[Mon Jun 17 09:53:59 2013] Detection parameters:
  Position = (322.1, 282.9) = 14 17 52.43 25 5 21.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1486.0 +/- 60.7
  Background counts = 592.7
  Rate = 0.03 +/- 0.001

[Mon Jun 17 09:53:59 2013] Off-axis axis estimate = 2.05'
[Mon Jun 17 10:17:44 2013] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 10:17:44 2013] Initial guess for spatial extent in simple fitting = 7.45"
[Mon Jun 17 10:17:44 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.816
[Mon Jun 17 10:17:44 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 7.45"
[Mon Jun 17 10:35:05 2013] fullrun_pn_xmm0089960301_pi300-10000_cl_pass0_src5.ximg exists
[Mon Jun 17 10:35:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089960301_pi300-10000_cl_pass0_src5.csv
[Mon Jun 17 10:35:05 2013] fullrun_pn_xmm0089960301_pi300-10000_cl_pass0_src5_1.ximg exists
[Mon Jun 17 10:35:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089960301_pi300-10000_cl_pass0_src5.csv
[Mon Jun 17 10:35:05 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0089960301_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0089960301_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 10:35:05 2013] fullrun_pn_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Mon Jun 17 10:35:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src5.csv
[Mon Jun 17 10:35:05 2013] fullrun_pn_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Mon Jun 17 10:35:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src5.csv
[Mon Jun 17 10:35:05 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 12:52:13 2013] Warning, spatial fit 5 centroid is now closest to src. 4
[Mon Jun 17 12:52:13 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 12:52:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 12:52:13 2013] Assessing source extent using major
[Mon Jun 17 12:52:13 2013] Source does appear to be extended
[Mon Jun 17 12:52:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 12:52:13 2013] Source is confused with source 3
[Mon Jun 17 12:52:35 2013] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 12:52:35 2013] Initial guess for spatial extent in simple fitting = 7.45"
[Mon Jun 17 12:52:35 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.816
[Mon Jun 17 12:52:35 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 7.45"
[Mon Jun 17 13:15:05 2013] fullrun_pn_xmm0089960301_pi300-10000_cl_pass1_src4.ximg exists
[Mon Jun 17 13:15:05 2013] fullrun_pn_xmm0089960301_pi300-10000_cl_pass1_src4_1.ximg exists
[Mon Jun 17 13:15:05 2013] Fit fullrun_pn_xmm0089960301_pi300-10000_cl_pass1_src4 appears to have run properly
[Mon Jun 17 13:15:05 2013] fullrun_pn_xmm0089960301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Mon Jun 17 13:15:05 2013] fullrun_pn_xmm0089960301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Mon Jun 17 13:15:05 2013] Fit fullrun_pn_xmm0089960301_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Mon Jun 17 15:23:18 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 18.401772 pixels away
[Mon Jun 17 15:23:18 2013] Spatial fit model total counts = 9841.710000, observed total counts = 9363.000000
[Mon Jun 17 15:23:18 2013] Offset between fit and detection position for source 5 = 0.177289 pixels
[Mon Jun 17 15:23:18 2013] 9902.250000 total counts/ 7739.620000 bgd. counts: snr = 24.582294
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.177289 pixels
  Position = (321.9, 282.9) = 14 17 52.48 25 5 21.8
  Extent = 14.9 (14.8-29.8)" x 5.0 (4.7-5.5)", rotation angle = 61 (59-62) degrees
  Source counts = 2162.6 +/- 99.5
  Background counts = 7739.6
  Rate = 0.03 +/- 0.001
[Mon Jun 17 15:23:18 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 15:23:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 15:23:18 2013] Assessing source extent using major axis lower bound
[Mon Jun 17 15:23:18 2013] Source does appear to be extended
[Mon Jun 17 15:23:18 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.70
[Mon Jun 17 15:23:18 2013] Source is asymmetric
[Mon Jun 17 15:23:36 2013] Counts = 2162.630000, rescaling region sizes by 2.000000
[Mon Jun 17 15:23:36 2013] XMMSAS src. selection expression = ellipse(27960.365180, 24561.020800, 1788.948051, 602.748017, 60.692500, X, Y)
[Mon Jun 17 15:23:36 2013] Writing source region out to fullrun_pn_xmm0089960301_pi300-10000_pass1_cl_src5_src.reg
[Mon Jun 17 15:23:36 2013] Extracting stamp from image fullrun_pn_xmm0089960301_pi300-10000_cl_sm2.00.img.gz, (219, 180) - (425, 386)
[Mon Jun 17 15:23:36 2013] XMMSAS bgd. selection expression = annulus(27960.365180, 24561.020800, 5963.160172, 11926.320343, X, Y) && !ellipse(26018.786200, 27961.695400, 1791.768052, 1775.733651, 59.582495, X, Y) && !ellipse(27546.780400, 25270.923600, 1161.840033, 393.728011, 59.694200, X, Y) && !ellipse(27703.755400, 25012.791800, 1584.368046, 389.352011, 59.064000, X, Y)
[Mon Jun 17 15:23:36 2013] Writing fullrun_pn_xmm0089960301_pi300-10000_pass1_cl_src5.gif
[Mon Jun 17 15:57:18 2013] Mean detx,y = (226.55, 3468.23) 
[Mon Jun 17 15:57:31 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 17 15:59:33 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 17 15:59:33 2013] Setting source spectrum file to fullrun_pn_xmm0089960301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon Jun 17 15:59:33 2013] Setting bgd. spectrum file to fullrun_pn_xmm0089960301_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Mon Jun 17 17:14:56 2013] Updating aperture counts using extracted products
[Mon Jun 17 17:14:56 2013] Total counts from fullrun_pn_xmm0089960301_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 11701.00
[Mon Jun 17 17:14:56 2013] Total counts from fullrun_pn_xmm0089960301_pi300-10000_pass1_cl_src5_bgd.pi.gz = 0.00
[Mon Jun 17 17:14:56 2013] Got source and background scale factors 2920909.000000, 0.000000
[Mon Jun 17 17:14:56 2013] Background scale factor is not positive, halting re-assessment of this source
[Mon Jun 17 17:14:56 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 17 17:14:56 2013] Using photon index=1.80, rate=0.0257, arf fullrun_pn_xmm0089960301_pi300-10000_pass1_cl_src5.arf
[Mon Jun 17 17:14:56 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 17 17:14:56 2013] Updating source flux to 9.9e-14
[Mon Jun 17 17:15:13 2013] Flag c found in src. 5 procflags, skipping spectral fitting
[Mon Jun 17 17:15:17 2013] xmm0089960301/analysis//spectral/fullrun_pn_xmm0089960301_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete