[Fri May 17 01:18:54 2013] Detection parameters:
  Position = (135.1, 374.1) = 5 37 13.86 -6 18 12.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 268.0 +/- 20.4
  Background counts = 19.1
  Rate = 0.005 +/- 0.0004

[Fri May 17 01:18:57 2013] Off-axis axis estimate = 13.05'
[Fri May 17 09:45:18 2013] Using EEF radius (= 12.95 ")to estimate initial spatial extent for simple fitting
[Fri May 17 09:45:18 2013] Initial guess for spatial extent in simple fitting = 12.95"
[Fri May 17 09:45:18 2013] source mask rpix=3.0, npix_max = 48, mask sum = 42, frac = 0.868
[Fri May 17 09:45:18 2013] Giving source the simple spatial ID 35 for pass 0, mean size = 12.95"
[Fri May 17 12:36:14 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_src35.ximg exists
[Fri May 17 12:36:14 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_src35_1.ximg exists
[Fri May 17 12:36:14 2013] Fit fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_src35 appears to have run properly
[Fri May 17 12:36:15 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Fri May 17 12:36:15 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Fri May 17 12:36:15 2013] Fit fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Fri May 17 12:37:16 2013] Spatial fit model total counts = 363.232000, observed total counts = 337.000000
[Fri May 17 12:37:16 2013] Offset between fit and detection position for source 9 = 0.252792 pixels
[Fri May 17 12:37:16 2013] 366.995000 total counts/ 194.895000 bgd. counts: snr = 12.327656
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.252792 pixels
  Position = (135.1, 374.3) = 5 37 13.86 -6 18 14.0
  Extent = 7.5 (6.4-9.1)" x 3.7 (3.2-4.3)", rotation angle = 116 (107-127) degrees
  Source counts = 172.1 +/- 19.2
  Background counts = 194.9
  Rate = 0.004 +/- 0.0004
[Fri May 17 12:37:17 2013] Vigneting correction estimate = 1.000000
[Fri May 17 12:37:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 12:37:17 2013] Assessing source extent using major axis lower bound
[Fri May 17 12:37:17 2013] Source does appear to be extended
[Fri May 17 12:37:17 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.47
[Fri May 17 18:28:33 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 17 18:28:33 2013] Initial guess for spatial extent in simple fitting = 5.59"
[Fri May 17 18:28:33 2013] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.940
[Fri May 17 18:28:33 2013] Giving source the simple spatial ID 35 for pass 1, mean size = 5.59"
[Fri May 17 21:10:36 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_src35.ximg exists
[Fri May 17 21:10:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_src35.csv
[Fri May 17 21:10:36 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_src35_1.ximg exists
[Fri May 17 21:10:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_src35.csv
[Fri May 17 21:10:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 21:10:37 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Fri May 17 21:10:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src35.csv
[Fri May 17 21:10:37 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Fri May 17 21:10:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src35.csv
[Fri May 17 21:10:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 21:11:22 2013] Warning, spatial fit 35 centroid is now closest to src. 10
[Fri May 17 21:11:22 2013] Vigneting correction estimate = 1.000000
[Fri May 17 21:11:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 21:11:22 2013] Assessing source extent using major axis lower bound
[Fri May 17 21:11:22 2013] Source does appear to be extended
[Fri May 17 21:11:22 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.47
[Sat May 18 02:52:23 2013] XMMSAS src. selection expression = ellipse(11704.877280, 32518.372400, 452.056213, 219.253806, 116.492563, X, Y)
[Sat May 18 02:52:23 2013] Writing source region out to fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src9_src.reg
[Sat May 18 02:52:23 2013] Extracting stamp from image fullrun_mos2_xmm0089940301_pi300-10000_cl_sm2.00.img.gz, (109, 348) - (161, 400)
[Sat May 18 02:52:23 2013] XMMSAS bgd. selection expression = annulus(11704.877280, 32518.372400, 753.427022, 1506.854043, X, Y)
[Sat May 18 02:52:23 2013] Writing fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src9.gif
[Sat May 18 03:23:38 2013] Mean detx,y = (15352.70, 5074.02) 
[Sat May 18 03:23:41 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 18 03:23:59 2013] Binned source spectrum to 10 counts/bin
[Sat May 18 03:24:00 2013] Setting source spectrum file to fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sat May 18 03:24:00 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sat May 18 05:47:23 2013] Updating aperture counts using extracted products
[Sat May 18 05:47:23 2013] Total counts from fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 176.00
[Sat May 18 05:47:23 2013] Total counts from fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src9_bgd.pi.gz = 233.00
[Sat May 18 05:47:23 2013] Got source and background scale factors 263896.000000, 3245618.000000
[Sat May 18 05:47:24 2013] User source parameters:
  Position = (135.1, 374.3) = 5 37 13.86 -6 18 14.0
  Extent = 7.5 (6.4-9.1)" x 3.7 (3.2-4.3)", rotation angle = 116 (107-127) degrees
  Source aperture counts = 157.1 +/- 14.3
  Background aperture counts = 18.9
  Rate = 0.003 +/- 0.0003

[Sat May 18 05:47:39 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 18 05:47:39 2013] Using photon index=1.80, rate=0.00361, arf fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src9.arf
[Sat May 18 05:47:39 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 18 05:47:39 2013] Updating source flux to 2.1e-13
[Sat May 18 05:48:49 2013] xmm0089940301/analysis//spectral/fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete