[Sun Oct  9 12:00:17 2011] Detection parameters:
  Position = (279.6, 318.8) = 11 58 3.04 55 26 59.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.6 +/- 11.8
  Background counts = 8.6
  Rate = 0.004 +/- 0.001

[Sun Oct  9 12:00:17 2011] Off-axis axis estimate = 2.01'
[Sun Oct  9 12:48:29 2011] Using EEF radius (= 7.43 ")to estimate initial spatial extent for simple fitting
[Sun Oct  9 12:48:29 2011] Initial guess for spatial extent in simple fitting = 7.43"
[Sun Oct  9 12:48:29 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.025
[Sun Oct  9 12:48:29 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 7.43"
[Sun Oct  9 13:00:54 2011] fullrun_mos1_xmm0090020101_pi300-10000_cl_pass0_src10.ximg exists
[Sun Oct  9 13:00:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0090020101_pi300-10000_cl_pass0_src10.csv
[Sun Oct  9 13:00:54 2011] fullrun_mos1_xmm0090020101_pi300-10000_cl_pass0_src10_1.ximg exists
[Sun Oct  9 13:00:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0090020101_pi300-10000_cl_pass0_src10.csv
[Sun Oct  9 13:00:54 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0090020101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0090020101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  9 13:00:54 2011] fullrun_mos1_xmm0090020101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sun Oct  9 13:00:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0090020101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sun Oct  9 13:00:54 2011] fullrun_mos1_xmm0090020101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sun Oct  9 13:00:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0090020101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sun Oct  9 13:00:54 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0090020101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0090020101_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  9 13:28:52 2011] Source 7 is offset by 0.102100 and 2.367228 pixels which is larger than
2 X fitted extent = 5.818391 x 2.285251, not incorporating fit results
[Sun Oct  9 13:28:52 2011] Spatial fit model total counts = 437.161000, observed total counts = 586.000000
[Sun Oct  9 13:28:52 2011] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Oct  9 13:28:52 2011] Vigneting correction estimate = 1.000000
[Sun Oct  9 13:28:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  9 13:28:52 2011] Assessing source extent using major
[Sun Oct  9 13:28:52 2011] Source does appear to be extended
[Sun Oct  9 13:28:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  9 13:28:52 2011] Deleting source due to low Poisson probability 0.9