[Tue Jul 31 22:11:30 2012] Detection parameters:
  Position = (305.1, 320.1) = 13 8 7.33 -65 18 22.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 21314.1 +/- 172.7
  Background counts = 65.1
  Rate = 0.2 +/- 0.002

[Tue Jul 31 22:11:32 2012] Off-axis axis estimate = 1.64'
[Wed Aug  1 02:53:36 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 02:53:36 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Wed Aug  1 02:53:36 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Wed Aug  1 02:53:36 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Wed Aug  1 04:18:14 2012] fullrun_mos2_xmm0090030201_pi300-10000_cl_pass0_src1.ximg exists
[Wed Aug  1 04:18:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0090030201_pi300-10000_cl_pass0_src1.csv
[Wed Aug  1 04:18:14 2012] fullrun_mos2_xmm0090030201_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Aug  1 04:18:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0090030201_pi300-10000_cl_pass0_src1.csv
[Wed Aug  1 04:18:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0090030201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0090030201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 04:18:15 2012] fullrun_mos2_xmm0090030201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Aug  1 04:18:15 2012] fullrun_mos2_xmm0090030201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Aug  1 04:18:15 2012] Fit fullrun_mos2_xmm0090030201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Aug  1 04:18:48 2012] Spatial fit model total counts = 20362.300000, observed total counts = 19684.000000
[Wed Aug  1 04:18:48 2012] Offset between fit and detection position for source 1 = 0.203907 pixels
[Wed Aug  1 04:18:48 2012] 20449.880000 total counts/ 5768.380000 bgd. counts: snr = 193.305183
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.203907 pixels
  Position = (304.9, 320.1) = 13 8 7.47 -65 18 22.7
  Extent = 5.5 (5.4-5.5)", rotation angle = 0
  Source counts = 14681.5 +/- 143.0
  Background counts = 5768.4
  Rate = 0.1 +/- 0.001
[Wed Aug  1 04:18:48 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 04:18:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 04:18:48 2012] Assessing source extent using major axis lower bound
[Wed Aug  1 04:18:48 2012] Source does appear to be extended
[Wed Aug  1 04:18:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  1 08:11:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug  1 08:11:49 2012] Initial guess for spatial extent in simple fitting = 5.47"
[Wed Aug  1 08:11:49 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.295
[Wed Aug  1 08:11:49 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.47"
[Wed Aug  1 09:25:21 2012] fullrun_mos2_xmm0090030201_pi300-10000_cl_pass1_src1.ximg exists
[Wed Aug  1 09:25:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0090030201_pi300-10000_cl_pass1_src1.csv
[Wed Aug  1 09:25:21 2012] fullrun_mos2_xmm0090030201_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Aug  1 09:25:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0090030201_pi300-10000_cl_pass1_src1.csv
[Wed Aug  1 09:25:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0090030201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0090030201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 09:25:21 2012] fullrun_mos2_xmm0090030201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Aug  1 09:25:21 2012] fullrun_mos2_xmm0090030201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Aug  1 09:25:21 2012] Fit fullrun_mos2_xmm0090030201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Aug  1 09:25:54 2012] Spatial fit model total counts = 20298.600000, observed total counts = 19687.000000
[Wed Aug  1 09:25:54 2012] Offset between fit and detection position for source 1 = 0.011754 pixels
[Wed Aug  1 09:25:54 2012] 20474.350000 total counts/ 5965.750000 bgd. counts: snr = 187.842121
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.011754 pixels
  Position = (304.9, 320.1) = 13 8 7.48 -65 18 22.7
  Extent = 5.4 (5.3-5.5)", rotation angle = 0
  Source counts = 14508.6 +/- 143.1
  Background counts = 5965.8
  Rate = 0.1 +/- 0.001
[Wed Aug  1 09:25:54 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 09:25:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 09:25:54 2012] Assessing source extent using major axis lower bound
[Wed Aug  1 09:25:54 2012] Source does appear to be extended
[Wed Aug  1 09:25:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  1 14:38:06 2012] Counts = 14508.600000, rescaling region sizes by 3.000000
[Wed Aug  1 14:38:07 2012] XMMSAS src. selection expression = ellipse(26476.023200, 27799.529600, 970.338628, 970.338628, 0.000000, X, Y)
[Wed Aug  1 14:38:07 2012] Writing source region out to fullrun_mos2_xmm0090030201_pi300-10000_pass1_cl_src1_src.reg
[Wed Aug  1 14:38:07 2012] Extracting stamp from image fullrun_mos2_xmm0090030201_pi300-10000_cl_sm2.00.img.gz, (249, 264) - (361, 376)
[Wed Aug  1 14:38:07 2012] XMMSAS bgd. selection expression = annulus(26476.023200, 27799.529600, 4851.693140, 9703.386279, X, Y) && !ellipse(36550.746979, 25155.796661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17958.815384, 23896.200317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29586.265200, 24824.110600, 360.698410, 360.698410, 0.000000, X, Y) && !ellipse(28849.797333, 37184.637878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29628.360000, 34795.406000, 369.809611, 242.710407, 38.403200, X, Y) && !ellipse(35646.520000, 27331.846000, 481.999214, 481.999214, 0.000000, X, Y) && !ellipse(26455.821136, 34508.907318, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32778.606600, 36043.158800, 265.641608, 265.641608, 0.000000, X, Y) && !ellipse(33799.560486, 36692.419342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34988.832000, 24791.429600, 391.256011, 391.256011, 0.000000, X, Y) && !ellipse(17535.432900, 21960.239000, 353.068810, 353.068810, 0.000000, X, Y) && !ellipse(21640.388800, 28104.657400, 331.061610, 331.061610, 0.000000, X, Y) && !ellipse(36388.015800, 34547.780600, 378.972811, 241.916807, 46.874600, X, Y) && !ellipse(25355.269012, 20602.544876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29494.563232, 19180.935989, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36884.784180, 29411.758179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29329.570600, 22676.400600, 370.986411, 370.986411, 0.000000, X, Y) && !ellipse(20184.091019, 24629.376038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22736.399560, 31189.959400, 451.143213, 451.143213, 0.000000, X, Y) && !ellipse(33491.080597, 32533.918640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29188.422280, 26975.902000, 746.754421, 746.754421, 0.000000, X, Y) && !ellipse(26824.238312, 29187.363068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23260.530548, 36697.633820, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30265.421783, 34484.109344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25274.482900, 17811.493800, 519.292815, 519.292815, 0.000000, X, Y) && !ellipse(27084.378082, 28240.579620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15982.772659, 21641.451202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26960.624512, 24964.977051, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug  1 14:38:07 2012] Writing fullrun_mos2_xmm0090030201_pi300-10000_pass1_cl_src1.gif
[Wed Aug  1 14:38:20 2012] Mean detx,y = (8.11, -61.55) 
[Wed Aug  1 14:38:22 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug  1 14:41:57 2012] Binned source spectrum to 10 counts/bin
[Wed Aug  1 14:41:57 2012] Setting source spectrum file to fullrun_mos2_xmm0090030201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug  1 14:41:57 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0090030201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Aug  1 15:37:20 2012] Updating aperture counts using extracted products
[Wed Aug  1 15:37:20 2012] Error reading totcts from fullrun_mos2_xmm0090030201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug  1 15:37:20 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  1 15:37:20 2012] Using photon index=1.80, rate=0.129, arf fullrun_mos2_xmm0090030201_pi300-10000_pass1_cl_src1.arf
[Wed Aug  1 15:37:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  1 15:37:20 2012] Updating source flux to 1.6e-12
[Wed Aug  1 15:40:21 2012] Reading fit data from xmm0090030201/analysis//spectral/fullrun_mos2_xmm0090030201_pi300-10000_pass1_cl_src1_pl.csv
[Wed Aug  1 15:40:21 2012] Spectral fit parameter nH value = 9.71396e+20
[Wed Aug  1 15:40:21 2012] Spectral fit parameter PhoIndex value = 2.5596
[Wed Aug  1 15:40:21 2012] Failed to get F(0.3-8.0) from xmm0090030201/analysis//spectral/fullrun_mos2_xmm0090030201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Aug  1 15:40:21 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  1 15:40:21 2012] Using Nh = 9.7e+20, photon index=2.56, rate=0.129, arf fullrun_mos2_xmm0090030201_pi300-10000_pass1_cl_src1.arf
[Wed Aug  1 15:40:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  1 15:40:21 2012] Updating source flux to 1.3e-12