[Mon Jun 17 09:54:55 2013] Detection parameters:
  Position = (311.2, 325.2) = 14 17 55.92 25 8 27.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 766.0 +/- 50.5
  Background counts = 91.2
  Rate = 0.01 +/- 0.0008

[Mon Jun 17 09:54:56 2013] Off-axis axis estimate = 2.15'
[Mon Jun 17 11:41:55 2013] Using EEF radius (= 7.50 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 11:41:55 2013] Initial guess for spatial extent in simple fitting = 7.50"
[Mon Jun 17 11:41:55 2013] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.657
[Mon Jun 17 11:41:55 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 7.50"
[Mon Jun 17 12:52:11 2013] fullrun_mos2_xmm0089960301_pi300-10000_cl_pass0_src4.ximg exists
[Mon Jun 17 12:52:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089960301_pi300-10000_cl_pass0_src4.csv
[Mon Jun 17 12:52:11 2013] fullrun_mos2_xmm0089960301_pi300-10000_cl_pass0_src4_1.ximg exists
[Mon Jun 17 12:52:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089960301_pi300-10000_cl_pass0_src4.csv
[Mon Jun 17 12:52:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0089960301_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0089960301_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 12:52:11 2013] fullrun_mos2_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Mon Jun 17 12:52:11 2013] fullrun_mos2_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Mon Jun 17 12:52:11 2013] Fit fullrun_mos2_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Mon Jun 17 12:52:26 2013] Warning, spatial fit 4 centroid is now closest to src. 9
[Mon Jun 17 12:52:26 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 12:52:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 12:52:26 2013] Assessing source extent using major
[Mon Jun 17 12:52:26 2013] Source does appear to be extended
[Mon Jun 17 12:52:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 12:52:26 2013] Source is confused with source 9
[Mon Jun 17 14:15:35 2013] Using EEF radius (= 7.50 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 14:15:35 2013] Initial guess for spatial extent in simple fitting = 7.50"
[Mon Jun 17 14:15:35 2013] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.657
[Mon Jun 17 14:15:35 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 7.50"
[Mon Jun 17 15:23:16 2013] fullrun_mos2_xmm0089960301_pi300-10000_cl_pass1_src4.ximg exists
[Mon Jun 17 15:23:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089960301_pi300-10000_cl_pass1_src4.csv
[Mon Jun 17 15:23:16 2013] fullrun_mos2_xmm0089960301_pi300-10000_cl_pass1_src4_1.ximg exists
[Mon Jun 17 15:23:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089960301_pi300-10000_cl_pass1_src4.csv
[Mon Jun 17 15:23:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0089960301_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0089960301_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 15:23:16 2013] fullrun_mos2_xmm0089960301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Mon Jun 17 15:23:16 2013] fullrun_mos2_xmm0089960301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Mon Jun 17 15:23:16 2013] Fit fullrun_mos2_xmm0089960301_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Mon Jun 17 15:23:28 2013] Source 8 is offset by 6.974181 and 2.767913 pixels which is larger than
2 X fitted extent = 6.772552 x 6.772552, not incorporating fit results
[Mon Jun 17 15:23:28 2013] Warning, spatial fit 4 centroid is now closest to src. 9
[Mon Jun 17 15:23:28 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 15:23:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 15:23:28 2013] Assessing source extent using major
[Mon Jun 17 15:23:28 2013] Source does appear to be extended
[Mon Jun 17 15:23:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 16:33:29 2013] XMMSAS src. selection expression = ellipse(27026.049744, 28240.744232, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 17 16:33:29 2013] Writing source region out to fullrun_mos2_xmm0089960301_pi300-10000_pass1_cl_src8_src.reg
[Mon Jun 17 16:33:29 2013] Extracting stamp from image fullrun_mos2_xmm0089960301_pi300-10000_cl_sm2.00.img.gz, (274, 288) - (349, 363)
[Mon Jun 17 16:33:29 2013] XMMSAS bgd. selection expression = annulus(27026.049744, 28240.744232, 1087.500000, 2175.000000, X, Y) && !ellipse(26024.533000, 27955.051320, 1635.775247, 1486.401643, 329.715500, X, Y) && !ellipse(27086.433075, 27834.174286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26502.151398, 28881.463867, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 17 16:33:29 2013] Writing fullrun_mos2_xmm0089960301_pi300-10000_pass1_cl_src8.gif
[Mon Jun 17 16:42:55 2013] Mean detx,y = (-572.78, -112.48) 
[Mon Jun 17 16:42:58 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 17 16:43:13 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 17 16:43:13 2013] Setting source spectrum file to fullrun_mos2_xmm0089960301_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Mon Jun 17 16:43:13 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0089960301_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Mon Jun 17 16:57:20 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 17 16:57:20 2013] rmf not generated due to insufficient counts
[Mon Jun 17 17:15:04 2013] Updating aperture counts using extracted products
[Mon Jun 17 17:15:04 2013] Total counts from fullrun_mos2_xmm0089960301_pi300-10000_pass1_cl_src8_src_b10.pi.gz = 13295.00
[Mon Jun 17 17:15:04 2013] Total counts from fullrun_mos2_xmm0089960301_pi300-10000_pass1_cl_src8_bgd.pi.gz = 0.00
[Mon Jun 17 17:15:04 2013] Got source and background scale factors 604450.000000, 0.000000
[Mon Jun 17 17:15:04 2013] Background scale factor is not positive, halting re-assessment of this source
[Mon Jun 17 17:15:07 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 17 17:15:07 2013] Using photon index=1.80, rate=0.0116, arf fullrun_mos2_xmm0089960301_pi300-10000_pass1_cl_src8.arf
[Mon Jun 17 17:15:07 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 17 17:15:07 2013] Updating source flux to 1.4e-13
[Mon Jun 17 17:15:09 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 17 17:15:13 2013] xmm0089960301/analysis//spectral/fullrun_mos2_xmm0089960301_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete