[Fri May 17 01:16:58 2013] Detection parameters: Position = (364.9, 300.1) = 5 36 6.81 -6 23 36.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 765.3 +/- 34.2 Background counts = 71.4 Rate = 0.03 +/- 0.001 [Fri May 17 01:17:00 2013] Off-axis axis estimate = 4.82' [Fri May 17 01:23:50 2013] Using EEF radius (= 8.84 ")to estimate initial spatial extent for simple fitting [Fri May 17 01:23:50 2013] Initial guess for spatial extent in simple fitting = 8.84" [Fri May 17 01:23:50 2013] source mask rpix=2.0, npix_max = 25, mask sum = 18, frac = 0.702 [Fri May 17 01:23:50 2013] Giving source the simple spatial ID 57 for pass 0, mean size = 8.84" [Fri May 17 06:47:01 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_src57.ximg exists [Fri May 17 06:47:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_src57.csv [Fri May 17 06:47:01 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_src57_1.ximg exists [Fri May 17 06:47:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_src57.csv [Fri May 17 06:47:01 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_src57_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 17 06:47:03 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src57.ximg exists [Fri May 17 06:47:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src57.csv [Fri May 17 06:47:03 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src57_1.ximg exists [Fri May 17 06:47:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src57.csv [Fri May 17 06:47:03 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src57_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 17 12:36:45 2013] Spatial fit model total counts = 1399.510000, observed total counts = 1110.000000 [Fri May 17 12:36:45 2013] Poor agreement between spatial fit and data for source 59 It may help to tweak spatial fit manually Not incorporating fit results [Fri May 17 12:36:45 2013] Vigneting correction estimate = 1.000000 [Fri May 17 12:36:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 17 12:36:45 2013] Assessing source extent using major [Fri May 17 12:36:45 2013] Source does appear to be extended [Fri May 17 12:36:45 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri May 17 12:37:41 2013] Using EEF radius (= 8.84 ")to estimate initial spatial extent for simple fitting [Fri May 17 12:37:41 2013] Initial guess for spatial extent in simple fitting = 8.84" [Fri May 17 12:37:41 2013] source mask rpix=2.0, npix_max = 25, mask sum = 18, frac = 0.702 [Fri May 17 12:37:41 2013] Giving source the simple spatial ID 55 for pass 1, mean size = 8.84" [Fri May 17 16:16:13 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_src55.ximg exists [Fri May 17 16:16:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_src55.csv [Fri May 17 16:16:13 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_src55_1.ximg exists [Fri May 17 16:16:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_src55.csv [Fri May 17 16:16:13 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_src55_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 17 16:16:14 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src55.ximg exists [Fri May 17 16:16:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src55.csv [Fri May 17 16:16:14 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src55_1.ximg exists [Fri May 17 16:16:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src55.csv [Fri May 17 16:16:14 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src55_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 17 21:10:56 2013] Spatial fit model total counts = 1397.130000, observed total counts = 1110.000000 [Fri May 17 21:10:56 2013] Poor agreement between spatial fit and data for source 59 It may help to tweak spatial fit manually Not incorporating fit results [Fri May 17 21:10:56 2013] Vigneting correction estimate = 1.000000 [Fri May 17 21:10:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 17 21:10:56 2013] Assessing source extent using major [Fri May 17 21:10:56 2013] Source does appear to be extended [Fri May 17 21:10:56 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri May 17 21:11:46 2013] XMMSAS src. selection expression = ellipse(31696.965790, 26056.058685, 652.500000, 652.500000, 0.000000, X, Y) [Fri May 17 21:11:46 2013] Writing source region out to fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src59_src.reg [Fri May 17 21:11:46 2013] Extracting stamp from image fullrun_pn_xmm0089940301_pi300-10000_cl_sm2.00.img.gz, (327, 263) - (402, 338) [Fri May 17 21:11:46 2013] XMMSAS bgd. selection expression = annulus(31696.965790, 26056.058685, 1087.500000, 2175.000000, X, Y) && !ellipse(34255.893646, 27731.525543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34404.808929, 25891.372528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33620.966094, 25862.856600, 397.536811, 397.536811, 0.000000, X, Y) && !ellipse(29879.128296, 26127.566589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31270.013184, 24819.375244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32483.465118, 24386.401031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32207.230560, 23877.437225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29826.165771, 23560.447968, 870.000000, 870.000000, 0.000000, X, Y) [Fri May 17 21:11:46 2013] Writing fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src59.gif [Fri May 17 22:31:07 2013] Mean detx,y = (4673.74, 1404.21) [Fri May 17 22:31:11 2013] Setting backscal keywords in source and bgd. spectrum [Fri May 17 22:31:27 2013] Binned source spectrum to 10 counts/bin [Fri May 17 22:31:27 2013] Setting source spectrum file to fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src59_src_b10.pi.gz [Fri May 17 22:31:27 2013] Setting bgd. spectrum file to fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src59_bgd.pi.gz [Sat May 18 00:04:30 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sat May 18 00:04:30 2013] rmf not generated due to insufficient counts [Sat May 18 05:46:22 2013] Updating aperture counts using extracted products [Sat May 18 05:46:22 2013] Total counts from fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src59_src_b10.pi.gz = 933.00 [Sat May 18 05:46:23 2013] Total counts from fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src59_bgd.pi.gz = 1653.00 [Sat May 18 05:46:23 2013] Got source and background scale factors 1040852.000000, 5075754.000000 [Sat May 18 05:46:23 2013] User source parameters: Position = (364.9, 300.1) = 5 36 6.81 -6 23 36.2 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 594.0 +/- 31.6 Background aperture counts = 339.0 Rate = 0.01 +/- 0.0007 [Sat May 18 05:46:23 2013] Updating counts from extracted products [Sat May 18 05:46:23 2013] Set source signif. to 594.03/18.41 = 32.26 [Sat May 18 05:46:40 2013] Calculating source flux in energy range 0.30-8.00 [Sat May 18 05:46:40 2013] Using photon index=1.80, rate=0.0137, arf fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src59.arf [Sat May 18 05:46:40 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat May 18 05:46:40 2013] Updating source flux to 6.7e-14 [Sat May 18 05:48:49 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sat May 18 05:49:43 2013] xmm0089940301/analysis//spectral/fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src59_pl.csv not found, spectral fit skipped or did not complete