[Wed Jun 13 10:07:21 2012] Detection parameters:
  Position = (284.4, 187.8) = 19 37 9.95 7 24 55.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 32.3 +/- 7.3
  Background counts = 2.4
  Rate = 0.007 +/- 0.001

[Wed Jun 13 10:07:22 2012] Off-axis axis estimate = 8.08'
[Wed Jun 13 10:26:09 2012] Using EEF radius (= 10.47 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 10:26:09 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 13 10:26:09 2012] Initial guess for spatial extent in simple fitting = 10.47"
[Wed Jun 13 10:26:09 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.888
[Wed Jun 13 10:26:09 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.47"
[Wed Jun 13 10:31:59 2012] fullrun_mos2_xmm0089940801_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jun 13 10:31:59 2012] fullrun_mos2_xmm0089940801_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jun 13 10:31:59 2012] Fit fullrun_mos2_xmm0089940801_pi300-10000_cl_pass0_src1 appears to have run properly
[Wed Jun 13 10:31:59 2012] fullrun_mos2_xmm0089940801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jun 13 10:31:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940801_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Jun 13 10:31:59 2012] fullrun_mos2_xmm0089940801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jun 13 10:31:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940801_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Jun 13 10:31:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0089940801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0089940801_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 10:32:03 2012] Spatial fit model total counts = 56.746200, observed total counts = 58.000000
[Wed Jun 13 10:32:03 2012] Offset between fit and detection position for source 2 = 0.685474 pixels
[Wed Jun 13 10:32:03 2012] 57.837800 total counts/ 27.318800 bgd. counts: snr = 5.839014
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.685474 pixels
  Position = (285.1, 188.0) = 19 37 9.76 7 24 56.3
  Extent = 8.2 (5.2-12.0)" x 7.2 (4.5-11.1)", rotation angle = -0
  Source counts = 30.5 +/- 7.6
  Background counts = 27.3
  Rate = 0.004 +/- 0.0009
[Wed Jun 13 10:32:03 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 10:32:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 10:32:03 2012] Assessing source extent using major axis lower bound
[Wed Jun 13 10:32:03 2012] Source does appear to be extended
[Wed Jun 13 10:32:03 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.47
[Wed Jun 13 10:45:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 13 10:45:47 2012] Initial guess for spatial extent in simple fitting = 7.68"
[Wed Jun 13 10:45:47 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.779
[Wed Jun 13 10:45:47 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.68"
[Wed Jun 13 10:49:58 2012] fullrun_mos2_xmm0089940801_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jun 13 10:49:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940801_pi300-10000_cl_pass1_src1.csv
[Wed Jun 13 10:49:58 2012] fullrun_mos2_xmm0089940801_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jun 13 10:49:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940801_pi300-10000_cl_pass1_src1.csv
[Wed Jun 13 10:49:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0089940801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0089940801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 10:49:58 2012] fullrun_mos2_xmm0089940801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jun 13 10:49:58 2012] fullrun_mos2_xmm0089940801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jun 13 10:49:58 2012] Fit fullrun_mos2_xmm0089940801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jun 13 10:50:01 2012] Spatial fit model total counts = 44.535500, observed total counts = 45.000000
[Wed Jun 13 10:50:01 2012] Offset between fit and detection position for source 2 = 0.081224 pixels
[Wed Jun 13 10:50:01 2012] 45.388300 total counts/ 10.774400 bgd. counts: snr = 10.545180
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.081224 pixels
  Position = (285.1, 188.0) = 19 37 9.75 7 24 56.7
  Extent = 8.7 (5.5-10.8)", rotation angle = 0
  Source counts = 34.6 +/- 6.7
  Background counts = 10.8
  Rate = 0.004 +/- 0.0008
[Wed Jun 13 10:50:01 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 10:50:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 10:50:01 2012] Assessing source extent using major axis lower bound
[Wed Jun 13 10:50:01 2012] Source does appear to be extended
[Wed Jun 13 10:50:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 10:55:28 2012] XMMSAS src. selection expression = ellipse(24758.744960, 16310.903000, 520.985550, 520.985550, 0.000000, X, Y)
[Wed Jun 13 10:55:28 2012] Writing source region out to fullrun_mos2_xmm0089940801_pi300-10000_pass1_cl_src2_src.reg
[Wed Jun 13 10:55:28 2012] Extracting stamp from image fullrun_mos2_xmm0089940801_pi300-10000_cl_sm2.00.img.gz, (255, 158) - (315, 218)
[Wed Jun 13 10:55:28 2012] XMMSAS bgd. selection expression = annulus(24758.744960, 16310.903000, 868.309250, 1736.618499, X, Y)
[Wed Jun 13 10:55:28 2012] Writing fullrun_mos2_xmm0089940801_pi300-10000_pass1_cl_src2.gif
[Wed Jun 13 10:55:30 2012] Mean detx,y = (613.42, -11254.18) 
[Wed Jun 13 10:55:31 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 13 10:55:40 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 13 10:55:41 2012] Setting source spectrum file to fullrun_mos2_xmm0089940801_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jun 13 10:55:41 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0089940801_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Jun 13 10:56:08 2012] Not generating rmf since there are only 34 counts
[Wed Jun 13 10:56:08 2012] rmf not generated due to insufficient counts
[Wed Jun 13 10:56:36 2012] Updating aperture counts using extracted products
[Wed Jun 13 10:56:36 2012] Error reading totcts from fullrun_mos2_xmm0089940801_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jun 13 10:56:36 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 10:56:36 2012] Using photon index=1.80, rate=0.00399, arf fullrun_mos2_xmm0089940801_pi300-10000_pass1_cl_src2.arf
[Wed Jun 13 10:56:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 10:56:36 2012] Updating source flux to 7.3e-14
[Wed Jun 13 10:56:37 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Jun 13 10:56:38 2012] xmm0089940801/analysis//spectral/fullrun_mos2_xmm0089940801_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete