[Fri May 17 01:16:56 2013] Detection parameters:
  Position = (389.4, 402.9) = 5 35 59.65 -6 16 7.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3334.0 +/- 77.3
  Background counts = 63.5
  Rate = 0.1 +/- 0.003

[Fri May 17 01:17:00 2013] Off-axis axis estimate = 10.04'
[Fri May 17 01:23:50 2013] Using EEF radius (= 11.45 ")to estimate initial spatial extent for simple fitting
[Fri May 17 01:23:50 2013] Initial guess for spatial extent in simple fitting = 11.45"
[Fri May 17 01:23:50 2013] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.070
[Fri May 17 01:23:50 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 11.45"
[Fri May 17 06:47:00 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_src6.ximg exists
[Fri May 17 06:47:00 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri May 17 06:47:00 2013] Fit fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_src6 appears to have run properly
[Fri May 17 06:47:02 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri May 17 06:47:02 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri May 17 06:47:02 2013] Fit fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Fri May 17 12:36:45 2013] Warning, spatial fit 6 centroid is now closest to src. 32
[Fri May 17 12:36:45 2013] Spatial fit model total counts = 5076.090000, observed total counts = 5071.000000
[Fri May 17 12:36:45 2013] Offset between fit and detection position for source 6 = 0.281327 pixels
[Fri May 17 12:36:45 2013] Warning, changing simple spatial fit ID from 6 to 30
[Fri May 17 12:36:45 2013] 5022.270000 total counts/ 2246.950000 bgd. counts: snr = 58.548579
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.281327 pixels
  Position = (389.3, 403.1) = 5 35 59.68 -6 16 8.9
  Extent = 7.4 (7.1-7.8)" x 6.0 (5.7-6.3)", rotation angle = 41 (34-50) degrees
  Source counts = 2775.3 +/- 70.9
  Background counts = 2246.9
  Rate = 0.06 +/- 0.002
[Fri May 17 12:36:45 2013] Vigneting correction estimate = 1.000000
[Fri May 17 12:36:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 12:36:45 2013] Assessing source extent using major axis lower bound
[Fri May 17 12:36:45 2013] Source does appear to be extended
[Fri May 17 12:36:45 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.14
[Fri May 17 12:37:41 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 17 12:37:41 2013] Initial guess for spatial extent in simple fitting = 6.70"
[Fri May 17 12:37:41 2013] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.962
[Fri May 17 12:37:41 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 6.70"
[Fri May 17 16:16:12 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_src6.ximg exists
[Fri May 17 16:16:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_src6.csv
[Fri May 17 16:16:12 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri May 17 16:16:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_src6.csv
[Fri May 17 16:16:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 16:16:14 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri May 17 16:16:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src6.csv
[Fri May 17 16:16:14 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri May 17 16:16:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src6.csv
[Fri May 17 16:16:14 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 21:10:56 2013] Warning, spatial fit 6 centroid is now closest to src. 31
[Fri May 17 21:10:56 2013] Spatial fit model total counts = 4721.330000, observed total counts = 5071.000000
[Fri May 17 21:10:56 2013] Offset between fit and detection position for source 6 = 0.139708 pixels
[Fri May 17 21:10:56 2013] Warning, changing simple spatial fit ID from 6 to 29
[Fri May 17 21:10:56 2013] 4666.080000 total counts/ 2600.780000 bgd. counts: snr = 40.497791
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.139708 pixels
  Position = (389.3, 403.2) = 5 35 59.70 -6 16 8.4
  Extent = 5.3 (5.1-5.4)", rotation angle = 0
  Source counts = 2065.3 +/- 68.3
  Background counts = 2600.8
  Rate = 0.05 +/- 0.002
[Fri May 17 21:10:56 2013] Vigneting correction estimate = 1.000000
[Fri May 17 21:10:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 21:10:56 2013] Assessing source extent using major axis lower bound
[Fri May 17 21:10:56 2013] Source does appear to be extended
[Fri May 17 21:10:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 21:11:44 2013] Counts = 2065.300000, rescaling region sizes by 2.000000
[Fri May 17 21:11:44 2013] XMMSAS src. selection expression = ellipse(33817.934000, 35032.976000, 634.016418, 634.016418, 0.000000, X, Y)
[Fri May 17 21:11:44 2013] Writing source region out to fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src6_src.reg
[Fri May 17 21:11:44 2013] Extracting stamp from image fullrun_pn_xmm0089940301_pi300-10000_cl_sm2.00.img.gz, (353, 367) - (426, 440)
[Fri May 17 21:11:44 2013] XMMSAS bgd. selection expression = annulus(33817.934000, 35032.976000, 2113.388061, 4226.776122, X, Y) && !ellipse(37227.187378, 33258.014160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33974.587600, 34586.207400, 510.517615, 363.205610, 41.408000, X, Y) && !ellipse(31782.555969, 37077.610992, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29243.375400, 33239.951200, 508.416015, 426.993612, 2.127380, X, Y) && !ellipse(30924.932000, 32055.938000, 363.709610, 363.709610, 0.000000, X, Y) && !ellipse(30641.283661, 30337.378387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37099.844208, 39815.086914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37835.016000, 39559.456000, 2217.944064, 394.041611, 20.949200, X, Y) && !ellipse(29373.477966, 38434.662842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34356.500671, 36558.868713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33432.407104, 35719.515717, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35030.812000, 36123.064000, 1895.032055, 1895.032055, 0.000000, X, Y) && !ellipse(30963.713074, 33777.929962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31684.821686, 31699.562408, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32013.212000, 30919.914000, 1573.200045, 1221.624035, 285.039000, X, Y)
[Fri May 17 21:11:44 2013] Writing fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src6.gif
[Fri May 17 21:21:07 2013] Mean detx,y = (7067.57, -7259.38) 
[Fri May 17 21:21:11 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 17 21:21:45 2013] Binned source spectrum to 10 counts/bin
[Fri May 17 21:21:45 2013] Setting source spectrum file to fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri May 17 21:21:45 2013] Setting bgd. spectrum file to fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sat May 18 05:46:01 2013] Updating aperture counts using extracted products
[Sat May 18 05:46:01 2013] Total counts from fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 9716.00
[Sat May 18 05:46:01 2013] Total counts from fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src6_bgd.pi.gz = 7553.00
[Sat May 18 05:46:01 2013] Got source and background scale factors 1267200.000000, 26434132.000000
[Sat May 18 05:46:01 2013] User source parameters:
  Position = (389.3, 403.2) = 5 35 59.70 -6 16 8.4
  Extent = 5.3 (5.1-5.4)", rotation angle = 0
  Source aperture counts = 9353.9 +/- 99.6
  Background aperture counts = 362.1
  Rate = 0.2 +/- 0.002

[Sat May 18 05:46:36 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 18 05:46:36 2013] Using photon index=1.80, rate=0.0475, arf fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src6.arf
[Sat May 18 05:46:36 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 18 05:46:36 2013] Updating source flux to 2.8e-13
[Sat May 18 05:49:43 2013] xmm0089940301/analysis//spectral/fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete