[Fri May 17 01:18:55 2013] Detection parameters:
  Position = (445.5, 317.1) = 5 35 43.27 -6 22 22.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92.7 +/- 13.4
  Background counts = 29.3
  Rate = 0.003 +/- 0.0005

[Fri May 17 01:18:57 2013] Off-axis axis estimate = 10.75'
[Fri May 17 09:45:18 2013] Using EEF radius (= 11.80 ")to estimate initial spatial extent for simple fitting
[Fri May 17 09:45:18 2013] Initial guess for spatial extent in simple fitting = 11.80"
[Fri May 17 09:45:18 2013] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.017
[Fri May 17 09:45:18 2013] Giving source the simple spatial ID 46 for pass 0, mean size = 11.80"
[Fri May 17 12:36:14 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_src46.ximg exists
[Fri May 17 12:36:14 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_src46_1.ximg exists
[Fri May 17 12:36:14 2013] Fit fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_src46 appears to have run properly
[Fri May 17 12:36:15 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src46.ximg exists
[Fri May 17 12:36:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src46.csv
[Fri May 17 12:36:15 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src46_1.ximg exists
[Fri May 17 12:36:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src46.csv
[Fri May 17 12:36:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 12:37:16 2013] Source 46 is offset by -8.328463 and 5.025919 pixels which is larger than
2 X fitted extent = 2.547425 x 1.692924, not incorporating fit results
[Fri May 17 12:37:17 2013] Vigneting correction estimate = 1.000000
[Fri May 17 12:37:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 12:37:17 2013] Assessing source extent using major
[Fri May 17 12:37:17 2013] Source does appear to be extended
[Fri May 17 12:37:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 18:28:33 2013] Using EEF radius (= 11.80 ")to estimate initial spatial extent for simple fitting
[Fri May 17 18:28:33 2013] Initial guess for spatial extent in simple fitting = 11.80"
[Fri May 17 18:28:33 2013] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.017
[Fri May 17 18:28:33 2013] Giving source the simple spatial ID 46 for pass 1, mean size = 11.80"
[Fri May 17 21:10:36 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_src46.ximg exists
[Fri May 17 21:10:36 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_src46_1.ximg exists
[Fri May 17 21:10:36 2013] Fit fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_src46 appears to have run properly
[Fri May 17 21:10:37 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src46.ximg exists
[Fri May 17 21:10:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src46.csv
[Fri May 17 21:10:37 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src46_1.ximg exists
[Fri May 17 21:10:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src46.csv
[Fri May 17 21:10:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 21:11:22 2013] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 46 at 10.019488 pixels away
[Fri May 17 21:11:22 2013] Warning: source 46 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 46 at 12.060536 pixels away
[Fri May 17 21:11:22 2013] Vigneting correction estimate = 1.000000
[Fri May 17 21:11:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 21:11:22 2013] Assessing source extent using major
[Fri May 17 21:11:22 2013] Source does appear to be extended
[Fri May 17 21:11:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 18 02:52:23 2013] XMMSAS src. selection expression = ellipse(38713.419678, 27539.558960, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 18 02:52:23 2013] Writing source region out to fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src46_src.reg
[Sat May 18 02:52:23 2013] Extracting stamp from image fullrun_mos2_xmm0089940301_pi300-10000_cl_sm2.00.img.gz, (408, 280) - (483, 355)
[Sat May 18 02:52:23 2013] XMMSAS bgd. selection expression = annulus(38713.419678, 27539.558960, 1087.500000, 2175.000000, X, Y) && !ellipse(36460.420227, 27094.990234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39406.486662, 27063.943400, 457.411213, 317.479209, 94.432260, X, Y) && !ellipse(40508.459200, 26252.211740, 440.352013, 266.151208, 86.799886, X, Y)
[Sat May 18 02:52:23 2013] Writing fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src46.gif
[Sat May 18 03:28:06 2013] Mean detx,y = (-11640.80, -114.19) 
[Sat May 18 03:28:08 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 18 03:28:27 2013] Binned source spectrum to 10 counts/bin
[Sat May 18 03:28:28 2013] Setting source spectrum file to fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Sat May 18 03:28:28 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Sat May 18 05:28:46 2013] Not generating rmf since there are only 92 counts
[Sat May 18 05:28:46 2013] rmf not generated due to insufficient counts
[Sat May 18 05:47:28 2013] Updating aperture counts using extracted products
[Sat May 18 05:47:28 2013] Total counts from fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src46_src_b10.pi.gz = 223.00
[Sat May 18 05:47:28 2013] Total counts from fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src46_bgd.pi.gz = 962.00
[Sat May 18 05:47:28 2013] Got source and background scale factors 1326844.000000, 9632500.000000
[Sat May 18 05:47:28 2013] User source parameters:
  Position = (445.5, 317.1) = 5 35 43.27 -6 22 22.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 90.5 +/- 16.0
  Background aperture counts = 132.5
  Rate = 0.002 +/- 0.0003

[Sat May 18 05:47:28 2013] Updating counts from extracted products
[Sat May 18 05:47:28 2013] Set source signif. to 90.49/11.51 = 7.86
[Sat May 18 05:47:40 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 18 05:47:40 2013] Using photon index=1.80, rate=0.0019, arf fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src46.arf
[Sat May 18 05:47:40 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 18 05:47:40 2013] Updating source flux to 3.8e-14
[Sat May 18 05:48:18 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 18 05:48:49 2013] xmm0089940301/analysis//spectral/fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src46_pl.csv not found, spectral fit skipped or did not complete