[Fri May 17 01:18:53 2013] Detection parameters:
  Position = (302.9, 383.8) = 5 36 24.89 -6 17 33.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3361.4 +/- 71.7
  Background counts = 28.5
  Rate = 0.1 +/- 0.002

[Fri May 17 01:18:57 2013] Off-axis axis estimate = 6.20'
[Fri May 17 09:45:18 2013] Using EEF radius (= 9.53 ")to estimate initial spatial extent for simple fitting
[Fri May 17 09:45:18 2013] Initial guess for spatial extent in simple fitting = 9.53"
[Fri May 17 09:45:18 2013] source mask rpix=2.2, npix_max = 28, mask sum = 32, frac = 1.105
[Fri May 17 09:45:18 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 9.53"
[Fri May 17 12:36:13 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_src1.ximg exists
[Fri May 17 12:36:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_src1.csv
[Fri May 17 12:36:13 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri May 17 12:36:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_src1.csv
[Fri May 17 12:36:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 12:36:14 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri May 17 12:36:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri May 17 12:36:14 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri May 17 12:36:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri May 17 12:36:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 12:37:16 2013] Warning, spatial fit 1 centroid is now closest to src. 29
[Fri May 17 12:37:16 2013] Warning: source 60 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 12.765136 pixels away
[Fri May 17 12:37:17 2013] Vigneting correction estimate = 1.000000
[Fri May 17 12:37:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 12:37:17 2013] Assessing source extent using major
[Fri May 17 12:37:17 2013] Source does appear to be extended
[Fri May 17 12:37:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 18:28:33 2013] Using EEF radius (= 9.53 ")to estimate initial spatial extent for simple fitting
[Fri May 17 18:28:33 2013] Initial guess for spatial extent in simple fitting = 9.53"
[Fri May 17 18:28:33 2013] source mask rpix=2.2, npix_max = 28, mask sum = 32, frac = 1.105
[Fri May 17 18:28:33 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 9.53"
[Fri May 17 21:10:36 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_src1.ximg exists
[Fri May 17 21:10:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_src1.csv
[Fri May 17 21:10:36 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri May 17 21:10:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_src1.csv
[Fri May 17 21:10:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 21:10:37 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri May 17 21:10:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri May 17 21:10:37 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri May 17 21:10:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri May 17 21:10:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 21:11:22 2013] Warning, spatial fit 1 centroid is now closest to src. 29
[Fri May 17 21:11:22 2013] Vigneting correction estimate = 1.000000
[Fri May 17 21:11:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 21:11:22 2013] Assessing source extent using major
[Fri May 17 21:11:22 2013] Source does appear to be extended
[Fri May 17 21:11:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 18 02:52:19 2013] Counts = 3361.448975, rescaling region sizes by 2.000000
[Sat May 18 02:52:19 2013] XMMSAS src. selection expression = ellipse(26304.633148, 33345.574371, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat May 18 02:52:19 2013] Writing source region out to fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src3_src.reg
[Sat May 18 02:52:19 2013] Extracting stamp from image fullrun_mos2_xmm0089940301_pi300-10000_cl_sm2.00.img.gz, (228, 309) - (378, 459)
[Sat May 18 02:52:20 2013] XMMSAS bgd. selection expression = annulus(26304.633148, 33345.574371, 4350.000000, 8700.000000, X, Y) && !ellipse(34006.050079, 34578.508911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33571.456000, 35348.432000, 1833.192053, 1098.232032, 245.593000, X, Y) && !ellipse(29442.134000, 33272.104000, 814.760023, 283.534408, 350.169190, X, Y) && !ellipse(30639.275400, 30350.020200, 371.835211, 307.629609, 315.772527, X, Y) && !ellipse(28304.637512, 37601.522614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30953.074000, 32042.866700, 427.482412, 291.002408, 45.665400, X, Y) && !ellipse(31770.884460, 37077.273804, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28259.908234, 29603.116760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32379.255000, 40631.855600, 774.313622, 291.428808, 18.620600, X, Y) && !ellipse(34557.635071, 35632.255524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31973.625153, 30765.881531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29877.398220, 26103.547400, 400.265612, 304.556009, 22.393393, X, Y) && !ellipse(17554.730545, 30592.770966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31695.877228, 26056.127716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29360.747101, 38433.659241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30325.488240, 27515.388400, 395.067211, 395.067211, 0.000000, X, Y) && !ellipse(34483.211945, 40661.340332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30992.078400, 33747.553200, 480.420814, 280.922408, 30.042382, X, Y) && !ellipse(33459.796387, 35763.135193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31697.601200, 31693.370200, 208.950406, 208.950406, 0.000000, X, Y) && !ellipse(27494.611969, 28120.439545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28115.562256, 27854.171967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21729.103012, 38123.557129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25480.772000, 26546.958200, 476.627214, 225.479206, 33.477550, X, Y) && !ellipse(26466.633200, 27515.730620, 393.918411, 272.941608, 47.879600, X, Y) && !ellipse(23970.580963, 39202.683167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28651.992340, 33430.689301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34280.203094, 27757.388184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30794.834625, 41811.015808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26821.681519, 30848.861816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27430.641693, 33568.278229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32502.050140, 29514.499600, 445.712013, 231.029607, 321.382900, X, Y) && !ellipse(22865.608215, 37076.971130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34378.332977, 25906.811523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25756.323800, 24442.375000, 396.620011, 396.620011, 0.000000, X, Y) && !ellipse(31269.483600, 24782.258600, 367.247211, 367.247211, 0.000000, X, Y) && !ellipse(27014.407440, 28665.225006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32534.133698, 24431.148895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32142.933716, 38159.349579, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 18 02:52:20 2013] Writing fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src3.gif
[Sat May 18 02:52:39 2013] Mean detx,y = (734.92, 5744.26) 
[Sat May 18 02:52:43 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 18 02:54:59 2013] Binned source spectrum to 10 counts/bin
[Sat May 18 02:55:00 2013] Setting source spectrum file to fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat May 18 02:55:00 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat May 18 03:43:55 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 18 03:43:55 2013] rmf not generated due to insufficient counts
[Sat May 18 05:47:11 2013] Updating aperture counts using extracted products
[Sat May 18 05:47:11 2013] Total counts from fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 3546.00
[Sat May 18 05:47:12 2013] Total counts from fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src3_bgd.pi.gz = 13339.00
[Sat May 18 05:47:12 2013] Got source and background scale factors 4456568.000000, 135642437.000000
[Sat May 18 05:47:12 2013] User source parameters:
  Position = (302.9, 383.8) = 5 36 24.89 -6 17 33.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 3107.7 +/- 60.6
  Background aperture counts = 438.3
  Rate = 0.07 +/- 0.001

[Sat May 18 05:47:12 2013] Updating counts from extracted products
[Sat May 18 05:47:12 2013] Set source signif. to 3107.74/20.93 = 148.45
[Sat May 18 05:47:37 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 18 05:47:37 2013] Using photon index=1.80, rate=0.0652, arf fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src3.arf
[Sat May 18 05:47:37 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 18 05:47:37 2013] Updating source flux to 1e-12
[Sat May 18 05:48:18 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 18 05:48:49 2013] xmm0089940301/analysis//spectral/fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete