[Mon Jun 17 09:54:27 2013] Detection parameters:
  Position = (271.1, 217.9) = 14 18 8.77 25 0 42.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 258.4 +/- 19.8
  Background counts = 67.2
  Rate = 0.003 +/- 0.0002

[Mon Jun 17 09:54:28 2013] Off-axis axis estimate = 6.17'
[Mon Jun 17 10:35:05 2013] Using EEF radius (= 9.51 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 10:35:05 2013] Initial guess for spatial extent in simple fitting = 9.51"
[Mon Jun 17 10:35:05 2013] source mask rpix=2.2, npix_max = 28, mask sum = 18, frac = 0.623
[Mon Jun 17 10:35:05 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 9.51"
[Mon Jun 17 11:41:55 2013] fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_src11.ximg exists
[Mon Jun 17 11:41:55 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_src11.csv
[Mon Jun 17 11:41:55 2013] fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_src11_1.ximg exists
[Mon Jun 17 11:41:55 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_src11.csv
[Mon Jun 17 11:41:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 11:41:55 2013] fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Mon Jun 17 11:41:55 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src11.csv
[Mon Jun 17 11:41:55 2013] fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Mon Jun 17 11:41:55 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src11.csv
[Mon Jun 17 11:41:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 12:52:20 2013] Spatial fit model total counts = -23.637900, observed total counts = 470.000000
[Mon Jun 17 12:52:20 2013] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 17 12:52:20 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 12:52:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 12:52:20 2013] Assessing source extent using major
[Mon Jun 17 12:52:20 2013] Source does appear to be extended
[Mon Jun 17 12:52:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 13:15:05 2013] Using EEF radius (= 9.51 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 13:15:05 2013] Initial guess for spatial extent in simple fitting = 9.51"
[Mon Jun 17 13:15:05 2013] source mask rpix=2.2, npix_max = 28, mask sum = 18, frac = 0.623
[Mon Jun 17 13:15:05 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 9.51"
[Mon Jun 17 14:15:34 2013] fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_src11.ximg exists
[Mon Jun 17 14:15:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_src11.csv
[Mon Jun 17 14:15:34 2013] fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_src11_1.ximg exists
[Mon Jun 17 14:15:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_src11.csv
[Mon Jun 17 14:15:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 14:15:35 2013] fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Mon Jun 17 14:15:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_tfrozen_src11.csv
[Mon Jun 17 14:15:35 2013] fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Mon Jun 17 14:15:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_tfrozen_src11.csv
[Mon Jun 17 14:15:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 15:23:23 2013] Spatial fit model total counts = 940.814000, observed total counts = 470.000000
[Mon Jun 17 15:23:23 2013] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 17 15:23:23 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 15:23:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 15:23:23 2013] Assessing source extent using major
[Mon Jun 17 15:23:23 2013] Source does appear to be extended
[Mon Jun 17 15:23:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 16:10:37 2013] XMMSAS src. selection expression = ellipse(23533.114441, 18905.187302, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 17 16:10:37 2013] Writing source region out to fullrun_mos1_xmm0089960301_pi300-10000_pass1_cl_src6_src.reg
[Mon Jun 17 16:10:37 2013] Extracting stamp from image fullrun_mos1_xmm0089960301_pi300-10000_cl_sm2.00.img.gz, (234, 180) - (309, 255)
[Mon Jun 17 16:10:37 2013] XMMSAS bgd. selection expression = annulus(23533.114441, 18905.187302, 1087.500000, 2175.000000, X, Y)
[Mon Jun 17 16:10:37 2013] Writing fullrun_mos1_xmm0089960301_pi300-10000_pass1_cl_src6.gif
[Mon Jun 17 16:15:55 2013] Mean detx,y = (-6324.71, -7041.06) 
[Mon Jun 17 16:15:56 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 17 16:16:17 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 17 16:16:17 2013] Setting source spectrum file to fullrun_mos1_xmm0089960301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon Jun 17 16:16:17 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0089960301_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Mon Jun 17 16:29:54 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 17 16:29:54 2013] rmf not generated due to insufficient counts
[Mon Jun 17 17:14:58 2013] Updating aperture counts using extracted products
[Mon Jun 17 17:14:58 2013] Total counts from fullrun_mos1_xmm0089960301_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 387.00
[Mon Jun 17 17:14:58 2013] Total counts from fullrun_mos1_xmm0089960301_pi300-10000_pass1_cl_src6_bgd.pi.gz = 1734.00
[Mon Jun 17 17:14:58 2013] Got source and background scale factors 776200.000000, 7728907.000000
[Mon Jun 17 17:14:58 2013] User source parameters:
  Position = (271.1, 217.9) = 14 18 8.77 25 0 42.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 212.9 +/- 20.7
  Background aperture counts = 174.1
  Rate = 0.003 +/- 0.0003

[Mon Jun 17 17:14:58 2013] Updating counts from extracted products
[Mon Jun 17 17:14:58 2013] Set source signif. to 212.86/13.20 = 16.13
[Mon Jun 17 17:15:03 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 17 17:15:03 2013] Using photon index=1.80, rate=0.00269, arf fullrun_mos1_xmm0089960301_pi300-10000_pass1_cl_src6.arf
[Mon Jun 17 17:15:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 17 17:15:03 2013] Updating source flux to 4e-13
[Mon Jun 17 17:15:08 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 17 17:15:09 2013] xmm0089960301/analysis//spectral/fullrun_mos1_xmm0089960301_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete