[Sun Oct  9 12:00:18 2011] Detection parameters:
  Position = (304.9, 340.9) = 11 57 50.14 55 28 34.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 105.0 +/- 14.3
  Background counts = 9.7
  Rate = 0.009 +/- 0.001

[Sun Oct  9 12:00:18 2011] Off-axis axis estimate = 3.11'
[Sun Oct  9 13:00:54 2011] Using EEF radius (= 7.99 ")to estimate initial spatial extent for simple fitting
[Sun Oct  9 13:00:54 2011] Initial guess for spatial extent in simple fitting = 7.99"
[Sun Oct  9 13:00:54 2011] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.733
[Sun Oct  9 13:00:54 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 7.99"
[Sun Oct  9 13:28:44 2011] fullrun_mos2_xmm0090020101_pi300-10000_cl_pass0_src3.ximg exists
[Sun Oct  9 13:28:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0090020101_pi300-10000_cl_pass0_src3.csv
[Sun Oct  9 13:28:44 2011] fullrun_mos2_xmm0090020101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Oct  9 13:28:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0090020101_pi300-10000_cl_pass0_src3.csv
[Sun Oct  9 13:28:44 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0090020101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0090020101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  9 13:28:44 2011] fullrun_mos2_xmm0090020101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Oct  9 13:28:44 2011] fullrun_mos2_xmm0090020101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Oct  9 13:28:45 2011] Fit fullrun_mos2_xmm0090020101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Oct  9 13:28:53 2011] Spatial fit model total counts = 300.000000, observed total counts = 300.000000
[Sun Oct  9 13:28:53 2011] Offset between fit and detection position for source 4 = 0.285766 pixels
[Sun Oct  9 13:28:53 2011] 282.469900 total counts/ 216.797000 bgd. counts: snr = 4.460254
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.285766 pixels
  Position = (304.6, 341.0) = 11 57 50.28 55 28 35.1
  Extent = 4.6 (3.4-5.9)", rotation angle = 0
  Source counts = 65.7 +/- 16.8
  Background counts = 216.8
  Rate = 0.006 +/- 0.001
[Sun Oct  9 13:28:53 2011] Vigneting correction estimate = 1.000000
[Sun Oct  9 13:28:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  9 13:28:53 2011] Assessing source extent using major axis lower bound
[Sun Oct  9 13:28:53 2011] Source does appear to be extended
[Sun Oct  9 13:28:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  9 14:52:52 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct  9 14:52:52 2011] Initial guess for spatial extent in simple fitting = 4.56"
[Sun Oct  9 14:52:52 2011] source mask rpix=1.0, npix_max = 9, mask sum = 12, frac = 1.252
[Sun Oct  9 14:52:52 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 4.56"
[Sun Oct  9 15:07:34 2011] fullrun_mos2_xmm0090020101_pi300-10000_cl_pass1_src3.ximg exists
[Sun Oct  9 15:07:34 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0090020101_pi300-10000_cl_pass1_src3.csv
[Sun Oct  9 15:07:34 2011] fullrun_mos2_xmm0090020101_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Oct  9 15:07:34 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0090020101_pi300-10000_cl_pass1_src3.csv
[Sun Oct  9 15:07:34 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0090020101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0090020101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  9 15:07:34 2011] fullrun_mos2_xmm0090020101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Oct  9 15:07:34 2011] fullrun_mos2_xmm0090020101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Oct  9 15:07:34 2011] Fit fullrun_mos2_xmm0090020101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Oct  9 15:07:40 2011] Warning, spatial fit 3 centroid is now closest to src. 5
[Sun Oct  9 15:07:40 2011] Vigneting correction estimate = 1.000000
[Sun Oct  9 15:07:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  9 15:07:40 2011] Assessing source extent using major axis lower bound
[Sun Oct  9 15:07:40 2011] Source does appear to be extended
[Sun Oct  9 15:07:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  9 17:25:40 2011] XMMSAS src. selection expression = ellipse(26451.242800, 29620.439400, 273.566408, 273.566408, 0.000000, X, Y)
[Sun Oct  9 17:25:40 2011] Writing source region out to fullrun_mos2_xmm0090020101_pi300-10000_pass1_cl_src4_src.reg
[Sun Oct  9 17:25:40 2011] Extracting stamp from image fullrun_mos2_xmm0090020101_pi300-10000_cl_sm2.00.img.gz, (289, 325) - (320, 357)
[Sun Oct  9 17:25:40 2011] XMMSAS bgd. selection expression = annulus(26451.242800, 29620.439400, 455.944013, 911.888026, X, Y) && !ellipse(25470.397400, 27972.658000, 1473.818442, 1473.818442, 0.000000, X, Y) && !ellipse(25634.240906, 29108.317535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26075.918000, 28599.296800, 767.728022, 767.728022, 0.000000, X, Y)
[Sun Oct  9 17:25:40 2011] Writing fullrun_mos2_xmm0090020101_pi300-10000_pass1_cl_src4.gif
[Sun Oct  9 17:28:40 2011] Mean detx,y = (-1872.34, 496.23) 
[Sun Oct  9 17:28:41 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Oct  9 17:28:45 2011] Binned source spectrum to 10 counts/bin
[Sun Oct  9 17:28:45 2011] Setting source spectrum file to fullrun_mos2_xmm0090020101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Oct  9 17:28:45 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0090020101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun Oct  9 17:32:14 2011] Not generating rmf since there are only 65 counts
[Sun Oct  9 17:32:14 2011] rmf not generated due to insufficient counts
[Sun Oct  9 17:37:14 2011] Updating aperture counts using extracted products
[Sun Oct  9 17:37:14 2011] Error reading totcts from fullrun_mos2_xmm0090020101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Oct  9 17:37:14 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct  9 17:37:14 2011] Using photon index=1.80, rate=0.00552, arf fullrun_mos2_xmm0090020101_pi300-10000_pass1_cl_src4.arf
[Sun Oct  9 17:37:14 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Oct  9 17:37:14 2011] Updating source flux to 6.5e-14
[Sun Oct  9 17:37:23 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting