[Mon Jun 17 09:54:55 2013] Detection parameters:
  Position = (311.9, 320.5) = 14 17 55.70 25 8 2.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1049.0 +/- 55.3
  Background counts = 91.1
  Rate = 0.02 +/- 0.0009

[Mon Jun 17 09:54:56 2013] Off-axis axis estimate = 1.87'
[Mon Jun 17 11:41:55 2013] Using EEF radius (= 7.37 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 11:41:55 2013] Initial guess for spatial extent in simple fitting = 7.37"
[Mon Jun 17 11:41:55 2013] source mask rpix=1.7, npix_max = 19, mask sum = 11, frac = 0.572
[Mon Jun 17 11:41:55 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 7.37"
[Mon Jun 17 12:52:11 2013] fullrun_mos2_xmm0089960301_pi300-10000_cl_pass0_src3.ximg exists
[Mon Jun 17 12:52:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089960301_pi300-10000_cl_pass0_src3.csv
[Mon Jun 17 12:52:11 2013] fullrun_mos2_xmm0089960301_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Jun 17 12:52:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089960301_pi300-10000_cl_pass0_src3.csv
[Mon Jun 17 12:52:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0089960301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0089960301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 12:52:11 2013] fullrun_mos2_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Jun 17 12:52:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Jun 17 12:52:11 2013] fullrun_mos2_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Jun 17 12:52:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Jun 17 12:52:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 12:52:26 2013] Source 9 is offset by -5.309045 and -0.727012 pixels which is larger than
2 X fitted extent = 1.149747 x 1.149747, not incorporating fit results
[Mon Jun 17 12:52:26 2013] Source 9 is offset by 7.794403 and -0.949997 pixels which is larger than
2 X fitted extent = 2.859283 x 2.859283, not incorporating fit results
[Mon Jun 17 12:52:26 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 12:52:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 12:52:26 2013] Assessing source extent using major
[Mon Jun 17 12:52:26 2013] Source does appear to be extended
[Mon Jun 17 12:52:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 12:52:26 2013] Source is confused with source 8
[Mon Jun 17 14:15:35 2013] Using EEF radius (= 7.37 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 14:15:35 2013] Initial guess for spatial extent in simple fitting = 7.37"
[Mon Jun 17 14:15:35 2013] source mask rpix=1.7, npix_max = 19, mask sum = 11, frac = 0.572
[Mon Jun 17 14:15:35 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 7.37"
[Mon Jun 17 15:23:16 2013] fullrun_mos2_xmm0089960301_pi300-10000_cl_pass1_src3.ximg exists
[Mon Jun 17 15:23:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089960301_pi300-10000_cl_pass1_src3.csv
[Mon Jun 17 15:23:16 2013] fullrun_mos2_xmm0089960301_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Jun 17 15:23:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089960301_pi300-10000_cl_pass1_src3.csv
[Mon Jun 17 15:23:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0089960301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0089960301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 15:23:16 2013] fullrun_mos2_xmm0089960301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Jun 17 15:23:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089960301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Mon Jun 17 15:23:16 2013] fullrun_mos2_xmm0089960301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Jun 17 15:23:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089960301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Mon Jun 17 15:23:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0089960301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0089960301_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 15:23:28 2013] Warning, spatial fit 3 centroid is now closest to src. 8
[Mon Jun 17 15:23:28 2013] Source 9 is offset by 7.794403 and -0.952594 pixels which is larger than
2 X fitted extent = 2.852405 x 2.852405, not incorporating fit results
[Mon Jun 17 15:23:28 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 15:23:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 15:23:28 2013] Assessing source extent using major
[Mon Jun 17 15:23:28 2013] Source does appear to be extended
[Mon Jun 17 15:23:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 16:33:29 2013] Counts = 1049.014648, rescaling region sizes by 2.000000
[Mon Jun 17 16:33:29 2013] XMMSAS src. selection expression = ellipse(27086.433075, 27834.174286, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Jun 17 16:33:29 2013] Writing source region out to fullrun_mos2_xmm0089960301_pi300-10000_pass1_cl_src9_src.reg
[Mon Jun 17 16:33:29 2013] Extracting stamp from image fullrun_mos2_xmm0089960301_pi300-10000_cl_sm2.00.img.gz, (237, 245) - (387, 395)
[Mon Jun 17 16:33:29 2013] XMMSAS bgd. selection expression = annulus(27086.433075, 27834.174286, 4350.000000, 8700.000000, X, Y) && !ellipse(26024.533000, 27955.051320, 1635.775247, 1486.401643, 329.715500, X, Y) && !ellipse(17630.012573, 31089.646423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26502.151398, 28881.463867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27026.049744, 28240.744232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36088.718781, 34500.315643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17568.577850, 31536.700256, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33138.689178, 19952.022873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35595.162109, 35924.632660, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 17 16:33:29 2013] Writing fullrun_mos2_xmm0089960301_pi300-10000_pass1_cl_src9.gif
[Mon Jun 17 16:38:43 2013] Mean detx,y = (58.12, 68.63) 
[Mon Jun 17 16:38:46 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 17 16:41:52 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 17 16:41:52 2013] Setting source spectrum file to fullrun_mos2_xmm0089960301_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Mon Jun 17 16:41:52 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0089960301_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Mon Jun 17 16:55:00 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 17 16:55:00 2013] rmf not generated due to insufficient counts
[Mon Jun 17 17:15:03 2013] Updating aperture counts using extracted products
[Mon Jun 17 17:15:03 2013] Total counts from fullrun_mos2_xmm0089960301_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 415391.00
[Mon Jun 17 17:15:03 2013] Total counts from fullrun_mos2_xmm0089960301_pi300-10000_pass1_cl_src9_bgd.pi.gz = 14143.00
[Mon Jun 17 17:15:03 2013] Got source and background scale factors 2107484.000000, 56814743.000000
[Mon Jun 17 17:15:04 2013] User source parameters:
  Position = (311.9, 320.5) = 14 17 55.70 25 8 2.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 414866.4 +/- 645.5
  Background aperture counts = 524.6
  Rate = 5 +/- 0.008

[Mon Jun 17 17:15:04 2013] Updating counts from extracted products
[Mon Jun 17 17:15:04 2013] Set source signif. to 414866.38/22.90 = 18112.81
[Mon Jun 17 17:15:07 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 17 17:15:07 2013] Using photon index=1.80, rate=5.24, arf fullrun_mos2_xmm0089960301_pi300-10000_pass1_cl_src9.arf
[Mon Jun 17 17:15:07 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 17 17:15:07 2013] Updating source flux to 6.2e-11
[Mon Jun 17 17:15:09 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 17 17:15:13 2013] xmm0089960301/analysis//spectral/fullrun_mos2_xmm0089960301_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete