[Mon Jun 17 09:54:28 2013] Detection parameters:
  Position = (470.0, 245.3) = 14 17 5.09 25 2 35.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 91.8 +/- 13.3
  Background counts = 47.1
  Rate = 0.001 +/- 0.0002

[Mon Jun 17 09:54:28 2013] Off-axis axis estimate = 13.02'
[Mon Jun 17 10:35:05 2013] Using EEF radius (= 12.94 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 10:35:05 2013] Initial guess for spatial extent in simple fitting = 12.94"
[Mon Jun 17 10:35:05 2013] source mask rpix=3.0, npix_max = 48, mask sum = 35, frac = 0.725
[Mon Jun 17 10:35:05 2013] Giving source the simple spatial ID 31 for pass 0, mean size = 12.94"
[Mon Jun 17 11:41:55 2013] fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_src31.ximg exists
[Mon Jun 17 11:41:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_src31.csv
[Mon Jun 17 11:41:55 2013] fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_src31_1.ximg exists
[Mon Jun 17 11:41:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_src31.csv
[Mon Jun 17 11:41:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 11:41:55 2013] fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Mon Jun 17 11:41:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src31.csv
[Mon Jun 17 11:41:55 2013] fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Mon Jun 17 11:41:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src31.csv
[Mon Jun 17 11:41:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 12:52:20 2013] Spatial fit model total counts = 427.355000, observed total counts = 310.000000
[Mon Jun 17 12:52:20 2013] Poor agreement between spatial fit and data for source 30
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 17 12:52:20 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 12:52:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 12:52:20 2013] Assessing source extent using major
[Mon Jun 17 12:52:20 2013] Source does appear to be extended
[Mon Jun 17 12:52:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 13:15:05 2013] Using EEF radius (= 12.94 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 13:15:05 2013] Initial guess for spatial extent in simple fitting = 12.94"
[Mon Jun 17 13:15:05 2013] source mask rpix=3.0, npix_max = 48, mask sum = 35, frac = 0.725
[Mon Jun 17 13:15:05 2013] Giving source the simple spatial ID 31 for pass 1, mean size = 12.94"
[Mon Jun 17 14:15:34 2013] fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_src31.ximg exists
[Mon Jun 17 14:15:34 2013] fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_src31_1.ximg exists
[Mon Jun 17 14:15:34 2013] Fit fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_src31 appears to have run properly
[Mon Jun 17 14:15:35 2013] fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Mon Jun 17 14:15:35 2013] fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Mon Jun 17 14:15:35 2013] Fit fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Mon Jun 17 15:23:23 2013] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 17.324073 pixels away
[Mon Jun 17 15:23:23 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 15:23:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 15:23:23 2013] Assessing source extent using major
[Mon Jun 17 15:23:23 2013] Source does appear to be extended
[Mon Jun 17 15:23:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 16:10:38 2013] XMMSAS src. selection expression = ellipse(40842.665558, 21292.989227, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 17 16:10:38 2013] Writing source region out to fullrun_mos1_xmm0089960301_pi300-10000_pass1_cl_src30_src.reg
[Mon Jun 17 16:10:38 2013] Extracting stamp from image fullrun_mos1_xmm0089960301_pi300-10000_cl_sm2.00.img.gz, (433, 208) - (508, 283)
[Mon Jun 17 16:10:38 2013] XMMSAS bgd. selection expression = annulus(40842.665558, 21292.989227, 1087.500000, 2175.000000, X, Y)
[Mon Jun 17 16:10:38 2013] Writing fullrun_mos1_xmm0089960301_pi300-10000_pass1_cl_src30.gif
[Mon Jun 17 16:23:00 2013] Mean detx,y = (-12636.05, 9378.56) 
[Mon Jun 17 16:23:01 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 17 16:23:20 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 17 16:23:20 2013] Setting source spectrum file to fullrun_mos1_xmm0089960301_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Mon Jun 17 16:23:20 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0089960301_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Mon Jun 17 16:32:34 2013] Not generating rmf since there are only 91 counts
[Mon Jun 17 16:32:34 2013] rmf not generated due to insufficient counts
[Mon Jun 17 17:15:01 2013] Updating aperture counts using extracted products
[Mon Jun 17 17:15:01 2013] Total counts from fullrun_mos1_xmm0089960301_pi300-10000_pass1_cl_src30_src_b10.pi.gz = 193.00
[Mon Jun 17 17:15:01 2013] Total counts from fullrun_mos1_xmm0089960301_pi300-10000_pass1_cl_src30_bgd.pi.gz = 950.00
[Mon Jun 17 17:15:02 2013] Got source and background scale factors 740612.000000, 4809954.000000
[Mon Jun 17 17:15:02 2013] User source parameters:
  Position = (470.0, 245.3) = 14 17 5.09 25 2 35.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 46.7 +/- 14.9
  Background aperture counts = 146.3
  Rate = 0.0006 +/- 0.0002

[Mon Jun 17 17:15:02 2013] Updating counts from extracted products
[Mon Jun 17 17:15:02 2013] Set source signif. to 46.72/12.09 = 3.86
[Mon Jun 17 17:15:03 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 17 17:15:03 2013] Using photon index=1.80, rate=0.00059, arf fullrun_mos1_xmm0089960301_pi300-10000_pass1_cl_src30.arf
[Mon Jun 17 17:15:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 17 17:15:03 2013] Updating source flux to 1.7e-14
[Mon Jun 17 17:15:08 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 17 17:15:09 2013] xmm0089960301/analysis//spectral/fullrun_mos1_xmm0089960301_pi300-10000_pass1_cl_src30_pl.csv not found, spectral fit skipped or did not complete