[Fri May 17 01:16:58 2013] Detection parameters: Position = (344.0, 300.9) = 5 36 12.90 -6 23 34.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 939.4 +/- 36.8 Background counts = 73.7 Rate = 0.03 +/- 0.001 [Fri May 17 01:17:00 2013] Off-axis axis estimate = 3.31' [Fri May 17 01:23:50 2013] Using EEF radius (= 8.08 ")to estimate initial spatial extent for simple fitting [Fri May 17 01:23:50 2013] Initial guess for spatial extent in simple fitting = 8.08" [Fri May 17 01:23:50 2013] source mask rpix=1.9, npix_max = 22, mask sum = 12, frac = 0.540 [Fri May 17 01:23:50 2013] Giving source the simple spatial ID 60 for pass 0, mean size = 8.08" [Fri May 17 06:47:01 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_src60.ximg exists [Fri May 17 06:47:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_src60.csv [Fri May 17 06:47:01 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_src60_1.ximg exists [Fri May 17 06:47:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_src60.csv [Fri May 17 06:47:01 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_src60_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 17 06:47:03 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src60.ximg exists [Fri May 17 06:47:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src60.csv [Fri May 17 06:47:03 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src60_1.ximg exists [Fri May 17 06:47:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src60.csv [Fri May 17 06:47:03 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src60_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 17 12:36:45 2013] Warning: source 60 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 62 at 11.337385 pixels away [Fri May 17 12:36:45 2013] Vigneting correction estimate = 1.000000 [Fri May 17 12:36:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 17 12:36:45 2013] Assessing source extent using major [Fri May 17 12:36:45 2013] Source does appear to be extended [Fri May 17 12:36:45 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri May 17 12:37:41 2013] Using EEF radius (= 8.08 ")to estimate initial spatial extent for simple fitting [Fri May 17 12:37:41 2013] Initial guess for spatial extent in simple fitting = 8.08" [Fri May 17 12:37:41 2013] source mask rpix=1.9, npix_max = 22, mask sum = 12, frac = 0.540 [Fri May 17 12:37:41 2013] Giving source the simple spatial ID 58 for pass 1, mean size = 8.08" [Fri May 17 16:16:13 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_src58.ximg exists [Fri May 17 16:16:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_src58.csv [Fri May 17 16:16:13 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_src58_1.ximg exists [Fri May 17 16:16:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_src58.csv [Fri May 17 16:16:13 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_src58_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 17 16:16:14 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src58.ximg exists [Fri May 17 16:16:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src58.csv [Fri May 17 16:16:14 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src58_1.ximg exists [Fri May 17 16:16:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src58.csv [Fri May 17 16:16:14 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src58_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 17 21:10:56 2013] Spatial fit model total counts = 1472.600000, observed total counts = 1212.000000 [Fri May 17 21:10:56 2013] Poor agreement between spatial fit and data for source 62 It may help to tweak spatial fit manually Not incorporating fit results [Fri May 17 21:10:56 2013] Source 62 is offset by -6.998870 and 6.868926 pixels which is larger than 2 X fitted extent = 1.000676 x 1.000676, not incorporating fit results [Fri May 17 21:10:56 2013] Vigneting correction estimate = 1.000000 [Fri May 17 21:10:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 17 21:10:56 2013] Assessing source extent using major [Fri May 17 21:10:56 2013] Source does appear to be extended [Fri May 17 21:10:56 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri May 17 21:11:46 2013] XMMSAS src. selection expression = ellipse(29879.128296, 26127.566589, 652.500000, 652.500000, 0.000000, X, Y) [Fri May 17 21:11:46 2013] Writing source region out to fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src62_src.reg [Fri May 17 21:11:46 2013] Extracting stamp from image fullrun_pn_xmm0089940301_pi300-10000_cl_sm2.00.img.gz, (306, 263) - (381, 338) [Fri May 17 21:11:46 2013] XMMSAS bgd. selection expression = annulus(29879.128296, 26127.566589, 1087.500000, 2175.000000, X, Y) && !ellipse(27471.951294, 28067.230103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28090.859863, 27791.943390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31696.965790, 26056.058685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27138.846008, 25150.614044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31270.013184, 24819.375244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32483.465118, 24386.401031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32207.230560, 23877.437225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29826.165771, 23560.447968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27235.701477, 23105.373291, 870.000000, 870.000000, 0.000000, X, Y) [Fri May 17 21:11:46 2013] Writing fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src62.gif [Fri May 17 22:33:10 2013] Mean detx,y = (2837.26, 1334.31) [Fri May 17 22:33:14 2013] Setting backscal keywords in source and bgd. spectrum [Fri May 17 22:33:41 2013] Binned source spectrum to 10 counts/bin [Fri May 17 22:33:41 2013] Setting source spectrum file to fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src62_src_b10.pi.gz [Fri May 17 22:33:41 2013] Setting bgd. spectrum file to fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src62_bgd.pi.gz [Sat May 18 00:05:02 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sat May 18 00:05:02 2013] rmf not generated due to insufficient counts [Sat May 18 05:46:24 2013] Updating aperture counts using extracted products [Sat May 18 05:46:24 2013] Total counts from fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src62_src_b10.pi.gz = 1094.00 [Sat May 18 05:46:24 2013] Total counts from fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src62_bgd.pi.gz = 2075.00 [Sat May 18 05:46:24 2013] Got source and background scale factors 1033186.000000, 6419126.000000 [Sat May 18 05:46:24 2013] User source parameters: Position = (344.0, 300.9) = 5 36 12.90 -6 23 34.1 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 760.0 +/- 34.1 Background aperture counts = 334.0 Rate = 0.02 +/- 0.0008 [Sat May 18 05:46:24 2013] Updating counts from extracted products [Sat May 18 05:46:24 2013] Set source signif. to 760.02/18.28 = 41.59 [Sat May 18 05:46:40 2013] Calculating source flux in energy range 0.30-8.00 [Sat May 18 05:46:40 2013] Using photon index=1.80, rate=0.0175, arf fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src62.arf [Sat May 18 05:46:40 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat May 18 05:46:40 2013] Updating source flux to 6.6e-14 [Sat May 18 05:48:49 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sat May 18 05:49:43 2013] xmm0089940301/analysis//spectral/fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src62_pl.csv not found, spectral fit skipped or did not complete