[Fri May 17 01:16:58 2013] Detection parameters:
  Position = (325.2, 340.9) = 5 36 18.39 -6 20 39.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2208.4 +/- 57.2
  Background counts = 76.4
  Rate = 0.06 +/- 0.001

[Fri May 17 01:17:00 2013] Off-axis axis estimate = 3.64'
[Fri May 17 01:23:50 2013] Using EEF radius (= 8.25 ")to estimate initial spatial extent for simple fitting
[Fri May 17 01:23:50 2013] Initial guess for spatial extent in simple fitting = 8.25"
[Fri May 17 01:23:50 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.089
[Fri May 17 01:23:50 2013] Giving source the simple spatial ID 47 for pass 0, mean size = 8.25"
[Fri May 17 06:47:01 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_src47.ximg exists
[Fri May 17 06:47:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_src47.csv
[Fri May 17 06:47:01 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_src47_1.ximg exists
[Fri May 17 06:47:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_src47.csv
[Fri May 17 06:47:01 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 06:47:03 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Fri May 17 06:47:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src47.csv
[Fri May 17 06:47:03 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Fri May 17 06:47:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src47.csv
[Fri May 17 06:47:03 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 12:36:45 2013] Warning, spatial fit 47 centroid is now closest to src. 51
[Fri May 17 12:36:45 2013] Vigneting correction estimate = 1.000000
[Fri May 17 12:36:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 12:36:45 2013] Assessing source extent using major
[Fri May 17 12:36:45 2013] Source does appear to be extended
[Fri May 17 12:36:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 12:37:41 2013] Using EEF radius (= 8.25 ")to estimate initial spatial extent for simple fitting
[Fri May 17 12:37:41 2013] Initial guess for spatial extent in simple fitting = 8.25"
[Fri May 17 12:37:41 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.089
[Fri May 17 12:37:41 2013] Giving source the simple spatial ID 46 for pass 1, mean size = 8.25"
[Fri May 17 16:16:13 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_src46.ximg exists
[Fri May 17 16:16:13 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_src46_1.ximg exists
[Fri May 17 16:16:13 2013] Fit fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_src46 appears to have run properly
[Fri May 17 16:16:14 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src46.ximg exists
[Fri May 17 16:16:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src46.csv
[Fri May 17 16:16:14 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src46_1.ximg exists
[Fri May 17 16:16:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src46.csv
[Fri May 17 16:16:14 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 21:10:56 2013] Spatial fit model total counts = 2516.770000, observed total counts = 2352.000000
[Fri May 17 21:10:56 2013] Offset between fit and detection position for source 49 = 0.199790 pixels
[Fri May 17 21:10:56 2013] 2500.097000 total counts/ 980.687000 bgd. counts: snr = 48.518769
Spatial fit parameters:
  Offset between fit and detection position for source 49 = 0.199790 pixels
  Position = (325.0, 340.8) = 5 36 18.45 -6 20 39.9
  Extent = 5.6 (5.2-5.9)" x 5.1 (4.8-5.4)", rotation angle = 357 (350-0) degrees
  Source counts = 1519.4 +/- 50.0
  Background counts = 980.7
  Rate = 0.03 +/- 0.001
[Fri May 17 21:10:56 2013] Vigneting correction estimate = 1.000000
[Fri May 17 21:10:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 21:10:56 2013] Assessing source extent using major axis lower bound
[Fri May 17 21:10:56 2013] Source does appear to be extended
[Fri May 17 21:10:56 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.97
[Fri May 17 21:11:46 2013] Counts = 1519.410000, rescaling region sizes by 2.000000
[Fri May 17 21:11:46 2013] XMMSAS src. selection expression = ellipse(28225.831012, 29602.790200, 667.170019, 612.494418, 356.731839, X, Y)
[Fri May 17 21:11:46 2013] Writing source region out to fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src49_src.reg
[Fri May 17 21:11:46 2013] Extracting stamp from image fullrun_pn_xmm0089940301_pi300-10000_cl_sm2.00.img.gz, (287, 302) - (363, 379)
[Fri May 17 21:11:46 2013] XMMSAS bgd. selection expression = annulus(28225.831012, 29602.790200, 2223.900064, 4447.800128, X, Y) && !ellipse(26291.275600, 33320.464200, 478.304814, 398.382411, 344.703224, X, Y) && !ellipse(29243.375400, 33239.951200, 508.416015, 426.993612, 2.127380, X, Y) && !ellipse(30924.932000, 32055.938000, 363.709610, 363.709610, 0.000000, X, Y) && !ellipse(30641.283661, 30337.378387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30963.713074, 33777.929962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28640.424377, 33431.342438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27670.789093, 33593.439941, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23377.657166, 32966.592834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31684.821686, 31699.562408, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26811.681600, 30848.421600, 423.092012, 423.092012, 0.000000, X, Y) && !ellipse(32013.212000, 30919.914000, 1573.200045, 1221.624035, 285.039000, X, Y) && !ellipse(32496.258860, 29467.961200, 451.584813, 451.584813, 0.000000, X, Y) && !ellipse(27471.951294, 28067.230103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28090.859863, 27791.943390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26446.948200, 27514.685200, 408.304812, 408.304812, 0.000000, X, Y) && !ellipse(25480.604980, 26555.283844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31696.965790, 26056.058685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29879.128296, 26127.566589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27138.846008, 25150.614044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26205.329742, 24858.948456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31270.013184, 24819.375244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32483.465118, 24386.401031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26638.392000, 24706.122000, 724.859221, 313.955209, 48.306600, X, Y)
[Fri May 17 21:11:46 2013] Writing fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src49.gif
[Fri May 17 22:20:54 2013] Mean detx,y = (1316.69, -2168.84) 
[Fri May 17 22:20:59 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 17 22:22:13 2013] Binned source spectrum to 10 counts/bin
[Fri May 17 22:22:14 2013] Setting source spectrum file to fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Fri May 17 22:22:14 2013] Setting bgd. spectrum file to fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Sat May 18 05:46:18 2013] Updating aperture counts using extracted products
[Sat May 18 05:46:18 2013] Total counts from fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src49_src_b10.pi.gz = 2205.00
[Sat May 18 05:46:18 2013] Total counts from fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src49_bgd.pi.gz = 8804.00
[Sat May 18 05:46:18 2013] Got source and background scale factors 1229081.000000, 24333163.000000
[Sat May 18 05:46:18 2013] User source parameters:
  Position = (325.0, 340.8) = 5 36 18.45 -6 20 39.9
  Extent = 5.6 (5.2-5.9)" x 5.1 (4.8-5.4)", rotation angle = 357 (350-0) degrees
  Source aperture counts = 1760.3 +/- 48.0
  Background aperture counts = 444.7
  Rate = 0.04 +/- 0.001

[Sat May 18 05:46:40 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 18 05:46:40 2013] Using photon index=1.80, rate=0.0349, arf fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src49.arf
[Sat May 18 05:46:40 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 18 05:46:40 2013] Updating source flux to 1.3e-13
[Sat May 18 05:49:43 2013] xmm0089940301/analysis//spectral/fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src49_pl.csv not found, spectral fit skipped or did not complete