[Fri May 17 01:16:57 2013] Detection parameters:
  Position = (468.2, 398.2) = 5 35 36.66 -6 16 31.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 462.0 +/- 25.7
  Background counts = 44.8
  Rate = 0.01 +/- 0.0005

[Fri May 17 01:17:00 2013] Off-axis axis estimate = 14.28'
[Fri May 17 01:23:50 2013] Using EEF radius (= 13.57 ")to estimate initial spatial extent for simple fitting
[Fri May 17 01:23:50 2013] Initial guess for spatial extent in simple fitting = 13.57"
[Fri May 17 01:23:50 2013] source mask rpix=3.1, npix_max = 52, mask sum = 28, frac = 0.534
[Fri May 17 01:23:50 2013] Giving source the simple spatial ID 33 for pass 0, mean size = 13.57"
[Fri May 17 06:47:01 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_src33.ximg exists
[Fri May 17 06:47:01 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_src33.csv
[Fri May 17 06:47:01 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_src33_1.ximg exists
[Fri May 17 06:47:01 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_src33.csv
[Fri May 17 06:47:01 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 06:47:03 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Fri May 17 06:47:03 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src33.csv
[Fri May 17 06:47:03 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Fri May 17 06:47:03 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src33.csv
[Fri May 17 06:47:03 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 12:36:45 2013] Spatial fit model total counts = -1990.910000, observed total counts = 1044.000000
[Fri May 17 12:36:45 2013] Poor agreement between spatial fit and data for source 34
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 17 12:36:45 2013] Source 34 is offset by 2.532503 and 9.534182 pixels which is larger than
2 X fitted extent = 1.464326 x 1.464326, not incorporating fit results
[Fri May 17 12:36:45 2013] Vigneting correction estimate = 1.000000
[Fri May 17 12:36:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 12:36:45 2013] Assessing source extent using major
[Fri May 17 12:36:45 2013] Source does appear to be extended
[Fri May 17 12:36:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 12:37:41 2013] Using EEF radius (= 13.57 ")to estimate initial spatial extent for simple fitting
[Fri May 17 12:37:41 2013] Initial guess for spatial extent in simple fitting = 13.57"
[Fri May 17 12:37:41 2013] source mask rpix=3.1, npix_max = 52, mask sum = 28, frac = 0.534
[Fri May 17 12:37:41 2013] Giving source the simple spatial ID 32 for pass 1, mean size = 13.57"
[Fri May 17 16:16:13 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_src32.ximg exists
[Fri May 17 16:16:13 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_src32.csv
[Fri May 17 16:16:13 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_src32_1.ximg exists
[Fri May 17 16:16:13 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_src32.csv
[Fri May 17 16:16:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 16:16:14 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Fri May 17 16:16:14 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src32.csv
[Fri May 17 16:16:14 2013] fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Fri May 17 16:16:14 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src32.csv
[Fri May 17 16:16:14 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 21:10:56 2013] Spatial fit model total counts = -2202.840000, observed total counts = 1044.000000
[Fri May 17 21:10:56 2013] Poor agreement between spatial fit and data for source 34
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 17 21:10:56 2013] Vigneting correction estimate = 1.000000
[Fri May 17 21:10:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 21:10:56 2013] Assessing source extent using major
[Fri May 17 21:10:56 2013] Source does appear to be extended
[Fri May 17 21:10:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 21:11:45 2013] XMMSAS src. selection expression = ellipse(40688.997772, 34599.143799, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 17 21:11:45 2013] Writing source region out to fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src34_src.reg
[Fri May 17 21:11:46 2013] Extracting stamp from image fullrun_pn_xmm0089940301_pi300-10000_cl_sm2.00.img.gz, (431, 361) - (506, 436)
[Fri May 17 21:11:46 2013] XMMSAS bgd. selection expression = annulus(40688.997772, 34599.143799, 1087.500000, 2175.000000, X, Y) && !ellipse(39484.965881, 32645.119232, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 17 21:11:46 2013] Writing fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src34.gif
[Fri May 17 22:02:13 2013] Mean detx,y = (13676.63, -6954.02) 
[Fri May 17 22:02:16 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 17 22:02:38 2013] Binned source spectrum to 10 counts/bin
[Fri May 17 22:02:38 2013] Setting source spectrum file to fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Fri May 17 22:02:38 2013] Setting bgd. spectrum file to fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Fri May 17 23:40:15 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 17 23:40:15 2013] rmf not generated due to insufficient counts
[Sat May 18 05:46:11 2013] Updating aperture counts using extracted products
[Sat May 18 05:46:11 2013] Total counts from fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src34_src_b10.pi.gz = 555.00
[Sat May 18 05:46:12 2013] Total counts from fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src34_bgd.pi.gz = 1133.00
[Sat May 18 05:46:12 2013] Got source and background scale factors 763772.000000, 4815016.000000
[Sat May 18 05:46:12 2013] User source parameters:
  Position = (468.2, 398.2) = 5 35 36.66 -6 16 31.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 375.3 +/- 24.6
  Background aperture counts = 179.7
  Rate = 0.009 +/- 0.0006

[Sat May 18 05:46:12 2013] Updating counts from extracted products
[Sat May 18 05:46:12 2013] Set source signif. to 375.28/13.41 = 27.99
[Sat May 18 05:46:38 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 18 05:46:38 2013] Using photon index=1.80, rate=0.00863, arf fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src34.arf
[Sat May 18 05:46:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 18 05:46:38 2013] Updating source flux to 9.2e-14
[Sat May 18 05:48:49 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 18 05:49:43 2013] xmm0089940301/analysis//spectral/fullrun_pn_xmm0089940301_pi300-10000_pass1_cl_src34_pl.csv not found, spectral fit skipped or did not complete