[Sun Oct  9 12:00:16 2011] Detection parameters:
  Position = (374.5, 248.2) = 11 57 14.62 55 21 50.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 137.2 +/- 16.7
  Background counts = 24.4
  Rate = 0.02 +/- 0.003

[Sun Oct  9 12:00:17 2011] Off-axis axis estimate = 6.61'
[Sun Oct  9 12:01:07 2011] Using EEF radius (= 9.73 ")to estimate initial spatial extent for simple fitting
[Sun Oct  9 12:01:07 2011] Initial guess for spatial extent in simple fitting = 9.73"
[Sun Oct  9 12:01:07 2011] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.001
[Sun Oct  9 12:01:07 2011] Giving source the simple spatial ID 21 for pass 0, mean size = 9.73"
[Sun Oct  9 12:48:29 2011] fullrun_pn_xmm0090020101_pi300-10000_cl_pass0_src21.ximg exists
[Sun Oct  9 12:48:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0090020101_pi300-10000_cl_pass0_src21.csv
[Sun Oct  9 12:48:29 2011] fullrun_pn_xmm0090020101_pi300-10000_cl_pass0_src21_1.ximg exists
[Sun Oct  9 12:48:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0090020101_pi300-10000_cl_pass0_src21.csv
[Sun Oct  9 12:48:29 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0090020101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0090020101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  9 12:48:29 2011] fullrun_pn_xmm0090020101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sun Oct  9 12:48:29 2011] fullrun_pn_xmm0090020101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sun Oct  9 12:48:29 2011] Fit fullrun_pn_xmm0090020101_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Sun Oct  9 13:28:50 2011] Warning, spatial fit 21 centroid is now closest to src. 23
[Sun Oct  9 13:28:50 2011] Vigneting correction estimate = 1.000000
[Sun Oct  9 13:28:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  9 13:28:50 2011] Assessing source extent using major
[Sun Oct  9 13:28:50 2011] Source does appear to be extended
[Sun Oct  9 13:28:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  9 13:28:50 2011] Source is confused with source 23
[Sun Oct  9 13:28:58 2011] Using EEF radius (= 9.73 ")to estimate initial spatial extent for simple fitting
[Sun Oct  9 13:28:58 2011] Initial guess for spatial extent in simple fitting = 9.73"
[Sun Oct  9 13:28:58 2011] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.001
[Sun Oct  9 13:28:58 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 9.73"
[Sun Oct  9 14:46:49 2011] fullrun_pn_xmm0090020101_pi300-10000_cl_pass1_src19.ximg exists
[Sun Oct  9 14:46:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0090020101_pi300-10000_cl_pass1_src19.csv
[Sun Oct  9 14:46:49 2011] fullrun_pn_xmm0090020101_pi300-10000_cl_pass1_src19_1.ximg exists
[Sun Oct  9 14:46:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0090020101_pi300-10000_cl_pass1_src19.csv
[Sun Oct  9 14:46:49 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0090020101_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0090020101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  9 14:46:49 2011] fullrun_pn_xmm0090020101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sun Oct  9 14:46:49 2011] fullrun_pn_xmm0090020101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sun Oct  9 14:46:49 2011] Fit fullrun_pn_xmm0090020101_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Sun Oct  9 15:07:38 2011] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 22.039655 pixels away
[Sun Oct  9 15:07:38 2011] Spatial fit model total counts = 459.231000, observed total counts = 457.000000
[Sun Oct  9 15:07:38 2011] Offset between fit and detection position for source 21 = 8.230882 pixels
[Sun Oct  9 15:07:38 2011] 456.005000 total counts/ 110.826000 bgd. counts: snr = 32.788650
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 8.230882 pixels
  Position = (368.4, 253.7) = 11 57 17.73 55 22 14.9
  Extent = 19.5 (19.4-38.9)", rotation angle = 0
  Source counts = 345.2 +/- 21.4
  Background counts = 110.8
  Rate = 0.04 +/- 0.003
[Sun Oct  9 15:07:38 2011] Vigneting correction estimate = 1.000000
[Sun Oct  9 15:07:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  9 15:07:38 2011] Assessing source extent using major axis lower bound
[Sun Oct  9 15:07:38 2011] Source does appear to be extended
[Sun Oct  9 15:07:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  9 15:07:45 2011] XMMSAS src. selection expression = ellipse(32001.774000, 22022.484000, 1168.026034, 1168.026034, 0.000000, X, Y)
[Sun Oct  9 15:07:45 2011] Writing source region out to fullrun_pn_xmm0090020101_pi300-10000_pass1_cl_src21_src.reg
[Sun Oct  9 15:07:45 2011] Extracting stamp from image fullrun_pn_xmm0090020101_pi300-10000_cl_sm2.00.img.gz, (301, 187) - (436, 321)
[Sun Oct  9 15:07:45 2011] XMMSAS bgd. selection expression = annulus(32001.774000, 22022.484000, 1946.710056, 3893.420112, X, Y) && !ellipse(26704.102000, 26902.304000, 2292.592066, 2292.592066, 0.000000, X, Y) && !ellipse(27455.838000, 26292.768000, 1146.296033, 1146.296033, 0.000000, X, Y) && !ellipse(28206.016000, 25481.838000, 2424.256070, 2424.256070, 0.000000, X, Y) && !ellipse(28952.928000, 24831.460000, 1212.128035, 1212.128035, 0.000000, X, Y) && !ellipse(30011.952000, 23808.760000, 1379.368040, 1379.368040, 0.000000, X, Y) && !ellipse(36742.713562, 23627.437012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30647.550000, 23271.486000, 2574.928074, 2574.928074, 0.000000, X, Y) && !ellipse(30915.828000, 23010.830000, 1379.368040, 1379.368040, 0.000000, X, Y) && !ellipse(31477.190000, 22524.674000, 1923.448055, 1923.448055, 0.000000, X, Y) && !ellipse(32946.826400, 21136.039331, 3114.736090, 424.177612, 41.950000, X, Y) && !ellipse(33708.712000, 20509.720000, 1617.208047, 1617.208047, 0.000000, X, Y) && !ellipse(34273.500200, 19925.150000, 1705.864049, 423.418412, 43.682000, X, Y) && !ellipse(34672.130000, 19569.548000, 1761.184051, 395.931211, 42.497000, X, Y) && !ellipse(35207.494000, 19133.480000, 1579.256045, 1579.256045, 0.000000, X, Y) && !ellipse(36377.638000, 18108.416000, 1874.760054, 1874.760054, 323.113000, X, Y)
[Sun Oct  9 15:07:45 2011] Writing fullrun_pn_xmm0090020101_pi300-10000_pass1_cl_src21.gif
[Sun Oct  9 15:19:25 2011] Mean detx,y = (156.44, 8586.32) 
[Sun Oct  9 15:19:27 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Oct  9 15:20:01 2011] Binned source spectrum to 10 counts/bin
[Sun Oct  9 15:20:01 2011] Setting source spectrum file to fullrun_pn_xmm0090020101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sun Oct  9 15:20:01 2011] Setting bgd. spectrum file to fullrun_pn_xmm0090020101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Sun Oct  9 17:37:13 2011] Updating aperture counts using extracted products
[Sun Oct  9 17:37:13 2011] Error reading totcts from fullrun_pn_xmm0090020101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sun Oct  9 17:37:13 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct  9 17:37:13 2011] Using photon index=1.80, rate=0.0416, arf fullrun_pn_xmm0090020101_pi300-10000_pass1_cl_src21.arf
[Sun Oct  9 17:37:13 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Oct  9 17:37:13 2011] Updating source flux to 1.4e-13
[Sun Oct  9 17:37:36 2011] Flag c found in src. 21 procflags, skipping spectral fitting