[Mon Jun 17 09:54:27 2013] Detection parameters:
  Position = (203.0, 359.0) = 14 18 30.59 25 10 53.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1131.7 +/- 43.3
  Background counts = 84.0
  Rate = 0.02 +/- 0.0009

[Mon Jun 17 09:54:28 2013] Off-axis axis estimate = 8.20'
[Mon Jun 17 10:35:05 2013] Using EEF radius (= 10.53 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 10:35:05 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 17 10:35:05 2013] Initial guess for spatial extent in simple fitting = 10.53"
[Mon Jun 17 10:35:05 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.056
[Mon Jun 17 10:35:05 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 10.53"
[Mon Jun 17 11:41:55 2013] fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jun 17 11:41:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_src1.csv
[Mon Jun 17 11:41:55 2013] fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jun 17 11:41:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_src1.csv
[Mon Jun 17 11:41:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 11:41:55 2013] fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jun 17 11:41:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jun 17 11:41:55 2013] fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jun 17 11:41:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jun 17 11:41:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 12:52:20 2013] Spatial fit model total counts = 4540.050000, observed total counts = 4060.000000
[Mon Jun 17 12:52:20 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 17 12:52:20 2013] Spatial fit model total counts = 1143.080000, observed total counts = 964.000000
[Mon Jun 17 12:52:20 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 17 12:52:20 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 12:52:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 12:52:20 2013] Assessing source extent using major
[Mon Jun 17 12:52:20 2013] Source does appear to be extended
[Mon Jun 17 12:52:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 13:15:05 2013] Using EEF radius (= 10.53 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 13:15:05 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 17 13:15:05 2013] Initial guess for spatial extent in simple fitting = 10.53"
[Mon Jun 17 13:15:05 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.056
[Mon Jun 17 13:15:05 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 10.53"
[Mon Jun 17 14:15:34 2013] fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jun 17 14:15:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_src1.csv
[Mon Jun 17 14:15:34 2013] fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jun 17 14:15:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_src1.csv
[Mon Jun 17 14:15:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 14:15:34 2013] fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jun 17 14:15:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Jun 17 14:15:34 2013] fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jun 17 14:15:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Jun 17 14:15:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 15:23:23 2013] Warning, spatial fit 1 centroid is now closest to src. 23
[Mon Jun 17 15:23:23 2013] Spatial fit model total counts = 1143.080000, observed total counts = 964.000000
[Mon Jun 17 15:23:23 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 17 15:23:23 2013] Source 3 is offset by 7.783154 and -3.193933 pixels which is larger than
2 X fitted extent = 5.482667 x 5.482667, not incorporating fit results
[Mon Jun 17 15:23:23 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 15:23:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 15:23:23 2013] Assessing source extent using major
[Mon Jun 17 15:23:23 2013] Source does appear to be extended
[Mon Jun 17 15:23:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 16:10:37 2013] Counts = 1131.695679, rescaling region sizes by 2.000000
[Mon Jun 17 16:10:37 2013] XMMSAS src. selection expression = ellipse(17611.646408, 31187.330261, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Jun 17 16:10:37 2013] Writing source region out to fullrun_mos1_xmm0089960301_pi300-10000_pass1_cl_src3_src.reg
[Mon Jun 17 16:10:37 2013] Extracting stamp from image fullrun_mos1_xmm0089960301_pi300-10000_cl_sm2.00.img.gz, (128, 284) - (278, 434)
[Mon Jun 17 16:10:37 2013] XMMSAS bgd. selection expression = annulus(17611.646408, 31187.330261, 4350.000000, 8700.000000, X, Y) && !ellipse(17576.873489, 33021.281128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10222.827980, 29870.438385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14400.268997, 32430.972534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14316.403259, 26810.153381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17207.196503, 32579.964813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18659.997500, 32667.790200, 458.251213, 458.251213, 0.000000, X, Y) && !ellipse(16282.411301, 30723.515228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16384.818180, 32594.522600, 507.050415, 180.155205, 289.628700, X, Y) && !ellipse(16159.407776, 38445.004181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16020.046616, 31186.560303, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16885.965836, 33386.623779, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 17 16:10:37 2013] Writing fullrun_mos1_xmm0089960301_pi300-10000_pass1_cl_src3.gif
[Mon Jun 17 16:10:44 2013] Mean detx,y = (7441.21, -5987.78) 
[Mon Jun 17 16:10:45 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 17 16:12:52 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 17 16:12:52 2013] Setting source spectrum file to fullrun_mos1_xmm0089960301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Jun 17 16:12:52 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0089960301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon Jun 17 16:25:11 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 17 16:25:11 2013] rmf not generated due to insufficient counts
[Mon Jun 17 17:14:56 2013] Updating aperture counts using extracted products
[Mon Jun 17 17:14:56 2013] Total counts from fullrun_mos1_xmm0089960301_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 5068.00
[Mon Jun 17 17:14:57 2013] Total counts from fullrun_mos1_xmm0089960301_pi300-10000_pass1_cl_src3_bgd.pi.gz = 23962.00
[Mon Jun 17 17:14:57 2013] Got source and background scale factors 3747216.000000, 109615353.000000
[Mon Jun 17 17:14:57 2013] User source parameters:
  Position = (203.0, 359.0) = 14 18 30.59 25 10 53.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 4248.9 +/- 72.2
  Background aperture counts = 819.1
  Rate = 0.05 +/- 0.0009

[Mon Jun 17 17:14:57 2013] Updating counts from extracted products
[Mon Jun 17 17:14:57 2013] Set source signif. to 4248.86/28.62 = 148.45
[Mon Jun 17 17:15:02 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 17 17:15:02 2013] Using photon index=1.80, rate=0.0536, arf fullrun_mos1_xmm0089960301_pi300-10000_pass1_cl_src3.arf
[Mon Jun 17 17:15:02 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 17 17:15:02 2013] Updating source flux to 8.6e-13
[Mon Jun 17 17:15:08 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 17 17:15:09 2013] xmm0089960301/analysis//spectral/fullrun_mos1_xmm0089960301_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete