[Sat Jun 23 10:16:14 2012] Detection parameters:
  Position = (318.1, 312.0) = 22 23 49.40 -2 6 13.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4607.6 +/- 80.5
  Background counts = 9.4
  Rate = 0.2 +/- 0.004

[Sat Jun 23 10:16:15 2012] Off-axis axis estimate = 1.73'
[Sat Jun 23 10:43:59 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 10:43:59 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sat Jun 23 10:43:59 2012] source mask rpix=1.7, npix_max = 18, mask sum = 15, frac = 0.792
[Sat Jun 23 10:43:59 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Sat Jun 23 11:33:45 2012] fullrun_mos1_xmm0090050601_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun 23 11:33:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0090050601_pi300-10000_cl_pass0_src1.csv
[Sat Jun 23 11:33:45 2012] fullrun_mos1_xmm0090050601_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun 23 11:33:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0090050601_pi300-10000_cl_pass0_src1.csv
[Sat Jun 23 11:33:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0090050601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0090050601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 11:33:45 2012] fullrun_mos1_xmm0090050601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun 23 11:33:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0090050601_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Jun 23 11:33:45 2012] fullrun_mos1_xmm0090050601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun 23 11:33:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0090050601_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Jun 23 11:33:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0090050601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0090050601_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 12:15:58 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.193783 pixels away
[Sat Jun 23 12:15:58 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 12:15:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 12:15:58 2012] Assessing source extent using major
[Sat Jun 23 12:15:58 2012] Source does appear to be extended
[Sat Jun 23 12:15:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 12:35:36 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 12:35:36 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sat Jun 23 12:35:36 2012] source mask rpix=1.7, npix_max = 18, mask sum = 15, frac = 0.792
[Sat Jun 23 12:35:36 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.29"
[Sat Jun 23 13:10:58 2012] fullrun_mos1_xmm0090050601_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun 23 13:10:58 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0090050601_pi300-10000_cl_pass1_src1.csv
[Sat Jun 23 13:10:58 2012] fullrun_mos1_xmm0090050601_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun 23 13:10:58 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0090050601_pi300-10000_cl_pass1_src1.csv
[Sat Jun 23 13:10:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0090050601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0090050601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 13:10:58 2012] fullrun_mos1_xmm0090050601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun 23 13:10:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0090050601_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Jun 23 13:10:58 2012] fullrun_mos1_xmm0090050601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun 23 13:10:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0090050601_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Jun 23 13:10:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0090050601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0090050601_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 13:46:35 2012] Source 1 is offset by -4.833786 and 3.874405 pixels which is larger than
2 X fitted extent = 0.614736 x 0.614736, not incorporating fit results
[Sat Jun 23 13:46:35 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 111.427657 pixels away
[Sat Jun 23 13:46:35 2012] Source 1 is offset by -4.902844 and 0.518727 pixels which is larger than
2 X fitted extent = 3.771458 x 3.771458, not incorporating fit results
[Sat Jun 23 13:46:35 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 13:46:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 13:46:35 2012] Assessing source extent using major
[Sat Jun 23 13:46:35 2012] Source does appear to be extended
[Sat Jun 23 13:46:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 14:10:46 2012] Counts = 4607.591309, rescaling region sizes by 2.000000
[Sat Jun 23 14:10:46 2012] XMMSAS src. selection expression = ellipse(27624.814606, 27091.719238, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat Jun 23 14:10:46 2012] Writing source region out to fullrun_mos1_xmm0090050601_pi300-10000_pass1_cl_src1_src.reg
[Sat Jun 23 14:10:46 2012] Extracting stamp from image fullrun_mos1_xmm0090050601_pi300-10000_cl_sm2.00.img.gz, (243, 237) - (393, 387)
[Sat Jun 23 14:10:46 2012] XMMSAS bgd. selection expression = annulus(27624.814606, 27091.719238, 4350.000000, 8700.000000, X, Y) && !ellipse(18941.869000, 31602.847920, 427.854695, 427.854695, 0.000000, X, Y) && !ellipse(28650.978119, 26802.047577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34587.487320, 36266.108600, 953.808027, 953.808027, 0.000000, X, Y) && !ellipse(28369.991058, 26072.732269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34406.298720, 35075.641400, 422.693612, 422.693612, 0.000000, X, Y) && !ellipse(29895.595520, 34518.072000, 515.179215, 515.179215, 0.000000, X, Y) && !ellipse(36314.037842, 19685.558823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35629.597200, 36352.519400, 707.966420, 389.403211, 21.379239, X, Y)
[Sat Jun 23 14:10:46 2012] Writing fullrun_mos1_xmm0090050601_pi300-10000_pass1_cl_src1.gif
[Sat Jun 23 14:10:51 2012] Mean detx,y = (263.41, -149.28) 
[Sat Jun 23 14:10:53 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 23 14:12:48 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 23 14:12:48 2012] Setting source spectrum file to fullrun_mos1_xmm0090050601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun 23 14:12:48 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0090050601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jun 23 14:17:35 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 23 14:17:35 2012] rmf not generated due to insufficient counts
[Sat Jun 23 15:27:05 2012] Updating aperture counts using extracted products
[Sat Jun 23 15:27:05 2012] Error reading totcts from fullrun_mos1_xmm0090050601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun 23 15:27:05 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 23 15:27:05 2012] Using photon index=1.80, rate=0.227, arf fullrun_mos1_xmm0090050601_pi300-10000_pass1_cl_src1.arf
[Sat Jun 23 15:27:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 23 15:27:05 2012] Updating source flux to 2.1e-12
[Sat Jun 23 15:27:07 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 23 15:27:08 2012] xmm0090050601/analysis//spectral/fullrun_mos1_xmm0090050601_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete