[Wed Mar 21 11:29:19 2012] Detection parameters:
  Position = (434.9, 196.9) = 14 17 16.53 24 59 6.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 275.6 +/- 20.8
  Background counts = 12.1
  Rate = 0.009 +/- 0.0007

[Wed Mar 21 11:29:20 2012] Off-axis axis estimate = 12.33'
[Mon Mar 26 04:30:22 2012] Using EEF radius (= 12.60 ")to estimate initial spatial extent for simple fitting
[Mon Mar 26 04:30:22 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Mar 26 04:30:22 2012] Initial guess for spatial extent in simple fitting = 12.60"
[Mon Mar 26 04:30:22 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.911
[Mon Mar 26 04:30:22 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 12.60"
[Mon Mar 26 06:17:54 2012] fullrun_mos2_xmm0089960401_pi300-10000_cl_pass0_src7.ximg exists
[Mon Mar 26 06:17:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089960401_pi300-10000_cl_pass0_src7.csv
[Mon Mar 26 06:17:54 2012] fullrun_mos2_xmm0089960401_pi300-10000_cl_pass0_src7_1.ximg exists
[Mon Mar 26 06:17:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089960401_pi300-10000_cl_pass0_src7.csv
[Mon Mar 26 06:17:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0089960401_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0089960401_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 26 06:17:55 2012] fullrun_mos2_xmm0089960401_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Mon Mar 26 06:17:55 2012] fullrun_mos2_xmm0089960401_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Mon Mar 26 06:17:55 2012] Fit fullrun_mos2_xmm0089960401_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Mon Mar 26 06:18:13 2012] Source 7 is offset by -6.444831 and -1.558410 pixels which is larger than
2 X fitted extent = 1.447793 x 1.447793, not incorporating fit results
[Mon Mar 26 06:18:14 2012] Vigneting correction estimate = 1.000000
[Mon Mar 26 06:18:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 26 06:18:14 2012] Assessing source extent using major
[Mon Mar 26 06:18:14 2012] Source does appear to be extended
[Mon Mar 26 06:18:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 07:46:02 2012] Using EEF radius (= 12.60 ")to estimate initial spatial extent for simple fitting
[Mon Mar 26 07:46:02 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Mar 26 07:46:02 2012] Initial guess for spatial extent in simple fitting = 12.60"
[Mon Mar 26 07:46:02 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.911
[Mon Mar 26 07:46:02 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 12.60"
[Mon Mar 26 10:58:46 2012] fullrun_mos2_xmm0089960401_pi300-10000_cl_pass1_src7.ximg exists
[Mon Mar 26 10:58:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089960401_pi300-10000_cl_pass1_src7.csv
[Mon Mar 26 10:58:46 2012] fullrun_mos2_xmm0089960401_pi300-10000_cl_pass1_src7_1.ximg exists
[Mon Mar 26 10:58:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089960401_pi300-10000_cl_pass1_src7.csv
[Mon Mar 26 10:58:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0089960401_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0089960401_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 26 10:58:46 2012] fullrun_mos2_xmm0089960401_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Mon Mar 26 10:58:46 2012] fullrun_mos2_xmm0089960401_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Mon Mar 26 10:58:46 2012] Fit fullrun_mos2_xmm0089960401_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Mon Mar 26 10:59:02 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 16.553644 pixels away
[Mon Mar 26 10:59:02 2012] Vigneting correction estimate = 1.000000
[Mon Mar 26 10:59:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 26 10:59:02 2012] Assessing source extent using major
[Mon Mar 26 10:59:02 2012] Source does appear to be extended
[Mon Mar 26 10:59:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 11:54:06 2012] XMMSAS src. selection expression = ellipse(37789.275665, 17078.420944, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Mar 26 11:54:06 2012] Writing source region out to fullrun_mos2_xmm0089960401_pi300-10000_pass1_cl_src7_src.reg
[Mon Mar 26 11:54:06 2012] Extracting stamp from image fullrun_mos2_xmm0089960401_pi300-10000_cl_sm2.00.img.gz, (397, 159) - (472, 234)
[Mon Mar 26 11:54:06 2012] XMMSAS bgd. selection expression = annulus(37789.275665, 17078.420944, 1087.500000, 2175.000000, X, Y)
[Mon Mar 26 11:54:06 2012] Writing fullrun_mos2_xmm0089960401_pi300-10000_pass1_cl_src7.gif
[Mon Mar 26 12:05:37 2012] Mean detx,y = (-5395.64, -14873.77) 
[Mon Mar 26 12:05:40 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 26 12:06:01 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 26 12:06:01 2012] Setting source spectrum file to fullrun_mos2_xmm0089960401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Mon Mar 26 12:06:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0089960401_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Mon Mar 26 12:19:28 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Mar 26 12:19:28 2012] rmf not generated due to insufficient counts
[Mon Mar 26 12:20:44 2012] Updating aperture counts using extracted products
[Mon Mar 26 12:20:44 2012] Error reading totcts from fullrun_mos2_xmm0089960401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Mon Mar 26 12:20:44 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 12:20:44 2012] Using photon index=1.80, rate=0.00918, arf fullrun_mos2_xmm0089960401_pi300-10000_pass1_cl_src7.arf
[Mon Mar 26 12:20:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 12:20:44 2012] Updating source flux to 2.3e-13
[Mon Mar 26 12:21:29 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting