[Mon Jun 17 09:54:56 2013] Detection parameters:
  Position = (380.3, 143.0) = 14 17 33.83 24 55 11.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.6 +/- 14.2
  Background counts = 48.4
  Rate = 0.0008 +/- 0.0002

[Mon Jun 17 09:54:56 2013] Off-axis axis estimate = 12.74'
[Mon Jun 17 11:41:55 2013] Using EEF radius (= 12.80 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 11:41:55 2013] Initial guess for spatial extent in simple fitting = 12.80"
[Mon Jun 17 11:41:55 2013] source mask rpix=2.9, npix_max = 47, mask sum = 42, frac = 0.886
[Mon Jun 17 11:41:55 2013] Giving source the simple spatial ID 35 for pass 0, mean size = 12.80"
[Mon Jun 17 12:52:11 2013] fullrun_mos2_xmm0089960301_pi300-10000_cl_pass0_src35.ximg exists
[Mon Jun 17 12:52:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089960301_pi300-10000_cl_pass0_src35.csv
[Mon Jun 17 12:52:11 2013] fullrun_mos2_xmm0089960301_pi300-10000_cl_pass0_src35_1.ximg exists
[Mon Jun 17 12:52:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089960301_pi300-10000_cl_pass0_src35.csv
[Mon Jun 17 12:52:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0089960301_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0089960301_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 12:52:12 2013] fullrun_mos2_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Mon Jun 17 12:52:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src35.csv
[Mon Jun 17 12:52:12 2013] fullrun_mos2_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Mon Jun 17 12:52:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src35.csv
[Mon Jun 17 12:52:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 12:52:26 2013] Spatial fit model total counts = 485.997000, observed total counts = 439.000000
[Mon Jun 17 12:52:26 2013] Poor agreement between spatial fit and data for source 36
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 17 12:52:26 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 12:52:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 12:52:26 2013] Assessing source extent using major
[Mon Jun 17 12:52:26 2013] Source does appear to be extended
[Mon Jun 17 12:52:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 12:52:26 2013] Deleting source due to low Poisson probability 0.9