[Fri May 17 01:18:56 2013] Detection parameters:
  Position = (367.8, 269.3) = 5 36 5.97 -6 25 54.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.2 +/- 12.2
  Background counts = 30.3
  Rate = 0.001 +/- 0.0003

[Fri May 17 01:18:57 2013] Off-axis axis estimate = 5.45'
[Fri May 17 09:45:18 2013] Using EEF radius (= 9.15 ")to estimate initial spatial extent for simple fitting
[Fri May 17 09:45:18 2013] Initial guess for spatial extent in simple fitting = 9.15"
[Fri May 17 09:45:18 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.921
[Fri May 17 09:45:18 2013] Giving source the simple spatial ID 73 for pass 0, mean size = 9.15"
[Fri May 17 12:36:14 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_src73.ximg exists
[Fri May 17 12:36:14 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_src73.csv
[Fri May 17 12:36:14 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_src73_1.ximg exists
[Fri May 17 12:36:14 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_src73.csv
[Fri May 17 12:36:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 12:36:16 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src73.ximg exists
[Fri May 17 12:36:16 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src73.csv
[Fri May 17 12:36:16 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src73_1.ximg exists
[Fri May 17 12:36:16 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src73.csv
[Fri May 17 12:36:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 12:37:17 2013] Warning: source 73 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 64 at 11.616909 pixels away
[Fri May 17 12:37:17 2013] Vigneting correction estimate = 1.000000
[Fri May 17 12:37:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 12:37:17 2013] Assessing source extent using major
[Fri May 17 12:37:17 2013] Source does appear to be extended
[Fri May 17 12:37:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 12:37:17 2013] Source is confused with source 61
[Fri May 17 18:28:33 2013] Using EEF radius (= 9.15 ")to estimate initial spatial extent for simple fitting
[Fri May 17 18:28:33 2013] Initial guess for spatial extent in simple fitting = 9.15"
[Fri May 17 18:28:33 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.921
[Fri May 17 18:28:33 2013] Giving source the simple spatial ID 73 for pass 1, mean size = 9.15"
[Fri May 17 21:10:37 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_src73.ximg exists
[Fri May 17 21:10:37 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_src73_1.ximg exists
[Fri May 17 21:10:37 2013] Fit fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_src73 appears to have run properly
[Fri May 17 21:10:38 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src73.ximg exists
[Fri May 17 21:10:38 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src73_1.ximg exists
[Fri May 17 21:10:38 2013] Fit fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src73 appears to have run properly
[Fri May 17 21:11:22 2013] Spatial fit model total counts = 631.466000, observed total counts = 670.000000
[Fri May 17 21:11:22 2013] Offset between fit and detection position for source 64 = 9.901312 pixels
[Fri May 17 21:11:22 2013] 747.001000 total counts/ 485.992000 bgd. counts: snr = 11.839706
Spatial fit parameters:
  Offset between fit and detection position for source 64 = 9.901312 pixels
  Position = (359.7, 263.5) = 5 36 8.31 -6 26 16.3
  Extent = 18.3 (18.1-36.6)", rotation angle = 0
  Source counts = 261.0 +/- 27.3
  Background counts = 486.0
  Rate = 0.005 +/- 0.0006
[Fri May 17 21:11:22 2013] Vigneting correction estimate = 1.000000
[Fri May 17 21:11:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 21:11:22 2013] Assessing source extent using major axis lower bound
[Fri May 17 21:11:22 2013] Source does appear to be extended
[Fri May 17 21:11:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 18 02:52:24 2013] XMMSAS src. selection expression = ellipse(31249.450000, 22875.812000, 1098.474032, 1098.474032, 0.000000, X, Y)
[Sat May 18 02:52:24 2013] Writing source region out to fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src64_src.reg
[Sat May 18 02:52:24 2013] Extracting stamp from image fullrun_mos2_xmm0089940301_pi300-10000_cl_sm2.00.img.gz, (297, 200) - (423, 327)
[Sat May 18 02:52:24 2013] XMMSAS bgd. selection expression = annulus(31249.450000, 22875.812000, 1830.790053, 3661.580105, X, Y) && !ellipse(32207.262800, 23864.827800, 377.566411, 377.566411, 0.000000, X, Y) && !ellipse(29877.398220, 26103.547400, 400.265612, 304.556009, 22.393393, X, Y) && !ellipse(28509.274400, 20044.810200, 564.380816, 426.048812, 359.385837, X, Y) && !ellipse(31695.877228, 26056.127716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34667.537354, 18813.627289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27215.886993, 23085.144623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34378.332977, 25906.811523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28230.469269, 23281.449524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31269.483600, 24782.258600, 367.247211, 367.247211, 0.000000, X, Y) && !ellipse(29120.169586, 21573.194382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32534.133698, 24431.148895, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 18 02:52:24 2013] Writing fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src64.gif
[Sat May 18 03:39:56 2013] Mean detx,y = (-4261.80, -4636.13) 
[Sat May 18 03:39:58 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 18 03:41:13 2013] Binned source spectrum to 10 counts/bin
[Sat May 18 03:41:13 2013] Setting source spectrum file to fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src64_src_b10.pi.gz
[Sat May 18 03:41:13 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src64_bgd.pi.gz
[Sat May 18 05:47:34 2013] Updating aperture counts using extracted products
[Sat May 18 05:47:34 2013] Total counts from fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src64_src_b10.pi.gz = 415.00
[Sat May 18 05:47:34 2013] Total counts from fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src64_bgd.pi.gz = 2038.00
[Sat May 18 05:47:34 2013] Got source and background scale factors 3755040.000000, 20986523.000000
[Sat May 18 05:47:34 2013] User source parameters:
  Position = (359.7, 263.5) = 5 36 8.31 -6 26 16.3
  Extent = 18.3 (18.1-36.6)", rotation angle = 0
  Source aperture counts = 50.3 +/- 21.4
  Background aperture counts = 364.7
  Rate = 0.001 +/- 0.0004

[Sat May 18 05:47:41 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 18 05:47:41 2013] Using photon index=1.80, rate=0.00547, arf fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src64.arf
[Sat May 18 05:47:41 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 18 05:47:41 2013] Updating source flux to 7e-14
[Sat May 18 05:48:18 2013] Flag c found in src. 64 procflags, skipping spectral fitting
[Sat May 18 05:48:49 2013] xmm0089940301/analysis//spectral/fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src64_pl.csv not found, spectral fit skipped or did not complete