[Fri May 17 01:18:55 2013] Detection parameters: Position = (316.6, 323.8) = 5 36 20.90 -6 21 54.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 156.2 +/- 16.5 Background counts = 33.8 Rate = 0.004 +/- 0.0004 [Fri May 17 01:18:57 2013] Off-axis axis estimate = 2.26' [Fri May 17 09:45:18 2013] Using EEF radius (= 7.56 ")to estimate initial spatial extent for simple fitting [Fri May 17 09:45:18 2013] Initial guess for spatial extent in simple fitting = 7.56" [Fri May 17 09:45:18 2013] source mask rpix=1.7, npix_max = 20, mask sum = 12, frac = 0.599 [Fri May 17 09:45:18 2013] Giving source the simple spatial ID 42 for pass 0, mean size = 7.56" [Fri May 17 12:36:14 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_src42.ximg exists [Fri May 17 12:36:14 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_src42_1.ximg exists [Fri May 17 12:36:14 2013] Fit fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_src42 appears to have run properly [Fri May 17 12:36:15 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src42.ximg exists [Fri May 17 12:36:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src42.csv [Fri May 17 12:36:15 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists [Fri May 17 12:36:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src42.csv [Fri May 17 12:36:15 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src42_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 17 12:37:16 2013] Warning, spatial fit 42 centroid is now closest to src. 44 [Fri May 17 12:37:17 2013] Spatial fit model total counts = 721.973000, observed total counts = 336.000000 [Fri May 17 12:37:17 2013] Poor agreement between spatial fit and data for source 43 It may help to tweak spatial fit manually Not incorporating fit results [Fri May 17 12:37:17 2013] Vigneting correction estimate = 1.000000 [Fri May 17 12:37:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 17 12:37:17 2013] Assessing source extent using major [Fri May 17 12:37:17 2013] Source does appear to be extended [Fri May 17 12:37:17 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri May 17 18:28:33 2013] Using EEF radius (= 7.56 ")to estimate initial spatial extent for simple fitting [Fri May 17 18:28:33 2013] Initial guess for spatial extent in simple fitting = 7.56" [Fri May 17 18:28:33 2013] source mask rpix=1.7, npix_max = 20, mask sum = 12, frac = 0.599 [Fri May 17 18:28:33 2013] Giving source the simple spatial ID 42 for pass 1, mean size = 7.56" [Fri May 17 21:10:36 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_src42.ximg exists [Fri May 17 21:10:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_src42.csv [Fri May 17 21:10:36 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_src42_1.ximg exists [Fri May 17 21:10:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_src42.csv [Fri May 17 21:10:36 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_src42_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 17 21:10:37 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src42.ximg exists [Fri May 17 21:10:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src42.csv [Fri May 17 21:10:37 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists [Fri May 17 21:10:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src42.csv [Fri May 17 21:10:37 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src42_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 17 21:11:22 2013] Warning, spatial fit 42 centroid is now closest to src. 42 [Fri May 17 21:11:22 2013] Spatial fit model total counts = 411.614000, observed total counts = 336.000000 [Fri May 17 21:11:22 2013] Poor agreement between spatial fit and data for source 43 It may help to tweak spatial fit manually Not incorporating fit results [Fri May 17 21:11:22 2013] Vigneting correction estimate = 1.000000 [Fri May 17 21:11:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 17 21:11:22 2013] Assessing source extent using major [Fri May 17 21:11:22 2013] Source does appear to be extended [Fri May 17 21:11:22 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat May 18 02:52:23 2013] XMMSAS src. selection expression = ellipse(27494.611969, 28120.439545, 652.500000, 652.500000, 0.000000, X, Y) [Sat May 18 02:52:23 2013] Writing source region out to fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src43_src.reg [Sat May 18 02:52:23 2013] Extracting stamp from image fullrun_mos2_xmm0089940301_pi300-10000_cl_sm2.00.img.gz, (279, 286) - (354, 361) [Sat May 18 02:52:23 2013] XMMSAS bgd. selection expression = annulus(27494.611969, 28120.439545, 1087.500000, 2175.000000, X, Y) && !ellipse(28259.908234, 29603.116760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29877.398220, 26103.547400, 400.265612, 304.556009, 22.393393, X, Y) && !ellipse(28115.562256, 27854.171967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25480.772000, 26546.958200, 476.627214, 225.479206, 33.477550, X, Y) && !ellipse(26466.633200, 27515.730620, 393.918411, 272.941608, 47.879600, X, Y) && !ellipse(26821.681519, 30848.861816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27014.407440, 28665.225006, 870.000000, 870.000000, 0.000000, X, Y) [Sat May 18 02:52:23 2013] Writing fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src43.gif [Sat May 18 03:26:30 2013] Mean detx,y = (-460.19, 508.78) [Sat May 18 03:26:32 2013] Setting backscal keywords in source and bgd. spectrum [Sat May 18 03:26:48 2013] Binned source spectrum to 10 counts/bin [Sat May 18 03:26:48 2013] Setting source spectrum file to fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src43_src_b10.pi.gz [Sat May 18 03:26:48 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src43_bgd.pi.gz [Sat May 18 05:27:28 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sat May 18 05:27:28 2013] rmf not generated due to insufficient counts [Sat May 18 05:47:26 2013] Updating aperture counts using extracted products [Sat May 18 05:47:26 2013] Total counts from fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src43_src_b10.pi.gz = 326.00 [Sat May 18 05:47:26 2013] Total counts from fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src43_bgd.pi.gz = 851.00 [Sat May 18 05:47:26 2013] Got source and background scale factors 1138232.000000, 7332492.000000 [Sat May 18 05:47:26 2013] User source parameters: Position = (316.6, 323.8) = 5 36 20.90 -6 21 54.4 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 193.9 +/- 19.1 Background aperture counts = 132.1 Rate = 0.004 +/- 0.0004 [Sat May 18 05:47:26 2013] Updating counts from extracted products [Sat May 18 05:47:26 2013] Set source signif. to 193.90/11.49 = 16.87 [Sat May 18 05:47:39 2013] Calculating source flux in energy range 0.30-8.00 [Sat May 18 05:47:39 2013] Using photon index=1.80, rate=0.00407, arf fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src43.arf [Sat May 18 05:47:39 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat May 18 05:47:39 2013] Updating source flux to 5.4e-14 [Sat May 18 05:48:18 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sat May 18 05:48:49 2013] xmm0089940301/analysis//spectral/fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src43_pl.csv not found, spectral fit skipped or did not complete