:58 2012] fullrun_mos1_xmm0090050601_pi300-10000_cl_pass1_src17.ximg exists
[Sat Jun 23 13:10:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0090050601_pi300-10000_cl_pass1_src17.csv
[Sat Jun 23 13:10:58 2012] fullrun_mos1_xmm0090050601_pi300-10000_cl_pass1_src17_1.ximg exists
[Sat Jun 23 13:10:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0090050601_pi300-10000_cl_pass1_src17.csv
[Sat Jun 23 13:10:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0090050601_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0090050601_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 13:10:58 2012] fullrun_mos1_xmm0090050601_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Sat Jun 23 13:10:58 2012] fullrun_mos1_xmm0090050601_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Sat Jun 23 13:10:58 2012] Fit fullrun_mos1_xmm0090050601_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Sat Jun 23 13:46:35 2012] Spatial fit model total counts = 134.000000, observed total counts = 134.000000
[Sat Jun 23 13:46:35 2012] Offset between fit and detection position for source 10 = 0.378811 pixels
[Sat Jun 23 13:46:35 2012] 135.586500 total counts/ 107.607000 bgd. counts: snr = 2.697241
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.378811 pixels
  Position = (344.2, 397.3) = 22 23 41.82 -2 0 1.3
  Extent = 6.4 (4.6-9.8)", rotation angle = 0
  Source counts = 28.0 +/- 11.6
  Background counts = 107.6
  Rate = 0.001 +/- 0.0005
[Sat Jun 23 13:46:35 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 13:46:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 13:46:35 2012] Assessing source extent using major axis lower bound
[Sat Jun 23 13:46:35 2012] Source does appear to be extended
[Sat Jun 23 13:46:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 14:10:46 2012] XMMSAS src. selection expression = ellipse(29895.595520, 34518.072000, 386.384411, 386.384411, 0.000000, X, Y)
[Sat Jun 23 14:10:46 2012] Writing source region out to fullrun_mos1_xmm0090050601_pi300-10000_pass1_cl_src10_src.reg
[Sat Jun 23 14:10:46 2012] Extracting stamp from image fullrun_mos1_xmm0090050601_pi300-10000_cl_sm2.00.img.gz, (322, 375) - (366, 420)
[Sat Jun 23 14:10:46 2012] XMMSAS bgd. selection expression = annulus(29895.595520, 34518.072000, 643.974019, 1287.948037, X, Y)
[Sat Jun 23 14:10:46 2012] Writing fullrun_mos1_xmm0090050601_pi300-10000_pass1_cl_src10.gif
[Sat Jun 23 14:16:29 2012] Mean detx,y = (8040.69, -693.22) 
[Sat Jun 23 14:16:30 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 23 14:16:38 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 23 14:16:38 2012] Setting source spectrum file to fullrun_mos1_xmm0090050601_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sat Jun 23 14:16:38 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0090050601_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sat Jun 23 15:07:15 2012] Not generating rmf since there are only 27 counts
[Sat Jun 23 15:07:15 2012] rmf not generated due to insufficient counts
[Sat Jun 23 15:27:05 2012] Updating aperture counts using extracted products
[Sat Jun 23 15:27:05 2012] Error reading totcts from fullrun_mos1_xmm0090050601_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sat Jun 23 15:27:06 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 23 15:27:06 2012] Using photon index=1.80, rate=0.00123, arf fullrun_mos1_xmm0090050601_pi300-10000_pass1_cl_src10.arf
[Sat Jun 23 15:27:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 23 15:27:06 2012] Updating source flux to 2e-14
[Sat Jun 23 15:27:07 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun 23 15:27:08 2012] xmm0090050601/analysis//spectral/fullrun_mos1_xmm0090050601_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete