[Fri May 17 01:16:59 2013] Detection parameters:
  Position = (343.4, 271.4) = 5 36 13.08 -6 25 42.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 100.3 +/- 15.2
  Background counts = 65.0
  Rate = 0.003 +/- 0.0004

[Fri May 17 01:17:00 2013] Off-axis axis estimate = 3.80'
[Fri May 17 01:23:50 2013] Using EEF radius (= 8.33 ")to estimate initial spatial extent for simple fitting
[Fri May 17 01:23:50 2013] Initial guess for spatial extent in simple fitting = 8.33"
[Fri May 17 01:23:50 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.072
[Fri May 17 01:23:50 2013] Giving source the simple spatial ID 71 for pass 0, mean size = 8.33"
[Fri May 17 06:47:02 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_src71.ximg exists
[Fri May 17 06:47:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_src71.csv
[Fri May 17 06:47:02 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_src71_1.ximg exists
[Fri May 17 06:47:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_src71.csv
[Fri May 17 06:47:02 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_src71_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 06:47:04 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src71.ximg exists
[Fri May 17 06:47:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src71.csv
[Fri May 17 06:47:04 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src71_1.ximg exists
[Fri May 17 06:47:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src71.csv
[Fri May 17 06:47:04 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src71_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 12:36:45 2013] Warning: source 71 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 74 at 11.030842 pixels away
[Fri May 17 12:36:45 2013] Vigneting correction estimate = 1.000000
[Fri May 17 12:36:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 12:36:45 2013] Assessing source extent using major
[Fri May 17 12:36:45 2013] Source does appear to be extended
[Fri May 17 12:36:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 12:37:41 2013] Using EEF radius (= 8.33 ")to estimate initial spatial extent for simple fitting
[Fri May 17 12:37:41 2013] Initial guess for spatial extent in simple fitting = 8.33"
[Fri May 17 12:37:41 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.072
[Fri May 17 12:37:41 2013] Giving source the simple spatial ID 69 for pass 1, mean size = 8.33"
[Fri May 17 16:16:13 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_src69.ximg exists
[Fri May 17 16:16:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_src69.csv
[Fri May 17 16:16:13 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_src69_1.ximg exists
[Fri May 17 16:16:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_src69.csv
[Fri May 17 16:16:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_src69_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 16:16:14 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src69.ximg exists
[Fri May 17 16:16:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src69.csv
[Fri May 17 16:16:14 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src69_1.ximg exists
[Fri May 17 16:16:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src69.csv
[Fri May 17 16:16:14 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src69_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 21:10:56 2013] Spatial fit model total counts = 602.472000, observed total counts = 495.000000
[Fri May 17 21:10:56 2013] Poor agreement between spatial fit and data for source 74
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 17 21:10:56 2013] Vigneting correction estimate = 1.000000
[Fri May 17 21:10:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 21:10:56 2013] Assessing source extent using major
[Fri May 17 21:10:56 2013] Source does appear to be extended
[Fri May 17 21:10:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 21:11:47 2013] XMMSAS src. selection expression = ellipse(29826.165771, 23560.447968, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 17 21:11:47 2013] Writing source region out to fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src74_src.reg
[Fri May 17 21:11:47 2013] Extracting stamp from image fullrun_pn_xmm0089940301_pi300-10000_cl_sm2.00.img.gz, (306, 234) - (381, 309)
[Fri May 17 21:11:47 2013] XMMSAS bgd. selection expression = annulus(29826.165771, 23560.447968, 1087.500000, 2175.000000, X, Y) && !ellipse(31696.965790, 26056.058685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29879.128296, 26127.566589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27138.846008, 25150.614044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31270.013184, 24819.375244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32483.465118, 24386.401031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32207.230560, 23877.437225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28228.869820, 23311.182400, 341.590410, 341.590410, 0.000000, X, Y) && !ellipse(27235.701477, 23105.373291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29089.023700, 21581.003600, 533.967215, 298.439209, 347.972514, X, Y)
[Fri May 17 21:11:47 2013] Writing fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src74.gif
[Fri May 17 22:44:05 2013] Mean detx,y = (2725.12, 3865.00) 
[Fri May 17 22:44:09 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 17 22:44:35 2013] Binned source spectrum to 10 counts/bin
[Fri May 17 22:44:36 2013] Setting source spectrum file to fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src74_src_b10.pi.gz
[Fri May 17 22:44:36 2013] Setting bgd. spectrum file to fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src74_bgd.pi.gz
[Sat May 18 00:13:18 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 18 00:13:18 2013] rmf not generated due to insufficient counts
[Sat May 18 05:46:28 2013] Updating aperture counts using extracted products
[Sat May 18 05:46:28 2013] Total counts from fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src74_src_b10.pi.gz = 367.00
[Sat May 18 05:46:28 2013] Total counts from fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src74_bgd.pi.gz = 1957.00
[Sat May 18 05:46:29 2013] Got source and background scale factors 1116152.000000, 6950860.000000
[Sat May 18 05:46:29 2013] User source parameters:
  Position = (343.4, 271.4) = 5 36 13.08 -6 25 42.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 52.7 +/- 20.2
  Background aperture counts = 314.3
  Rate = 0.001 +/- 0.0005

[Sat May 18 05:46:29 2013] Updating counts from extracted products
[Sat May 18 05:46:29 2013] Set source signif. to 52.75/17.73 = 2.98
[Sat May 18 05:46:41 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 18 05:46:41 2013] Using photon index=1.80, rate=0.00121, arf fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src74.arf
[Sat May 18 05:46:41 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 18 05:46:41 2013] Updating source flux to 6.3e-15
[Sat May 18 05:48:49 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 18 05:49:43 2013] xmm0089940301/analysis//spectral/fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src74_pl.csv not found, spectral fit skipped or did not complete