[Fri May 17 01:16:58 2013] Detection parameters: Position = (293.4, 305.8) = 5 36 27.66 -6 23 12.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 378.2 +/- 25.9 Background counts = 64.3 Rate = 0.01 +/- 0.0007 [Fri May 17 01:17:00 2013] Off-axis axis estimate = 0.64' [Fri May 17 01:23:50 2013] Using EEF radius (= 6.75 ")to estimate initial spatial extent for simple fitting [Fri May 17 01:23:50 2013] Initial guess for spatial extent in simple fitting = 6.75" [Fri May 17 01:23:50 2013] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.950 [Fri May 17 01:23:50 2013] Giving source the simple spatial ID 56 for pass 0, mean size = 6.75" [Fri May 17 06:47:01 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_src56.ximg exists [Fri May 17 06:47:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_src56.csv [Fri May 17 06:47:01 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_src56_1.ximg exists [Fri May 17 06:47:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_src56.csv [Fri May 17 06:47:01 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_src56_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 17 06:47:03 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src56.ximg exists [Fri May 17 06:47:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src56.csv [Fri May 17 06:47:03 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src56_1.ximg exists [Fri May 17 06:47:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src56.csv [Fri May 17 06:47:03 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src56_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 17 12:36:45 2013] Spatial fit model total counts = 866.811000, observed total counts = 769.000000 [Fri May 17 12:36:45 2013] Poor agreement between spatial fit and data for source 58 It may help to tweak spatial fit manually Not incorporating fit results [Fri May 17 12:36:45 2013] Vigneting correction estimate = 1.000000 [Fri May 17 12:36:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 17 12:36:45 2013] Assessing source extent using major [Fri May 17 12:36:45 2013] Source does appear to be extended [Fri May 17 12:36:45 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri May 17 12:37:41 2013] Using EEF radius (= 6.75 ")to estimate initial spatial extent for simple fitting [Fri May 17 12:37:41 2013] Initial guess for spatial extent in simple fitting = 6.75" [Fri May 17 12:37:41 2013] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.950 [Fri May 17 12:37:41 2013] Giving source the simple spatial ID 54 for pass 1, mean size = 6.75" [Fri May 17 16:16:13 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_src54.ximg exists [Fri May 17 16:16:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_src54.csv [Fri May 17 16:16:13 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_src54_1.ximg exists [Fri May 17 16:16:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_src54.csv [Fri May 17 16:16:13 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_src54_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 17 16:16:14 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src54.ximg exists [Fri May 17 16:16:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src54.csv [Fri May 17 16:16:14 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists [Fri May 17 16:16:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src54.csv [Fri May 17 16:16:14 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src54_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 17 21:10:56 2013] Source 58 is offset by -5.769736 and 4.998343 pixels which is larger than 2 X fitted extent = 0.775968 x 0.775968, not incorporating fit results [Fri May 17 21:10:56 2013] Vigneting correction estimate = 1.000000 [Fri May 17 21:10:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 17 21:10:56 2013] Assessing source extent using major [Fri May 17 21:10:56 2013] Source does appear to be extended [Fri May 17 21:10:56 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri May 17 21:11:46 2013] XMMSAS src. selection expression = ellipse(25480.604980, 26555.283844, 652.500000, 652.500000, 0.000000, X, Y) [Fri May 17 21:11:46 2013] Writing source region out to fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src58_src.reg [Fri May 17 21:11:46 2013] Extracting stamp from image fullrun_pn_xmm0089940301_pi300-10000_cl_sm2.00.img.gz, (256, 268) - (331, 343) [Fri May 17 21:11:46 2013] XMMSAS bgd. selection expression = annulus(25480.604980, 26555.283844, 1087.500000, 2175.000000, X, Y) && !ellipse(27471.951294, 28067.230103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28090.859863, 27791.943390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26446.948200, 27514.685200, 408.304812, 408.304812, 0.000000, X, Y) && !ellipse(27138.846008, 25150.614044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26205.329742, 24858.948456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26638.392000, 24706.122000, 724.859221, 313.955209, 48.306600, X, Y) && !ellipse(25744.288000, 24449.588000, 300.650409, 300.650409, 0.000000, X, Y) && !ellipse(25434.680939, 23635.115356, 870.000000, 870.000000, 0.000000, X, Y) [Fri May 17 21:11:46 2013] Writing fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src58.gif [Fri May 17 22:30:12 2013] Mean detx,y = (-1481.29, 827.30) [Fri May 17 22:30:16 2013] Setting backscal keywords in source and bgd. spectrum [Fri May 17 22:30:46 2013] Binned source spectrum to 10 counts/bin [Fri May 17 22:30:46 2013] Setting source spectrum file to fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src58_src_b10.pi.gz [Fri May 17 22:30:46 2013] Setting bgd. spectrum file to fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src58_bgd.pi.gz [Sat May 18 00:04:18 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sat May 18 00:04:18 2013] rmf not generated due to insufficient counts [Sat May 18 05:46:22 2013] Updating aperture counts using extracted products [Sat May 18 05:46:22 2013] Total counts from fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src58_src_b10.pi.gz = 680.00 [Sat May 18 05:46:22 2013] Total counts from fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src58_bgd.pi.gz = 1956.00 [Sat May 18 05:46:22 2013] Got source and background scale factors 1303364.000000, 6861734.000000 [Sat May 18 05:46:22 2013] User source parameters: Position = (293.4, 305.8) = 5 36 27.66 -6 23 12.3 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 308.5 +/- 27.1 Background aperture counts = 371.5 Rate = 0.007 +/- 0.0006 [Sat May 18 05:46:22 2013] Updating counts from extracted products [Sat May 18 05:46:22 2013] Set source signif. to 308.46/19.28 = 16.00 [Sat May 18 05:46:40 2013] Calculating source flux in energy range 0.30-8.00 [Sat May 18 05:46:40 2013] Using photon index=1.80, rate=0.00709, arf fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src58.arf [Sat May 18 05:46:40 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat May 18 05:46:40 2013] Updating source flux to 2.7e-14 [Sat May 18 05:48:49 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sat May 18 05:49:43 2013] xmm0089940301/analysis//spectral/fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src58_pl.csv not found, spectral fit skipped or did not complete