[Tue Jul 31 22:10:56 2012] Detection parameters:
  Position = (305.1, 320.1) = 13 8 7.35 -65 18 22.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 21534.7 +/- 177.7
  Background counts = 62.5
  Rate = 0.2 +/- 0.002

[Tue Jul 31 22:10:57 2012] Off-axis axis estimate = 1.64'
[Wed Aug  1 01:00:01 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 01:00:01 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Wed Aug  1 01:00:01 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Wed Aug  1 01:00:01 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Wed Aug  1 02:53:35 2012] fullrun_mos1_xmm0090030201_pi300-10000_cl_pass0_src1.ximg exists
[Wed Aug  1 02:53:35 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0090030201_pi300-10000_cl_pass0_src1.csv
[Wed Aug  1 02:53:35 2012] fullrun_mos1_xmm0090030201_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Aug  1 02:53:35 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0090030201_pi300-10000_cl_pass0_src1.csv
[Wed Aug  1 02:53:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0090030201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0090030201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 02:53:35 2012] fullrun_mos1_xmm0090030201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Aug  1 02:53:35 2012] fullrun_mos1_xmm0090030201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Aug  1 02:53:35 2012] Fit fullrun_mos1_xmm0090030201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Aug  1 04:18:39 2012] Spatial fit model total counts = 19276.000000, observed total counts = 19270.000000
[Wed Aug  1 04:18:39 2012] Offset between fit and detection position for source 1 = 0.158845 pixels
[Wed Aug  1 04:18:39 2012] 19314.680000 total counts/ 4777.680000 bgd. counts: snr = 210.313069
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.158845 pixels
  Position = (304.9, 320.1) = 13 8 7.46 -65 18 22.6
  Extent = 5.6 (5.5-5.6)", rotation angle = 0
  Source counts = 14537.0 +/- 139.0
  Background counts = 4777.7
  Rate = 0.1 +/- 0.001
[Wed Aug  1 04:18:39 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 04:18:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 04:18:39 2012] Assessing source extent using major axis lower bound
[Wed Aug  1 04:18:39 2012] Source does appear to be extended
[Wed Aug  1 04:18:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  1 06:55:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug  1 06:55:09 2012] Initial guess for spatial extent in simple fitting = 5.57"
[Wed Aug  1 06:55:09 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.260
[Wed Aug  1 06:55:09 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.57"
[Wed Aug  1 08:11:48 2012] fullrun_mos1_xmm0090030201_pi300-10000_cl_pass1_src1.ximg exists
[Wed Aug  1 08:11:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0090030201_pi300-10000_cl_pass1_src1.csv
[Wed Aug  1 08:11:48 2012] fullrun_mos1_xmm0090030201_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Aug  1 08:11:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0090030201_pi300-10000_cl_pass1_src1.csv
[Wed Aug  1 08:11:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0090030201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0090030201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 08:11:49 2012] fullrun_mos1_xmm0090030201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Aug  1 08:11:49 2012] fullrun_mos1_xmm0090030201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Aug  1 08:11:49 2012] Fit fullrun_mos1_xmm0090030201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Aug  1 09:25:45 2012] Spatial fit model total counts = 19240.200000, observed total counts = 19270.000000
[Wed Aug  1 09:25:45 2012] Offset between fit and detection position for source 1 = 0.000152 pixels
[Wed Aug  1 09:25:45 2012] 19279.870000 total counts/ 4763.370000 bgd. counts: snr = 210.331713
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000152 pixels
  Position = (304.9, 320.1) = 13 8 7.46 -65 18 22.6
  Extent = 5.6 (5.5-5.6)", rotation angle = 0
  Source counts = 14516.5 +/- 138.9
  Background counts = 4763.4
  Rate = 0.1 +/- 0.001
[Wed Aug  1 09:25:45 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 09:25:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 09:25:45 2012] Assessing source extent using major axis lower bound
[Wed Aug  1 09:25:45 2012] Source does appear to be extended
[Wed Aug  1 09:25:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  1 13:37:07 2012] Counts = 14516.500000, rescaling region sizes by 3.000000
[Wed Aug  1 13:37:07 2012] XMMSAS src. selection expression = ellipse(26478.107540, 27800.483800, 1005.192029, 1005.192029, 0.000000, X, Y)
[Wed Aug  1 13:37:07 2012] Writing source region out to fullrun_mos1_xmm0090030201_pi300-10000_pass1_cl_src1_src.reg
[Wed Aug  1 13:37:07 2012] Extracting stamp from image fullrun_mos1_xmm0090030201_pi300-10000_cl_sm2.00.img.gz, (247, 262) - (363, 378)
[Wed Aug  1 13:37:07 2012] XMMSAS bgd. selection expression = annulus(26478.107540, 27800.483800, 5025.960145, 10051.920289, X, Y) && !ellipse(36582.493164, 25177.305054, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29589.930000, 24820.977940, 332.932810, 332.932810, 0.000000, X, Y) && !ellipse(17939.814227, 23880.327222, 642.425096, 358.458999, 51.135177, X, Y) && !ellipse(25347.505200, 20429.428200, 313.436809, 313.436809, 0.000000, X, Y) && !ellipse(36415.600677, 34554.993317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28833.187469, 37193.521606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33755.227700, 36710.490290, 399.110411, 399.110411, 0.000000, X, Y) && !ellipse(29631.379547, 34776.531616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33602.578552, 33147.095001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18369.488000, 21255.457800, 474.198414, 474.198414, 0.000000, X, Y) && !ellipse(21684.396400, 28143.542200, 386.209611, 386.209611, 0.000000, X, Y) && !ellipse(23256.690680, 36661.153000, 486.271251, 486.271251, 0.000000, X, Y) && !ellipse(29381.000000, 27033.185400, 465.350413, 465.350413, 0.000000, X, Y) && !ellipse(26995.657623, 27026.732086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24253.893600, 18800.264800, 713.168821, 713.168821, 0.000000, X, Y) && !ellipse(36781.917000, 29345.659400, 428.675212, 428.675212, 0.000000, X, Y) && !ellipse(36686.092407, 37298.132416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33423.865875, 32541.806732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35000.008087, 24809.726868, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29487.421204, 19698.703873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26860.458221, 29150.920135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24422.883789, 28447.488708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31102.794128, 16926.747086, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug  1 13:37:07 2012] Writing fullrun_mos1_xmm0090030201_pi300-10000_pass1_cl_src1.gif
[Wed Aug  1 13:37:29 2012] Mean detx,y = (158.55, -165.46) 
[Wed Aug  1 13:37:33 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug  1 13:43:14 2012] Binned source spectrum to 10 counts/bin
[Wed Aug  1 13:43:14 2012] Setting source spectrum file to fullrun_mos1_xmm0090030201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug  1 13:43:14 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0090030201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Aug  1 15:37:19 2012] Updating aperture counts using extracted products
[Wed Aug  1 15:37:19 2012] Error reading totcts from fullrun_mos1_xmm0090030201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug  1 15:37:19 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  1 15:37:19 2012] Using photon index=1.80, rate=0.129, arf fullrun_mos1_xmm0090030201_pi300-10000_pass1_cl_src1.arf
[Wed Aug  1 15:37:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  1 15:37:19 2012] Updating source flux to 1.4e-12
[Wed Aug  1 15:38:26 2012] Reading fit data from xmm0090030201/analysis//spectral/fullrun_mos1_xmm0090030201_pi300-10000_pass1_cl_src1_pl.csv
[Wed Aug  1 15:38:26 2012] Spectral fit parameter nH value = 9.45272e+20
[Wed Aug  1 15:38:26 2012] Spectral fit parameter PhoIndex value = 2.60669
[Wed Aug  1 15:38:26 2012] Failed to get F(0.3-8.0) from xmm0090030201/analysis//spectral/fullrun_mos1_xmm0090030201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Aug  1 15:38:26 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  1 15:38:26 2012] Using Nh = 9.5e+20, photon index=2.61, rate=0.129, arf fullrun_mos1_xmm0090030201_pi300-10000_pass1_cl_src1.arf
[Wed Aug  1 15:38:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  1 15:38:26 2012] Updating source flux to 1.1e-12