[Tue Jul 31 22:11:32 2012] Detection parameters:
  Position = (371.3, 202.3) = 13 7 21.10 -65 26 56.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71.0 +/- 13.9
  Background counts = 50.1
  Rate = 0.001 +/- 0.0002

[Tue Jul 31 22:11:32 2012] Off-axis axis estimate = 8.75'
[Wed Aug  1 02:53:36 2012] Using EEF radius (= 10.80 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 02:53:36 2012] Initial guess for spatial extent in simple fitting = 10.80"
[Wed Aug  1 02:53:36 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.011
[Wed Aug  1 02:53:36 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 10.80"
[Wed Aug  1 04:18:15 2012] fullrun_mos2_xmm0090030201_pi300-10000_cl_pass0_src29.ximg exists
[Wed Aug  1 04:18:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0090030201_pi300-10000_cl_pass0_src29.csv
[Wed Aug  1 04:18:15 2012] fullrun_mos2_xmm0090030201_pi300-10000_cl_pass0_src29_1.ximg exists
[Wed Aug  1 04:18:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0090030201_pi300-10000_cl_pass0_src29.csv
[Wed Aug  1 04:18:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0090030201_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0090030201_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 04:18:15 2012] fullrun_mos2_xmm0090030201_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Wed Aug  1 04:18:15 2012] fullrun_mos2_xmm0090030201_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Wed Aug  1 04:18:15 2012] Fit fullrun_mos2_xmm0090030201_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Wed Aug  1 04:18:48 2012] Source 52 is offset by 4.417845 and -3.576097 pixels which is larger than
2 X fitted extent = 1.234308 x 1.234308, not incorporating fit results
[Wed Aug  1 04:18:48 2012] Spatial fit model total counts = 546.885000, observed total counts = 547.000000
[Wed Aug  1 04:18:48 2012] Offset between fit and detection position for source 52 = 0.327296 pixels
[Wed Aug  1 04:18:48 2012] 544.579300 total counts/ 507.741000 bgd. counts: snr = 1.634852
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 0.327296 pixels
  Position = (371.2, 202.0) = 13 7 21.18 -65 26 55.9
  Extent = 3.8 (2.7-6.9)", rotation angle = 0
  Source counts = 36.8 +/- 23.3
  Background counts = 507.7
  Rate = 0.0003 +/- 0.0002
  Deleting source due to low Poisson probability