[Fri May 17 01:16:59 2013] Detection parameters:
  Position = (292.9, 272.2) = 5 36 27.81 -6 25 36.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 226.4 +/- 21.5
  Background counts = 59.8
  Rate = 0.006 +/- 0.0006

[Fri May 17 01:17:00 2013] Off-axis axis estimate = 1.94'
[Fri May 17 01:23:50 2013] Using EEF radius (= 7.40 ")to estimate initial spatial extent for simple fitting
[Fri May 17 01:23:50 2013] Initial guess for spatial extent in simple fitting = 7.40"
[Fri May 17 01:23:50 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.826
[Fri May 17 01:23:50 2013] Giving source the simple spatial ID 72 for pass 0, mean size = 7.40"
[Fri May 17 06:47:02 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_src72.ximg exists
[Fri May 17 06:47:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_src72.csv
[Fri May 17 06:47:02 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_src72_1.ximg exists
[Fri May 17 06:47:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_src72.csv
[Fri May 17 06:47:02 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_src72_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 06:47:04 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src72.ximg exists
[Fri May 17 06:47:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src72.csv
[Fri May 17 06:47:04 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src72_1.ximg exists
[Fri May 17 06:47:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src72.csv
[Fri May 17 06:47:04 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src72_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 12:36:45 2013] Source 75 is offset by 6.714379 and 6.029717 pixels which is larger than
2 X fitted extent = 0.850529 x 0.850529, not incorporating fit results
[Fri May 17 12:36:45 2013] Vigneting correction estimate = 1.000000
[Fri May 17 12:36:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 12:36:45 2013] Assessing source extent using major
[Fri May 17 12:36:45 2013] Source does appear to be extended
[Fri May 17 12:36:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 12:37:41 2013] Using EEF radius (= 7.40 ")to estimate initial spatial extent for simple fitting
[Fri May 17 12:37:41 2013] Initial guess for spatial extent in simple fitting = 7.40"
[Fri May 17 12:37:41 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.826
[Fri May 17 12:37:41 2013] Giving source the simple spatial ID 70 for pass 1, mean size = 7.40"
[Fri May 17 16:16:13 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_src70.ximg exists
[Fri May 17 16:16:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_src70.csv
[Fri May 17 16:16:13 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_src70_1.ximg exists
[Fri May 17 16:16:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_src70.csv
[Fri May 17 16:16:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_src70_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 16:16:14 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src70.ximg exists
[Fri May 17 16:16:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src70.csv
[Fri May 17 16:16:14 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src70_1.ximg exists
[Fri May 17 16:16:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src70.csv
[Fri May 17 16:16:15 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src70_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 21:10:56 2013] Source 75 is offset by 6.714379 and 6.029717 pixels which is larger than
2 X fitted extent = 0.850529 x 0.850529, not incorporating fit results
[Fri May 17 21:10:56 2013] Vigneting correction estimate = 1.000000
[Fri May 17 21:10:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 21:10:56 2013] Assessing source extent using major
[Fri May 17 21:10:56 2013] Source does appear to be extended
[Fri May 17 21:10:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 21:11:47 2013] XMMSAS src. selection expression = ellipse(25434.680939, 23635.115356, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 17 21:11:47 2013] Writing source region out to fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src75_src.reg
[Fri May 17 21:11:47 2013] Extracting stamp from image fullrun_pn_xmm0089940301_pi300-10000_cl_sm2.00.img.gz, (255, 235) - (330, 310)
[Fri May 17 21:11:47 2013] XMMSAS bgd. selection expression = annulus(25434.680939, 23635.115356, 1087.500000, 2175.000000, X, Y) && !ellipse(27061.269800, 21971.533000, 475.852014, 434.347212, 10.094600, X, Y) && !ellipse(25480.604980, 26555.283844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27138.846008, 25150.614044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26205.329742, 24858.948456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26638.392000, 24706.122000, 724.859221, 313.955209, 48.306600, X, Y) && !ellipse(25744.288000, 24449.588000, 300.650409, 300.650409, 0.000000, X, Y) && !ellipse(26581.397860, 23822.345600, 406.513612, 336.529610, 21.705400, X, Y) && !ellipse(27235.701477, 23105.373291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25777.559400, 22611.001200, 458.191213, 458.191213, 0.000000, X, Y)
[Fri May 17 21:11:47 2013] Writing fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src75.gif
[Fri May 17 22:44:54 2013] Mean detx,y = (-1518.49, 3770.92) 
[Fri May 17 22:44:57 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 17 22:45:15 2013] Binned source spectrum to 10 counts/bin
[Fri May 17 22:45:15 2013] Setting source spectrum file to fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src75_src_b10.pi.gz
[Fri May 17 22:45:15 2013] Setting bgd. spectrum file to fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src75_bgd.pi.gz
[Sat May 18 00:13:43 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 18 00:13:43 2013] rmf not generated due to insufficient counts
[Sat May 18 05:46:29 2013] Updating aperture counts using extracted products
[Sat May 18 05:46:29 2013] Total counts from fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src75_src_b10.pi.gz = 617.00
[Sat May 18 05:46:29 2013] Total counts from fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src75_bgd.pi.gz = 1958.00
[Sat May 18 05:46:29 2013] Got source and background scale factors 1229192.000000, 6052659.000000
[Sat May 18 05:46:29 2013] User source parameters:
  Position = (292.9, 272.2) = 5 36 27.81 -6 25 36.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 219.4 +/- 25.9
  Background aperture counts = 397.6
  Rate = 0.005 +/- 0.0006

[Sat May 18 05:46:29 2013] Updating counts from extracted products
[Sat May 18 05:46:29 2013] Set source signif. to 219.36/19.94 = 11.00
[Sat May 18 05:46:41 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 18 05:46:41 2013] Using photon index=1.80, rate=0.00504, arf fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src75.arf
[Sat May 18 05:46:41 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 18 05:46:41 2013] Updating source flux to 2.1e-14
[Sat May 18 05:48:49 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 18 05:49:43 2013] xmm0089940301/analysis//spectral/fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src75_pl.csv not found, spectral fit skipped or did not complete