[Mon Jun 17 09:54:28 2013] Detection parameters:
  Position = (315.5, 149.3) = 14 17 54.55 24 55 39.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 186.2 +/- 18.1
  Background counts = 53.3
  Rate = 0.002 +/- 0.0002

[Mon Jun 17 09:54:28 2013] Off-axis axis estimate = 10.89'
[Mon Jun 17 10:35:05 2013] Using EEF radius (= 11.87 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 10:35:05 2013] Initial guess for spatial extent in simple fitting = 11.87"
[Mon Jun 17 10:35:05 2013] source mask rpix=2.7, npix_max = 41, mask sum = 33, frac = 0.791
[Mon Jun 17 10:35:05 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 11.87"
[Mon Jun 17 11:41:55 2013] fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_src19.ximg exists
[Mon Jun 17 11:41:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_src19.csv
[Mon Jun 17 11:41:55 2013] fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_src19_1.ximg exists
[Mon Jun 17 11:41:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_src19.csv
[Mon Jun 17 11:41:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 11:41:55 2013] fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Mon Jun 17 11:41:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src19.csv
[Mon Jun 17 11:41:55 2013] fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Mon Jun 17 11:41:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src19.csv
[Mon Jun 17 11:41:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 12:52:20 2013] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 37 at 14.653387 pixels away
[Mon Jun 17 12:52:20 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 12:52:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 12:52:20 2013] Assessing source extent using major
[Mon Jun 17 12:52:20 2013] Source does appear to be extended
[Mon Jun 17 12:52:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 13:15:05 2013] Using EEF radius (= 11.87 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 13:15:05 2013] Initial guess for spatial extent in simple fitting = 11.87"
[Mon Jun 17 13:15:05 2013] source mask rpix=2.7, npix_max = 41, mask sum = 33, frac = 0.791
[Mon Jun 17 13:15:05 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 11.87"
[Mon Jun 17 14:15:34 2013] fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_src19.ximg exists
[Mon Jun 17 14:15:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_src19.csv
[Mon Jun 17 14:15:34 2013] fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_src19_1.ximg exists
[Mon Jun 17 14:15:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_src19.csv
[Mon Jun 17 14:15:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 14:15:35 2013] fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Mon Jun 17 14:15:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_tfrozen_src19.csv
[Mon Jun 17 14:15:35 2013] fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Mon Jun 17 14:15:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_tfrozen_src19.csv
[Mon Jun 17 14:15:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 15:23:23 2013] Spatial fit model total counts = 480.165000, observed total counts = 375.000000
[Mon Jun 17 15:23:23 2013] Poor agreement between spatial fit and data for source 37
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 17 15:23:23 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 15:23:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 15:23:23 2013] Assessing source extent using major
[Mon Jun 17 15:23:23 2013] Source does appear to be extended
[Mon Jun 17 15:23:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 16:10:37 2013] XMMSAS src. selection expression = ellipse(27400.692963, 12938.161621, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 17 16:10:37 2013] Writing source region out to fullrun_mos1_xmm0089960301_pi300-10000_pass1_cl_src37_src.reg
[Mon Jun 17 16:10:37 2013] Extracting stamp from image fullrun_mos1_xmm0089960301_pi300-10000_cl_sm2.00.img.gz, (278, 112) - (353, 187)
[Mon Jun 17 16:10:37 2013] XMMSAS bgd. selection expression = annulus(27400.692963, 12938.161621, 1087.500000, 2175.000000, X, Y)
[Mon Jun 17 16:10:37 2013] Writing fullrun_mos1_xmm0089960301_pi300-10000_pass1_cl_src37.gif
[Mon Jun 17 16:18:38 2013] Mean detx,y = (-13421.89, -6311.35) 
[Mon Jun 17 16:18:39 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 17 16:19:03 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 17 16:19:03 2013] Setting source spectrum file to fullrun_mos1_xmm0089960301_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Mon Jun 17 16:19:03 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0089960301_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Mon Jun 17 16:30:59 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 17 16:30:59 2013] rmf not generated due to insufficient counts
[Mon Jun 17 17:14:59 2013] Updating aperture counts using extracted products
[Mon Jun 17 17:14:59 2013] Total counts from fullrun_mos1_xmm0089960301_pi300-10000_pass1_cl_src37_src_b10.pi.gz = 314.00
[Mon Jun 17 17:15:00 2013] Total counts from fullrun_mos1_xmm0089960301_pi300-10000_pass1_cl_src37_bgd.pi.gz = 1548.00
[Mon Jun 17 17:15:00 2013] Got source and background scale factors 922036.000000, 7946959.000000
[Mon Jun 17 17:15:00 2013] User source parameters:
  Position = (315.5, 149.3) = 14 17 54.55 24 55 39.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 134.4 +/- 18.7
  Background aperture counts = 179.6
  Rate = 0.002 +/- 0.0002

[Mon Jun 17 17:15:00 2013] Updating counts from extracted products
[Mon Jun 17 17:15:00 2013] Set source signif. to 134.40/13.40 = 10.03
[Mon Jun 17 17:15:03 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 17 17:15:03 2013] Using photon index=1.80, rate=0.0017, arf fullrun_mos1_xmm0089960301_pi300-10000_pass1_cl_src37.arf
[Mon Jun 17 17:15:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 17 17:15:03 2013] Updating source flux to 5.8e-14
[Mon Jun 17 17:15:08 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 17 17:15:09 2013] xmm0089960301/analysis//spectral/fullrun_mos1_xmm0089960301_pi300-10000_pass1_cl_src37_pl.csv not found, spectral fit skipped or did not complete