[Sun Oct  9 12:00:16 2011] Detection parameters:
  Position = (270.2, 394.7) = 11 58 7.88 55 32 23.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 99.4 +/- 13.1
  Background counts = 21.3
  Rate = 0.01 +/- 0.001

[Sun Oct  9 12:00:17 2011] Off-axis axis estimate = 7.27'
[Sun Oct  9 12:01:07 2011] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting
[Sun Oct  9 12:01:07 2011] Initial guess for spatial extent in simple fitting = 10.07"
[Sun Oct  9 12:01:07 2011] source mask rpix=2.3, npix_max = 31, mask sum = 20, frac = 0.631
[Sun Oct  9 12:01:07 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 10.07"
[Sun Oct  9 12:48:29 2011] fullrun_pn_xmm0090020101_pi300-10000_cl_pass0_src4.ximg exists
[Sun Oct  9 12:48:29 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0090020101_pi300-10000_cl_pass0_src4.csv
[Sun Oct  9 12:48:29 2011] fullrun_pn_xmm0090020101_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun Oct  9 12:48:29 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0090020101_pi300-10000_cl_pass0_src4.csv
[Sun Oct  9 12:48:29 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0090020101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0090020101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  9 12:48:29 2011] fullrun_pn_xmm0090020101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun Oct  9 12:48:29 2011] fullrun_pn_xmm0090020101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun Oct  9 12:48:29 2011] Fit fullrun_pn_xmm0090020101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Sun Oct  9 13:28:50 2011] Spatial fit model total counts = 179.934000, observed total counts = 180.000000
[Sun Oct  9 13:28:50 2011] Offset between fit and detection position for source 4 = 0.779610 pixels
[Sun Oct  9 13:28:50 2011] 186.013000 total counts/ 124.525000 bgd. counts: snr = 5.510133
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.779610 pixels
  Position = (270.6, 394.1) = 11 58 7.68 55 32 25.8
  Extent = 4.7 (3.6-5.7)", rotation angle = 0
  Source counts = 61.5 +/- 13.6
  Background counts = 124.5
  Rate = 0.007 +/- 0.002
[Sun Oct  9 13:28:50 2011] Vigneting correction estimate = 1.000000
[Sun Oct  9 13:28:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  9 13:28:50 2011] Assessing source extent using major axis lower bound
[Sun Oct  9 13:28:50 2011] Source does appear to be extended
[Sun Oct  9 13:28:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  9 13:28:58 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct  9 13:28:58 2011] Initial guess for spatial extent in simple fitting = 4.69"
[Sun Oct  9 13:28:58 2011] source mask rpix=1.1, npix_max = 9, mask sum = 6, frac = 0.602
[Sun Oct  9 13:28:58 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 4.69"
[Sun Oct  9 14:46:49 2011] fullrun_pn_xmm0090020101_pi300-10000_cl_pass1_src3.ximg exists
[Sun Oct  9 14:46:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0090020101_pi300-10000_cl_pass1_src3.csv
[Sun Oct  9 14:46:49 2011] fullrun_pn_xmm0090020101_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Oct  9 14:46:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0090020101_pi300-10000_cl_pass1_src3.csv
[Sun Oct  9 14:46:49 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0090020101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0090020101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  9 14:46:49 2011] fullrun_pn_xmm0090020101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Oct  9 14:46:49 2011] fullrun_pn_xmm0090020101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Oct  9 14:46:49 2011] Fit fullrun_pn_xmm0090020101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Oct  9 15:07:38 2011] Spatial fit model total counts = 179.908000, observed total counts = 180.000000
[Sun Oct  9 15:07:38 2011] Offset between fit and detection position for source 4 = 0.021775 pixels
[Sun Oct  9 15:07:38 2011] 186.026800 total counts/ 125.028000 bgd. counts: snr = 5.455288
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.021775 pixels
  Position = (270.6, 394.0) = 11 58 7.68 55 32 25.7
  Extent = 4.6 (3.6-5.7)", rotation angle = 0
  Source counts = 61.0 +/- 13.6
  Background counts = 125.0
  Rate = 0.007 +/- 0.002
[Sun Oct  9 15:07:38 2011] Vigneting correction estimate = 1.000000
[Sun Oct  9 15:07:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  9 15:07:38 2011] Assessing source extent using major axis lower bound
[Sun Oct  9 15:07:38 2011] Source does appear to be extended
[Sun Oct  9 15:07:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  9 15:07:44 2011] XMMSAS src. selection expression = ellipse(23497.304000, 34232.340200, 278.992208, 278.992208, 0.000000, X, Y)
[Sun Oct  9 15:07:44 2011] Writing source region out to fullrun_pn_xmm0090020101_pi300-10000_pass1_cl_src4_src.reg
[Sun Oct  9 15:07:44 2011] Extracting stamp from image fullrun_pn_xmm0090020101_pi300-10000_cl_sm2.00.img.gz, (255, 378) - (287, 410)
[Sun Oct  9 15:07:44 2011] XMMSAS bgd. selection expression = annulus(23497.304000, 34232.340200, 464.987013, 929.974027, X, Y)
[Sun Oct  9 15:07:44 2011] Writing fullrun_pn_xmm0090020101_pi300-10000_pass1_cl_src4.gif
[Sun Oct  9 15:11:02 2011] Mean detx,y = (3464.92, -5922.59) 
[Sun Oct  9 15:11:03 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Oct  9 15:11:13 2011] Binned source spectrum to 10 counts/bin
[Sun Oct  9 15:11:13 2011] Setting source spectrum file to fullrun_pn_xmm0090020101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Oct  9 15:11:13 2011] Setting bgd. spectrum file to fullrun_pn_xmm0090020101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun Oct  9 15:52:57 2011] Not generating rmf since there are only 60 counts
[Sun Oct  9 15:52:57 2011] rmf not generated due to insufficient counts
[Sun Oct  9 17:37:13 2011] Updating aperture counts using extracted products
[Sun Oct  9 17:37:13 2011] Error reading totcts from fullrun_pn_xmm0090020101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Oct  9 17:37:13 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct  9 17:37:13 2011] Using photon index=1.80, rate=0.00735, arf fullrun_pn_xmm0090020101_pi300-10000_pass1_cl_src4.arf
[Sun Oct  9 17:37:13 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Oct  9 17:37:13 2011] Updating source flux to 6.3e-14
[Sun Oct  9 17:37:36 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting