[Fri May 25 10:24:03 2012] Detection parameters:
  Position = (296.4, 274.1) = 13 8 48.22 21 27 5.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31774.3 +/- 214.2
  Background counts = 549.7
  Rate = 2 +/- 0.02

[Fri May 25 10:24:03 2012] Off-axis axis estimate = 1.77'
[Fri May 25 10:31:08 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Fri May 25 10:31:08 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Fri May 25 10:31:08 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.051
[Fri May 25 10:31:08 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.31"
[Fri May 25 11:10:33 2012] fullrun_pn_xmm0090010101_pi300-10000_cl_pass0_src1.ximg exists
[Fri May 25 11:10:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0090010101_pi300-10000_cl_pass0_src1.csv
[Fri May 25 11:10:33 2012] fullrun_pn_xmm0090010101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri May 25 11:10:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0090010101_pi300-10000_cl_pass0_src1.csv
[Fri May 25 11:10:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0090010101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0090010101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 11:10:34 2012] fullrun_pn_xmm0090010101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri May 25 11:10:34 2012] fullrun_pn_xmm0090010101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri May 25 11:10:34 2012] Fit fullrun_pn_xmm0090010101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri May 25 11:23:07 2012] Spatial fit model total counts = 31828.800000, observed total counts = 31547.000000
[Fri May 25 11:23:07 2012] Offset between fit and detection position for source 1 = 0.089716 pixels
[Fri May 25 11:23:07 2012] 31875.100000 total counts/ 10944.500000 bgd. counts: snr = 200.070803
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.089716 pixels
  Position = (296.3, 274.1) = 13 8 48.24 21 27 6.1
  Extent = 5.6 (5.6-5.7)", rotation angle = 0
  Source counts = 20930.6 +/- 178.5
  Background counts = 10944.5
  Rate = 1 +/- 0.01
[Fri May 25 11:23:07 2012] Vigneting correction estimate = 1.000000
[Fri May 25 11:23:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 11:23:07 2012] Assessing source extent using major axis lower bound
[Fri May 25 11:23:07 2012] Source does appear to be extended
[Fri May 25 11:23:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 11:23:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 25 11:23:15 2012] Initial guess for spatial extent in simple fitting = 5.61"
[Fri May 25 11:23:15 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.938
[Fri May 25 11:23:15 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.61"
[Fri May 25 12:52:21 2012] fullrun_pn_xmm0090010101_pi300-10000_cl_pass1_src1.ximg exists
[Fri May 25 12:52:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0090010101_pi300-10000_cl_pass1_src1.csv
[Fri May 25 12:52:21 2012] fullrun_pn_xmm0090010101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri May 25 12:52:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0090010101_pi300-10000_cl_pass1_src1.csv
[Fri May 25 12:52:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0090010101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0090010101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 12:52:22 2012] fullrun_pn_xmm0090010101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri May 25 12:52:22 2012] fullrun_pn_xmm0090010101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri May 25 12:52:22 2012] Fit fullrun_pn_xmm0090010101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri May 25 13:01:22 2012] Spatial fit model total counts = 31840.200000, observed total counts = 31547.000000
[Fri May 25 13:01:22 2012] Offset between fit and detection position for source 1 = 0.001811 pixels
[Fri May 25 13:01:22 2012] 31886.800000 total counts/ 10938.300000 bgd. counts: snr = 200.298647
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.001811 pixels
  Position = (296.3, 274.1) = 13 8 48.24 21 27 6.1
  Extent = 5.6 (5.5-5.7)", rotation angle = 0
  Source counts = 20948.5 +/- 178.6
  Background counts = 10938.3
  Rate = 1 +/- 0.01
[Fri May 25 13:01:22 2012] Vigneting correction estimate = 1.000000
[Fri May 25 13:01:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 13:01:22 2012] Assessing source extent using major axis lower bound
[Fri May 25 13:01:22 2012] Source does appear to be extended
[Fri May 25 13:01:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 13:01:28 2012] Counts = 20948.500000, rescaling region sizes by 3.000000
[Fri May 25 13:01:28 2012] XMMSAS src. selection expression = ellipse(25731.814600, 23801.820800, 1007.733629, 1007.733629, 0.000000, X, Y)
[Fri May 25 13:01:28 2012] Writing source region out to fullrun_pn_xmm0090010101_pi300-10000_pass1_cl_src1_src.reg
[Fri May 25 13:01:28 2012] Extracting stamp from image fullrun_pn_xmm0090010101_pi300-10000_cl_sm2.00.img.gz, (238, 216) - (354, 332)
[Fri May 25 13:01:28 2012] XMMSAS bgd. selection expression = annulus(25731.814600, 23801.820800, 5038.668145, 10077.336290, X, Y) && !ellipse(26827.979248, 24141.195801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27592.396698, 24301.586121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27248.254000, 24662.370000, 1161.584033, 1161.584033, 0.000000, X, Y) && !ellipse(26671.213043, 25936.425720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25628.466217, 25255.697449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26305.108398, 26722.930359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24505.070221, 22870.156281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23872.236023, 22497.307861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23457.196533, 22335.781189, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 25 13:01:28 2012] Writing fullrun_pn_xmm0090010101_pi300-10000_pass1_cl_src1.gif
[Fri May 25 13:04:02 2012] Mean detx,y = (40.18, -309.09) 
[Fri May 25 13:04:08 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 25 13:05:47 2012] Binned source spectrum to 10 counts/bin
[Fri May 25 13:05:47 2012] Setting source spectrum file to fullrun_pn_xmm0090010101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri May 25 13:05:47 2012] Setting bgd. spectrum file to fullrun_pn_xmm0090010101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri May 25 14:20:22 2012] Updating aperture counts using extracted products
[Fri May 25 14:20:22 2012] Error reading totcts from fullrun_pn_xmm0090010101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri May 25 14:20:22 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 25 14:20:22 2012] Using photon index=1.80, rate=1.19, arf fullrun_pn_xmm0090010101_pi300-10000_pass1_cl_src1.arf
[Fri May 25 14:20:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 25 14:20:22 2012] Updating source flux to 2.7e-12
[Fri May 25 14:21:26 2012] Reading fit data from xmm0090010101/analysis//spectral/fullrun_pn_xmm0090010101_pi300-10000_pass1_cl_src1_pl.csv
[Fri May 25 14:21:26 2012] Spectral fit parameter nH value = 2.30598e+21
[Fri May 25 14:21:26 2012] Spectral fit parameter PhoIndex value = 6.53868
[Fri May 25 14:21:26 2012] Failed to get F(0.3-8.0) from xmm0090010101/analysis//spectral/fullrun_pn_xmm0090010101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri May 25 14:21:26 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 25 14:21:26 2012] Using Nh = 2.3e+21, photon index=6.54, rate=1.19, arf fullrun_pn_xmm0090010101_pi300-10000_pass1_cl_src1.arf
[Fri May 25 14:21:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 25 14:21:26 2012] Updating source flux to 1.3e-12