[Mon Jun 17 09:54:27 2013] Detection parameters:
  Position = (303.7, 479.6) = 14 17 58.32 25 19 39.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 122.4 +/- 16.5
  Background counts = 61.7
  Rate = 0.001 +/- 0.0002

[Mon Jun 17 09:54:28 2013] Off-axis axis estimate = 13.14'
[Mon Jun 17 10:35:05 2013] Using EEF radius (= 13.00 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 10:35:05 2013] Initial guess for spatial extent in simple fitting = 13.00"
[Mon Jun 17 10:35:05 2013] source mask rpix=3.0, npix_max = 48, mask sum = 38, frac = 0.781
[Mon Jun 17 10:35:05 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 13.00"
[Mon Jun 17 11:41:55 2013] fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_src26.ximg exists
[Mon Jun 17 11:41:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_src26.csv
[Mon Jun 17 11:41:55 2013] fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_src26_1.ximg exists
[Mon Jun 17 11:41:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_src26.csv
[Mon Jun 17 11:41:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 11:41:55 2013] fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Mon Jun 17 11:41:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src26.csv
[Mon Jun 17 11:41:55 2013] fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Mon Jun 17 11:41:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src26.csv
[Mon Jun 17 11:41:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0089960301_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 12:52:20 2013] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 16.162801 pixels away
[Mon Jun 17 12:52:20 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 12:52:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 12:52:20 2013] Assessing source extent using major
[Mon Jun 17 12:52:20 2013] Source does appear to be extended
[Mon Jun 17 12:52:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 13:15:05 2013] Using EEF radius (= 13.00 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 13:15:05 2013] Initial guess for spatial extent in simple fitting = 13.00"
[Mon Jun 17 13:15:05 2013] source mask rpix=3.0, npix_max = 48, mask sum = 38, frac = 0.781
[Mon Jun 17 13:15:05 2013] Giving source the simple spatial ID 26 for pass 1, mean size = 13.00"
[Mon Jun 17 14:15:34 2013] fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_src26.ximg exists
[Mon Jun 17 14:15:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_src26.csv
[Mon Jun 17 14:15:34 2013] fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_src26_1.ximg exists
[Mon Jun 17 14:15:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_src26.csv
[Mon Jun 17 14:15:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 14:15:35 2013] fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Mon Jun 17 14:15:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_tfrozen_src26.csv
[Mon Jun 17 14:15:35 2013] fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Mon Jun 17 14:15:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_tfrozen_src26.csv
[Mon Jun 17 14:15:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0089960301_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 15:23:23 2013] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 17.651618 pixels away
[Mon Jun 17 15:23:23 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 15:23:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 15:23:23 2013] Assessing source extent using major
[Mon Jun 17 15:23:23 2013] Source does appear to be extended
[Mon Jun 17 15:23:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 16:10:38 2013] XMMSAS src. selection expression = ellipse(26372.893951, 41680.295441, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 17 16:10:38 2013] Writing source region out to fullrun_mos1_xmm0089960301_pi300-10000_pass1_cl_src10_src.reg
[Mon Jun 17 16:10:38 2013] Extracting stamp from image fullrun_mos1_xmm0089960301_pi300-10000_cl_sm2.00.img.gz, (266, 442) - (341, 517)
[Mon Jun 17 16:10:38 2013] XMMSAS bgd. selection expression = annulus(26372.893951, 41680.295441, 1087.500000, 2175.000000, X, Y) && !ellipse(29401.387634, 39543.198639, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 17 16:10:38 2013] Writing fullrun_mos1_xmm0089960301_pi300-10000_pass1_cl_src10.gif
[Mon Jun 17 16:21:22 2013] Mean detx,y = (12137.65, 6856.13) 
[Mon Jun 17 16:21:23 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 17 16:21:41 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 17 16:21:41 2013] Setting source spectrum file to fullrun_mos1_xmm0089960301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon Jun 17 16:21:41 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0089960301_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Mon Jun 17 16:31:56 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 17 16:31:56 2013] rmf not generated due to insufficient counts
[Mon Jun 17 17:15:01 2013] Updating aperture counts using extracted products
[Mon Jun 17 17:15:01 2013] Total counts from fullrun_mos1_xmm0089960301_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 327.00
[Mon Jun 17 17:15:01 2013] Total counts from fullrun_mos1_xmm0089960301_pi300-10000_pass1_cl_src10_bgd.pi.gz = 1736.00
[Mon Jun 17 17:15:01 2013] Got source and background scale factors 1063816.000000, 8570477.000000
[Mon Jun 17 17:15:01 2013] User source parameters:
  Position = (303.7, 479.6) = 14 17 58.32 25 19 39.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 111.5 +/- 19.1
  Background aperture counts = 215.5
  Rate = 0.001 +/- 0.0002

[Mon Jun 17 17:15:01 2013] Updating counts from extracted products
[Mon Jun 17 17:15:01 2013] Set source signif. to 111.52/14.68 = 7.60
[Mon Jun 17 17:15:03 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 17 17:15:03 2013] Using photon index=1.80, rate=0.00141, arf fullrun_mos1_xmm0089960301_pi300-10000_pass1_cl_src10.arf
[Mon Jun 17 17:15:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 17 17:15:03 2013] Updating source flux to 3.2e-14
[Mon Jun 17 17:15:08 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 17 17:15:09 2013] xmm0089960301/analysis//spectral/fullrun_mos1_xmm0089960301_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete