[Tue Jul 31 22:10:10 2012] Detection parameters: Position = (305.0, 320.1) = 13 8 7.41 -65 18 21.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 66237.8 +/- 306.1 Background counts = 224.0 Rate = 0.7 +/- 0.003 [Tue Jul 31 22:10:13 2012] Off-axis axis estimate = 1.64' [Tue Jul 31 22:17:53 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting [Tue Jul 31 22:17:53 2012] Initial guess for spatial extent in simple fitting = 7.25" [Tue Jul 31 22:17:53 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852 [Tue Jul 31 22:17:53 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25" [Wed Aug 1 00:59:58 2012] fullrun_pn_xmm0090030201_pi300-10000_cl_pass0_src1.ximg exists [Wed Aug 1 00:59:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0090030201_pi300-10000_cl_pass0_src1.csv [Wed Aug 1 00:59:58 2012] fullrun_pn_xmm0090030201_pi300-10000_cl_pass0_src1_1.ximg exists [Wed Aug 1 00:59:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0090030201_pi300-10000_cl_pass0_src1.csv [Wed Aug 1 00:59:58 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0090030201_pi300-10000_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0090030201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Aug 1 00:59:59 2012] fullrun_pn_xmm0090030201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Wed Aug 1 00:59:59 2012] fullrun_pn_xmm0090030201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Wed Aug 1 00:59:59 2012] Fit fullrun_pn_xmm0090030201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly [Wed Aug 1 04:18:31 2012] Spatial fit model total counts = 57071.000000, observed total counts = 56931.000000 [Wed Aug 1 04:18:31 2012] Offset between fit and detection position for source 1 = 0.123369 pixels [Wed Aug 1 04:18:31 2012] 57137.900000 total counts/ 12712.300000 bgd. counts: snr = 394.022693 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.123369 pixels Position = (304.9, 320.2) = 13 8 7.47 -65 18 22.3 Extent = 6.1 (6.1-6.2)", rotation angle = 0 Source counts = 44425.6 +/- 239.0 Background counts = 12712.3 Rate = 0.4 +/- 0.002 [Wed Aug 1 04:18:32 2012] Vigneting correction estimate = 1.000000 [Wed Aug 1 04:18:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Aug 1 04:18:32 2012] Assessing source extent using major axis lower bound [Wed Aug 1 04:18:32 2012] Source does appear to be extended [Wed Aug 1 04:18:32 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Aug 1 04:19:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Wed Aug 1 04:19:03 2012] Initial guess for spatial extent in simple fitting = 6.14" [Wed Aug 1 04:19:03 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.096 [Wed Aug 1 04:19:03 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.14" [Wed Aug 1 06:55:06 2012] fullrun_pn_xmm0090030201_pi300-10000_cl_pass1_src1.ximg exists [Wed Aug 1 06:55:06 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0090030201_pi300-10000_cl_pass1_src1.csv [Wed Aug 1 06:55:06 2012] fullrun_pn_xmm0090030201_pi300-10000_cl_pass1_src1_1.ximg exists [Wed Aug 1 06:55:06 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0090030201_pi300-10000_cl_pass1_src1.csv [Wed Aug 1 06:55:06 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0090030201_pi300-10000_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0090030201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Aug 1 06:55:08 2012] fullrun_pn_xmm0090030201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Wed Aug 1 06:55:08 2012] fullrun_pn_xmm0090030201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Wed Aug 1 06:55:08 2012] Fit fullrun_pn_xmm0090030201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly [Wed Aug 1 09:25:38 2012] Spatial fit model total counts = 57051.500000, observed total counts = 56931.000000 [Wed Aug 1 09:25:38 2012] Offset between fit and detection position for source 1 = 0.000302 pixels [Wed Aug 1 09:25:38 2012] 57119.000000 total counts/ 12702.000000 bgd. counts: snr = 394.106110 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.000302 pixels Position = (304.9, 320.2) = 13 8 7.47 -65 18 22.3 Extent = 6.1 (6.1-6.2)", rotation angle = 0 Source counts = 44417.0 +/- 239.0 Background counts = 12702.0 Rate = 0.4 +/- 0.002 [Wed Aug 1 09:25:38 2012] Vigneting correction estimate = 1.000000 [Wed Aug 1 09:25:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Aug 1 09:25:38 2012] Assessing source extent using major axis lower bound [Wed Aug 1 09:25:38 2012] Source does appear to be extended [Wed Aug 1 09:25:38 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Aug 1 09:26:10 2012] Counts = 44417.000000, rescaling region sizes by 3.000000 [Wed Aug 1 09:26:10 2012] XMMSAS src. selection expression = ellipse(26476.684140, 27807.466200, 1105.426832, 1105.426832, 0.000000, X, Y) [Wed Aug 1 09:26:10 2012] Writing source region out to fullrun_pn_xmm0090030201_pi300-10000_pass1_cl_src1_src.reg [Wed Aug 1 09:26:10 2012] Extracting stamp from image fullrun_pn_xmm0090030201_pi300-10000_cl_sm2.00.img.gz, (241, 257) - (368, 384) [Wed Aug 1 09:26:10 2012] XMMSAS bgd. selection expression = annulus(26476.684140, 27807.466200, 5527.134159, 11054.268318, X, Y) && !ellipse(36410.719220, 34549.929800, 390.126411, 390.126411, 0.000000, X, Y) && !ellipse(26471.876099, 34670.741974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37511.700800, 28654.358000, 401.012812, 401.012812, 0.000000, X, Y) && !ellipse(29582.492000, 24821.664000, 400.494412, 400.494412, 0.000000, X, Y) && !ellipse(17949.248000, 23944.602180, 451.395213, 451.395213, 0.000000, X, Y) && !ellipse(25327.871765, 20473.133438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37923.986542, 31898.230286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23509.630707, 39466.672729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25741.650116, 37401.505981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36812.923157, 37293.929504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28834.233551, 37131.890411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33732.284698, 36695.764679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23286.687897, 36641.803864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32699.600433, 36060.562195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29608.562225, 34811.137268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33492.588654, 32462.482422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36842.470978, 29367.512115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25368.302551, 28805.559235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34988.774400, 24817.007200, 344.081610, 344.081610, 0.000000, X, Y) && !ellipse(37640.960419, 18234.204315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30718.656000, 16717.824000, 1767.000051, 1767.000051, 0.000000, X, Y) && !ellipse(22234.228973, 16285.447327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18368.944397, 16262.057846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27159.144600, 36514.969200, 382.748811, 382.748811, 0.000000, X, Y) && !ellipse(19851.014938, 35283.376709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30585.939240, 32280.285000, 376.476016, 376.476016, 0.000000, X, Y) && !ellipse(15834.056503, 32164.542999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18683.459167, 32039.581390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26878.270813, 29412.246704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25922.186798, 29019.647522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32404.996880, 28783.369000, 416.831212, 416.831212, 0.000000, X, Y) && !ellipse(15445.045593, 28518.473572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24403.958740, 28474.822235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21658.829400, 28119.080200, 317.399209, 317.399209, 0.000000, X, Y) && !ellipse(29254.839600, 27028.083080, 984.504028, 984.504028, 0.000000, X, Y) && !ellipse(26583.777618, 25968.254211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24472.195648, 25161.897919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27489.976288, 25083.927673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26971.791923, 24924.073347, 552.729611, 333.548210, 0.000000, X, Y) && !ellipse(28035.069600, 23874.976600, 495.625614, 495.625614, 0.000000, X, Y) && !ellipse(28388.247040, 22745.446899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29308.642151, 22635.122467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28639.624000, 22370.070000, 1296.600037, 1296.600037, 0.000000, X, Y) && !ellipse(29631.579060, 21803.015800, 491.230414, 491.230414, 0.000000, X, Y) && !ellipse(15930.635849, 21574.098419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18440.540200, 21257.877700, 419.329612, 419.329612, 0.000000, X, Y) && !ellipse(28911.020520, 21548.066200, 1383.088040, 538.476815, 70.034000, X, Y) && !ellipse(29135.444800, 20852.010000, 1459.472042, 1459.472042, 0.000000, X, Y) && !ellipse(29507.784800, 19739.454000, 359.511210, 359.511210, 0.000000, X, Y) && !ellipse(29462.421448, 19259.045624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30161.416937, 18306.888000, 1765.104051, 1765.104051, 0.000000, X, Y) && !ellipse(23090.667084, 16351.850937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30981.392914, 16048.973160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31184.364366, 15461.750200, 1767.976051, 405.328812, 81.419154, X, Y) [Wed Aug 1 09:26:10 2012] Writing fullrun_pn_xmm0090030201_pi300-10000_pass1_cl_src1.gif [Wed Aug 1 09:27:20 2012] Mean detx,y = (148.34, -81.52) [Wed Aug 1 09:27:36 2012] Setting backscal keywords in source and bgd. spectrum [Wed Aug 1 09:31:23 2012] Binned source spectrum to 10 counts/bin [Wed Aug 1 09:31:24 2012] Setting source spectrum file to fullrun_pn_xmm0090030201_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Wed Aug 1 09:31:24 2012] Setting bgd. spectrum file to fullrun_pn_xmm0090030201_pi300-10000_pass1_cl_src1_bgd.pi.gz [Wed Aug 1 15:37:15 2012] Updating aperture counts using extracted products [Wed Aug 1 15:37:15 2012] Error reading totcts from fullrun_pn_xmm0090030201_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Wed Aug 1 15:37:16 2012] Calculating source flux in energy range 0.30-8.00 [Wed Aug 1 15:37:16 2012] Using photon index=1.80, rate=0.445, arf fullrun_pn_xmm0090030201_pi300-10000_pass1_cl_src1.arf [Wed Aug 1 15:37:16 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed Aug 1 15:37:16 2012] Updating source flux to 1.4e-12 [Wed Aug 1 15:44:15 2012] Reading fit data from xmm0090030201/analysis//spectral/fullrun_pn_xmm0090030201_pi300-10000_pass1_cl_src1_pl.csv [Wed Aug 1 15:44:15 2012] Spectral fit parameter nH value = 1.4e+21 [Wed Aug 1 15:44:15 2012] Spectral fit parameter PhoIndex value = 2.88117 [Wed Aug 1 15:44:15 2012] Failed to get F(0.3-8.0) from xmm0090030201/analysis//spectral/fullrun_pn_xmm0090030201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected [Wed Aug 1 15:44:15 2012] Calculating source flux in energy range 0.30-8.00 [Wed Aug 1 15:44:15 2012] Using Nh = 1.4e+21, photon index=2.88, rate=0.445, arf fullrun_pn_xmm0090030201_pi300-10000_pass1_cl_src1.arf [Wed Aug 1 15:44:15 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed Aug 1 15:44:15 2012] Updating source flux to 1e-12