[Fri May 17 01:18:55 2013] Detection parameters:
  Position = (394.6, 319.6) = 5 35 58.14 -6 22 11.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 81.8 +/- 13.0
  Background counts = 32.2
  Rate = 0.002 +/- 0.0004

[Fri May 17 01:18:57 2013] Off-axis axis estimate = 7.14'
[Fri May 17 09:45:18 2013] Using EEF radius (= 10.00 ")to estimate initial spatial extent for simple fitting
[Fri May 17 09:45:18 2013] Initial guess for spatial extent in simple fitting = 10.00"
[Fri May 17 09:45:18 2013] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.798
[Fri May 17 09:45:18 2013] Giving source the simple spatial ID 56 for pass 0, mean size = 10.00"
[Fri May 17 12:36:14 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_src56.ximg exists
[Fri May 17 12:36:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_src56.csv
[Fri May 17 12:36:14 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_src56_1.ximg exists
[Fri May 17 12:36:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_src56.csv
[Fri May 17 12:36:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 12:36:15 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src56.ximg exists
[Fri May 17 12:36:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src56.csv
[Fri May 17 12:36:15 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src56_1.ximg exists
[Fri May 17 12:36:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src56.csv
[Fri May 17 12:36:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 12:37:16 2013] Warning: source 56 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 45 at 12.884422 pixels away
[Fri May 17 12:37:17 2013] Vigneting correction estimate = 1.000000
[Fri May 17 12:37:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 12:37:17 2013] Assessing source extent using major
[Fri May 17 12:37:17 2013] Source does appear to be extended
[Fri May 17 12:37:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 18:28:33 2013] Using EEF radius (= 10.00 ")to estimate initial spatial extent for simple fitting
[Fri May 17 18:28:33 2013] Initial guess for spatial extent in simple fitting = 10.00"
[Fri May 17 18:28:33 2013] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.798
[Fri May 17 18:28:33 2013] Giving source the simple spatial ID 56 for pass 1, mean size = 10.00"
[Fri May 17 21:10:36 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_src56.ximg exists
[Fri May 17 21:10:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_src56.csv
[Fri May 17 21:10:36 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_src56_1.ximg exists
[Fri May 17 21:10:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_src56.csv
[Fri May 17 21:10:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 21:10:37 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src56.ximg exists
[Fri May 17 21:10:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src56.csv
[Fri May 17 21:10:37 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src56_1.ximg exists
[Fri May 17 21:10:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src56.csv
[Fri May 17 21:10:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 21:11:22 2013] Warning: source 56 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 45 at 11.894619 pixels away
[Fri May 17 21:11:22 2013] Vigneting correction estimate = 1.000000
[Fri May 17 21:11:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 21:11:22 2013] Assessing source extent using major
[Fri May 17 21:11:22 2013] Source does appear to be extended
[Fri May 17 21:11:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 18 02:52:23 2013] XMMSAS src. selection expression = ellipse(34280.203094, 27757.388184, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 18 02:52:23 2013] Writing source region out to fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src45_src.reg
[Sat May 18 02:52:23 2013] Extracting stamp from image fullrun_mos2_xmm0089940301_pi300-10000_cl_sm2.00.img.gz, (357, 282) - (432, 357)
[Sat May 18 02:52:23 2013] XMMSAS bgd. selection expression = annulus(34280.203094, 27757.388184, 1087.500000, 2175.000000, X, Y) && !ellipse(36460.420227, 27094.990234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31973.625153, 30765.881531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31695.877228, 26056.127716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32502.050140, 29514.499600, 445.712013, 231.029607, 321.382900, X, Y) && !ellipse(34378.332977, 25906.811523, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 18 02:52:23 2013] Writing fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src45.gif
[Sat May 18 03:32:55 2013] Mean detx,y = (-7174.98, 95.67) 
[Sat May 18 03:32:57 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 18 03:33:21 2013] Binned source spectrum to 10 counts/bin
[Sat May 18 03:33:21 2013] Setting source spectrum file to fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Sat May 18 03:33:21 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Sat May 18 05:36:03 2013] Not generating rmf since there are only 81 counts
[Sat May 18 05:36:03 2013] rmf not generated due to insufficient counts
[Sat May 18 05:47:30 2013] Updating aperture counts using extracted products
[Sat May 18 05:47:30 2013] Total counts from fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src45_src_b10.pi.gz = 179.00
[Sat May 18 05:47:30 2013] Total counts from fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src45_bgd.pi.gz = 820.00
[Sat May 18 05:47:31 2013] Got source and background scale factors 1113162.000000, 8260925.000000
[Sat May 18 05:47:31 2013] User source parameters:
  Position = (394.6, 319.6) = 5 35 58.14 -6 22 11.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 68.5 +/- 14.4
  Background aperture counts = 110.5
  Rate = 0.001 +/- 0.0003

[Sat May 18 05:47:31 2013] Updating counts from extracted products
[Sat May 18 05:47:31 2013] Set source signif. to 68.50/10.51 = 6.52
[Sat May 18 05:47:40 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 18 05:47:40 2013] Using photon index=1.80, rate=0.00144, arf fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src45.arf
[Sat May 18 05:47:40 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 18 05:47:40 2013] Updating source flux to 2.2e-14
[Sat May 18 05:48:18 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 18 05:48:49 2013] xmm0089940301/analysis//spectral/fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src45_pl.csv not found, spectral fit skipped or did not complete